| Content |
- Simple to set up and use
- 2 x 4 channel frequency plan for enhanced flexibility
- Rack mountable for easy installation
- Intuitive receiver and transmitter controls
- ATR35cW omnidirectional condenser lavalier microphone
- Up to 10 hours battery life
- Designed for quick and easy use
- Frequency plan of 2 groups of 4 channels for increased flexibility
- Perfect balance between price and performance
- Discreet and robust pocket transmitter
- RF transmission power 10mW
- Up to 10 hours with 2 x 1.5V AA batteries
- Comes with ATR35cW omnidirectional condenser lavalier microphone
- RF Indicator light
- Robust construction of superior quality components
Introducing AT-One, Audio-Technicaʼs entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.
AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-Oneʼs frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.
Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11/PF comes equipped with the ATR35cW tie-clip microphone.
- Designed for quick and easy use
- Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
- The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap
- Users can choose up to 4 channels in a group
- The ATW-11F system is equipped with a discreet and robust pocket transmitter
- RF Transmitting power 10mW
- Comes with an ATR35cW miniature omnidirectional condenser microphone
- Up to 10 hours' battery life with 2 x 1.5V AA batteries
- RF Indicator light
- Robust construction from high quality components
- Delivered in a transport case with a rack mount kit and detachable antennas
"2 X 4 Channels”
AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group.
"rf light indicator”
The display on the half-rack receiver clearly indicates both the RF and AF levels.
"12v power”
The ATW-R1F receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component.
|
AKG WMS 420 Presenter Set Band M, UHF Wireless-System, True Diversity, up to 8 frequencies parallel, 50 mW transmitted power, Low-Battery-LED on transmitter, 9,5" receiver, removeable BNC-antennas, pocket transmtter with C417L lapel microphone, condenser, omni-directional, 3 pin TQG connector, silent On-Mute-Off-switch, charging contacts for optional CU 400, works with 1x 1,5 Volt AA battery, Outputs: XLR (bal.) and jack (unbal.), frequency band M 826,300 - 831,000 MHz |
The AVX-MKE2 SET includes a bodypack transmitter with lavalier microphone, the plug on receiver and all accesories to operate out of the box with camcorders as well as DSLR cameras. It features self configuring digital transmission which eliminates time-consuming radio frequency setup. The ultra compact receiver rotates around the XLR connector to avoid collision with other devices mounted on your camera. It switches on and off automatically with your camera - saving battery power. The AVX matches perfectly to your camera's input sensitivity without having to adjust the audio level on the microphone. From professional wedding video to documentaries, from street interviews to corporate videos, the AVX just works allowing you to concentrate on creativity.
Features
Very fast setup
Plugs directly into XLR audio input
Ultra compact receiver
Switches on/off by P48 Phantom power
Optimized dynamic range
Auto frequency management
AES 256 encryption
License free
Accessories included for DSLR use
Metal housing
Made in Germany
|
- Diversity UHF wireless system with FM technology
- 12 selectable channels
- 100 m transmission range in ideal conditions
- Simultaneous operation of up to 6 systems
- ASC infrared transmitter and receiver syncing
- Pilot tone squelch
- 10 h transmitter operation on two AA batteries
- Metal housing
- Optional rackmount kit available as accessory
Developed in Germany, the UHF diversity wireless systems from the U300® series deliver excellent audio performance. They achieve a range of 100 metres in ideal conditions and are available in five frequency bands: 584–608 MHz, 655–679 MHz, 823–832 MHz + 863–865 MHz, 470–490 MHz or 514–542 MHz. Up to six U300® systems can be used simultaneously in each frequency band. Convenient one-touch synchronisation via infrared ensures fast, problem-free wireless connection between the transmitter and receiver, while a squelch with pilot tone ensures disruption-free operation.
U300® transmitters have a 10 mW output and an operating time of 10 hours on two AA batteries. The handheld microphone’s frequency response ranges from 55 Hz to 16 KHz. With a lower cut-off frequency of 25 Hz, the bodypack is also suitable for transmitting 5-string bass guitars with a deep H string. The bodypack’s input level can be adjusted to both active and passive guitars and basses over three levels. The power switch features a handy standby mode for temporary muting. The U300® receiver is fitted with a bright LCD channel display, an LED chain for displaying audio signal strength and both a balanced XLR and an unbalanced 6.35 mm audio output. The audio output can also be switched to instrument level for directly connecting to guitar and bass amplifiers.
U300®-series wireless systems feature a fresh, modern design and are available as vocal sets with receiver and dynamic handheld microphone with cardioid characteristic, bodypack and headset or bodypack and lavalier microphone. The microphone characteristic can be changed using U500®-series replaceable heads. U300® instrument sets are available with bodypack and clip-on microphone for wind instruments or a double-shielded low-capacitance cable for guitars and basses.
Product type
Wireless Microphone Systems
Type
Set
Transmission frequency range
655 - 679 MHz
Weight
0,83 kg
LDU306R - LD Systems U306 R Empfänger
Product type
Wireless Microphone System Accessories
Type
Receivers
Modulation Type
FM
Frequency response
25 - 16,000 Hz
Channels
12
Groups
1
Antenna inputs
2 x fixed
Noise reduction
Squelch
Transmission optimization
Pilot tone
THD
< 0.3 %
Signal-to-noise ratio
104 dB
Controls
ASC Sync , Channel down , Channel up , Line/Instrument Level , Power , volume
Indicators
5 LED VU meters , Antenna A/B , LC display
Audio output, balanced
XLR
Operating voltage
12 V DC - 18 V DC (500 mA), external power supply
Audio output, unbalanced
6.3 mm jack, switchable unbalanced output level
Accessories (included)
2 x AA battery , Audio cable , Power supply
Width
211 mm
Max. output level
+10 dBu (Bal), +7 dBV (Unbal, Line), +2,5 dBV (Unbal, Instr) dBu
Weight
0,7 kg
Height
43 mm
Depth
120 mm
Other features
IR frequency synchronisation
LDU306BP - LD Systems U306 BP Bodypack Sender
Type
Bodypack
Inputs
Mini-XLR (Phantom Powered Low-Z / High-Z Instrument)
Rated HF output power
10 mW
Controls
Gain (3-way switch) , Power On/Off
Indicators
ASC IR Sync (Green/Amber Blinking LED) , Battery (low battery: red) , Power LED (Power ON: green)
Operating voltage
2 x AA battery
Operating time
> 10 hrs.
Width
65 mm
Weight
0,085 kg
Height
91 mm
Depth
25 mm
Other features
Belt clip , Pilot tone
LDWS100ML - LD Systems WS 100 ML Lavalier Mikrofon
Type
Microphones
Frequency response
20 - 20.000 Hz
Directivity
Cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Accessories (included)
Attaching clip , Foam windscreen
Weight
0,026 kg |
Set with portable 3.5mm TRS transmitter and portable 3.5mm receiver without a lavalier microphone
General Characteristics
- Wireless entry-level plug & play series operating in the 2.4 GHz spectrum for license-free worldwide use
- Lightweight, compact plug-on transmitters and receivers, offering either XLR, jack (6.3mm, 1/4”) or mini jack (3.5mm, 1/8”) connections as well as a pedalboard receiver with female jack and XLR male chassis outputs
- Intuitive single-button interface to manage all power, linking, muting and battery monitoring tasks
- Up to 5 systems can be operated simultaneously at a maximum range of up to 75m
- All portable devices feature USB re-chargeable lithium-ion batteries that provide up to 5 hours of runtime
Delivery Includes:
- XSW-D-Mini-Jack-Tx 3.5mm female socket portable transmitter
- XSW-D-Mini-Jack-Rx female socket portable receiver
- Belt clip for the XSW-D-Mini-Jack-Tx transmitter
- Cold shoe mount
- 3.5mm coiled cable
- USB-A to USB-C charging cable
|
- DESCRIPTION
The Wireless GO II Single is an extremely versatile and ultra-compact wireless microphone system consisting of a dual receiver and single transmitter. Features a high-quality microphone built into the transmitter for completely wireless operation, flexible output for connecting to cameras, computers and smartphones, extended transmission range, over 40 hours of on-board recording and much more, Wireless GO II Single is the perfect microphone for a wide range of content creation applications.
- Ultra-compact wireless microphone system
- Series IV 2.4GHz digital transmission with 128-bit encryption delivers 200m range (line of sight)
- 3.5mm TRS analog output, USB-C and iOS compatible digital audio output
- In-built rechargeable lithium-ion battery – up to 7 hours battery life
- On-board recording – over 40 hours of internal memory
- Advanced features accessible via RODE Central including safety channel, flexible gain control (three-stage pad, expandable to 10-stage) and more
ACOUSTIC & ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
- Acoustic Principle: Pre-polarised pressure transducer
- Polar Pattern: Omnidirectional
- Frequency Range: 50Hz – 20kHz
- Maximum SPL (Mic): 100 dB SPL (1kHz @ 1m) dBu
- Maximum Input Level (3.5mm): -20dBV
- Microphone Preamp Gain: 20dB
- Equivalent Noise Level (A-Weighted): 22dBA
- Power Requirements: In-built rechargeable lithiumion battery charged via USB 5V, 0.3A
- Operating Time: Up to 7 hours
- Analog Inputs: 3.5mm TRS (lavalier microphone input)
- Analog Outputs: 3.5mm TRS
- Transmission Range: 200m (line of sight)
- Computer Connectivity: USB Type-C
- Operating System Requirements: macOS 10.11 above / Windows 10 and above
- Weight (grams): TX: 30g RX: 32g
- Dimensions (millimetres):TX Length: 44 x Width: 45.3 x Height: 18.3 / RX Length: 44 x Width: 45.5 x Height: 18.3
Included Accessories:
- 2 x Fur Windshields
- 2 x USB-C Cables
- 1 x SC5 3.5mm TRS
|
Reviews
There are no reviews yet.