Audio Technica AT2010 Cardioid condenser handheld microphone

112.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: AT2010 Category:
The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, […]

 

Read more

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.

  • Extended frequency response and superior transient response for smooth, natural sonic characteristics
  • High SPL-handling and wide dynamic range provide unmatched versatility
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal and construction for years of trouble-free service
  • Quiet-Flex stand clamp provides silent, flexible microphone positioning
  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 40-20,000 Hz
  • Open Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 113 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 71 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 48V DC, 2 mA typical
  • Weight: 233 g (8.2 oz)
  • Dimensions: 179.1 mm (7.05“) long, 50.8 mm (2.00“) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8470 Quiet-Flex stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica AT2010 Cardioid condenser handheld microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica AT2010 Cardioid condenser handheld microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments removeAKG SE300B - Preamp unit removeRODE NT-3 MULTI POWERED 3-4 removeFOSTEX MC10M MULTIPOLAR CONDENSER MICROPHONE removeSENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE remove
NameAudio Technica AT2010 Cardioid condenser handheld microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments removeAKG SE300B - Preamp unit removeRODE NT-3 MULTI POWERED 3-4 removeFOSTEX MC10M MULTIPOLAR CONDENSER MICROPHONE removeSENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE remove
Image
SKUAT2010C 411PPSE 300BH11RD00004MC10MH10SE00089
Rating
Price 112.00 incl. GR VAT 164.00 incl. GR VAT 178.00 incl. GR VAT 250.00 incl. GR VAT 95.50 incl. GR VAT 189.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

In stock

AvailabilityIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)In stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.

  • Extended frequency response and superior transient response for smooth, natural sonic characteristics
  • High SPL-handling and wide dynamic range provide unmatched versatility
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal and construction for years of trouble-free service
  • Quiet-Flex stand clamp provides silent, flexible microphone positioning
  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 40-20,000 Hz
  • Open Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 113 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 71 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 48V DC, 2 mA typical
  • Weight: 233 g (8.2 oz)
  • Dimensions: 179.1 mm (7.05“) long, 50.8 mm (2.00“) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8470 Quiet-Flex stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
  Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound. C 411 PP: For hardwire applications, with standard XLR connector for phantom powering.

Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

NT3 - Versatile & Dependable Stylish and modern, the NT3 is a studio and location workhorse. With both 48V phantom and internal 9V battery operation, this R?DE is at home anywhere. Intended for studio, stage and location work, this versatile handheld or stand mounted microphone incorporates a true externally polarized condenser (hyper- cardioid polar response) transducer with an internal capsule shock mounting system, and an ultra-low noise electronic circuit that has a high immunity to R.F. interference. Incorporating a rugged welded and heat-treated mesh head and all metal body. The NT3 is supplied in a zip pouch with a windshield, stand mount and thread adaptor. SPECIFICATIONS: Acoustic principle: Externally polarised 19mm (3/4“) condenser Directional pattern:  Hypercardioid Frequency range:  20Hz-20 kHz Output impedance:  200? Signal noise ratio din iec 651:  > 77dB (per IEC268-15) Equvalent noise:  123dB (per IEC268-15) Power supply voltage: P48, P24, P12 phantom 9V battery Weight without battery:  371g Weight with battery:  680g

MC10M is a multi capsule microphone set including a cardioid electret condenser microphone
(MC10) with the replaceable super cardioid capsule, shock mount adaptor, and wind screen.
MC10M can be used in wide applications, from studio & home recording to field sound aquisition.

FEATURES:
Replaceable 2 types of polar pattern capsule, cardioid/super cardioid as standard
Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adaptors, stereo mounting blacket & wind screen as standard
Dedicated carrying case as standard

SPECIFICATIONS:
Type :Back Electret
Condenser Microphone
Polar Pattern :Cardioid/Super Cardioid
Frequency Response :40Hz to 20kHz +/-10dB
Sensitivity :-40dBV/pa (10mv/pa)
Rated Impedance :200W
Equivalent Noise Level
:22dB (A weighted IEC/DIN 651)
Maximum S.P.L. :134dB (THD£0.5%, 1kHz)
Dynamic Range :112dB
Power Supply :48V Phantom Power
(IEC 268-15/DIN45596)
Current Consumption :3.5mA
Dimensions :?20mm x 150mm
Net Weight :130g (MC10 x 1)
Full Package Weight :865g

The e 945 is a fully professional super-cardioid vocal microphone which cuts through the mix and offers a smooth, natural sound. Its warm tonal response is matched with rugged construction and excellent feedback rejection. Features Rugged metal body Advanced shock-mount design Consistent on-/off-axis response Hum compensating coil Made in Germany Delivery includes a pouch and a microphone clamp Delivery Includes 1 e 945 MZQ 800 microphone clamp Pouch Technical Data Pick-up pattern  Super-cardioid Frequency response (microphone)  40.....18000Hz Sensitivity in free field, no load (1kHz) 2,0mV/Pa bei 1 kHz = -54dB (0 dB = 1V/Pa) = -74 dB (0 dB = 1V/ubar) Nominal impedance  350 Ohm Min. terminating impedance  1000 Ohm Dimensions  47 x 186 mm Weight  330 g
Weight0.30 kg0.15 kg0.50 kg2.00 kg0.86 kg0.33 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.15 kg
Weight 0.50 kg
Weight 2.00 kg
Weight 0.86 kg
Weight 0.33 kg