| Content |
The AT2031 is the ideal microphone for stringed instruments in critical studio and live applications. Its permanently polarized element offers extended frequency response with a slight rise in the high frequency range for a more detailed sound. Its low self-noise and high SPL handling capability offer a wide dynamic range, perfectly suited for the most demanding applications.
- Outstanding performance and rugged construction
- High SPL handling and wide dynamic range
- Smooth, extended frequency response with a slight rise in the high-frequency region
- Switchable 150 Hz 6dB/oct hi-pass fi lter
- Cardioid polar pattern improves isolation of desired sound source
- Low self-noise perfectly suited for digital recording equipment
- Ideal for stringed instruments such as violin, cello, acoustic guitar, harp and piano.
- Element: Fixed-charge back plate permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll-Off: 150 Hz, 6 dB/octave
- Open Circuit Sensitivity: – 34 dB (19.9 mV) re 1V at 1 Pa*
- Impedance: 85 ohms
- Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.
- Noise: 17 dB SPL
- Dynamic Range: (typical) 124 dB, 1 kHz at max SPL
- Signal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa*
- Phantom Power Requirements: 48V DC, 2mA typical
- Switches: Flat, roll-off
- Weight: (less accessories) 134 g
- Dimensions: 143.0 mm long, 21.0 mm maximum body Ø
- Output Connector: Integral 3-pin XLRM-type
- Accessories Furnished: AT8405a stand clamp; windscreen; soft protective pouch
*1 pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
|
The e 865 is a fully professional super-cardioid vocal microphone utilising the very best in condenser microphone technology to achieve new standards of quality and sound. The microphone capsule insorporates special blast/pop protiction plate to shield the diaphragm from excessive sound pressure levels. ON/OFF Switch.
- Pick-up pattern : super cardioid
- Sensitivity in free field, no load : (1kHz) 3 mV/Pa
- Max. Sound pressure level (aktiv) : 150 dB
- Nominal impedance : 200 Ohm
- Min. terminating impedance : 1000 Ohm
- Dimensions : d 47 x 193 mm
- Weight : w/o cable 311 g
- Frequency response (microphone) : 40.....20000 Hz
- Phantom powering : 12 - 48 V
| The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-
condenser microphone design.Intended for recording acoustic instruments,
drum overheads, cymbals and live performances, the compact externally
polarized mic employs a .5? capsule, an active J-FET impedance converter
with bipolar output buffer.
Finished in durable satin nickel, the NT5 is intended for either single or stereo
X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case
with windshields and mounts.
SPECIFICATIONS:
Acoustic principle: Externally polarised single diaphragm
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651: 78dB
Equvalent noise: Maximum spl: 143 dB @ 1% THD into 1k_
Sensitivity:
-38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL
Power supply voltage: P48 Supply (38V?52V), P24 Supply (20V-26V)
Current consumption: 4 mA, 2 mA,
Weight: 100g |
Technical specifications | Polar pattern | | hypercardioid | | Frequency range | | 50 to 20,000 Hz | | Sensitivity | | 20 mV/Pa (?34 dBV) | | Max. SPL | | 125 dB (k=1 %) | | Equivalent noise level | | 21 dB-A | | Signal/noise ratio (A-weighted) | | 73 dB | | Impedance | | 600 ohms | | Recommended load impedance | | >2000 ohms | | Supply voltage | | 9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules) | | Current consumption | | | | Connector | | Discreet Acoustics Modular standard | | Finish | | matte dark gray | | Dimensions | | 13.5 x 20 mm dia. (0.5 dia. x 0.8 in.) | | Net weight | | 5 g (0.17 oz.) | | Shipping weight | | 88 g (3.1 oz.) | | Accessories (included) | | W 30 |
|
Cardioid Condenser with 10dB Attenuator and 3 Position Low-Cut Filter
One of the world's great studio microphones, the SM81 provides precise, detailed sound reproduction, is excellent for studio recording, and is rugged enough for live sound reinforcement.
- A standard for acoustic instruments, including guitar and cymbals
- Selectable, low-frequency response -- either flat, 6dB/octave roll-off, or 18 dB/octave roll-off
- Built-in, switchable 10 dB attenuator for use in high SPL situations
- Phantom power only
- Windscreen included
- Low noise and high output clipping
- Cardioid condenser
- Frequency response: 20 to 20,000 Hz
| Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 |
Reviews
There are no reviews yet.