AUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE

175.00 incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20-20,000 Hz Low Frequency Roll Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa Impedance: 120 ohms Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB […]

 

Read more

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
  • Impedance: 120 ohms
  • Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
  • Dynamic Range: 136 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 3.8 mA typical
  • Weight: 403 g (14.2 oz)
  • Dimensions: 170.0 mm (6.69“) long, 52.0 mm (2.05“) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8458 shock mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE removeRODE K2 VARIABLE PATTERN CONDENSER VALVE MICROPHONE removeAKG C 3000B Condenser cardioid microphone removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone removeRODE NTK TUBE CONDENSER STUDIO MICROPHONE remove
NameAUDIO TECHNICA AT2035 CONDENSER CARDIOID MICROPHONE removeRODE K2 VARIABLE PATTERN CONDENSER VALVE MICROPHONE removeAKG C 3000B Condenser cardioid microphone removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone removeRODE NTK TUBE CONDENSER STUDIO MICROPHONE remove
Image
SKUAT2035H11RD00006C 3000BH11RD00025E005253H11RD00012
Rating
Price 175.00 incl. GR VAT 749.00 incl. GR VAT 209.99 incl. GR VAT 188.00 incl. GR VAT 80.00 incl. GR VAT 599.00 incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

In stock

In stock (can be backordered)

Available on backorder

In stock (can be backordered)

In stock

AvailabilityOnly 2 left in stock (can be backordered)In stockIn stock (can be backordered)Available on backorderIn stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
  • Impedance: 120 ohms
  • Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
  • Dynamic Range: 136 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 3.8 mA typical
  • Weight: 403 g (14.2 oz)
  • Dimensions: 170.0 mm (6.69“) long, 52.0 mm (2.05“) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8458 shock mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch

K2 - ?It cant be done?? Precision Variable Pattern Dual 1? Condenser Valve Microphone.
 
The R?DE K2 is the result of designing and building 1000?s of valve microphones. The
K2?s HF-1 capsule is the pinnacle of transducer technology. The sound quality combines
modern high-end specifications with the character and subtleties of the legendary 50?s mics.
Infinitely variable control of the K2?s polar patterns provides the freedom and flexibility to
excel in any recording situation. The K2 is another example of R?DE?s commitment to
building quality studio microphones to meet the exacting standards demanded by today?s
professionals.At the 2004 Frankfurt Music Messa, 56 of the most prestgious music industry
magazines voted the K2 the ?Best Studio Microphone of 2004?.

SPECIFICATIONS:
Features:
? New large capsule with gold sputtered diaphragm. ? Ultra low noise.
? Wide dynamic range. ? Class ?A? valve circuitry. ? Hand-selected and
graded 6922 twin-triode valve. ? Dedicated Power Supply. ? High strength
welded and heat-treated steel mesh head. ? Durable satin nickel finish.
? Internal capsule shock mounting. ? High level of RF rejection. ? Supplied
complete with SM2 Shock Mount and RC2 Custom Carry Case.
? Continuously variable polar patterns. From omni, through cardiod to
figure 8, controlled at the power supply.
Operation power:
The K2 is designed to operate from a dedicated power supply (110 - 120 V/220 - 240 V, 50/60 Hz)
Acoustic principle: Externally polarized 25 mm(1?) condenser.
Directional pattern:
Continuously variable multi pattern -Omni, through Cardioid to figure 8.
Frequency range:  20 Hz - 20 kHz
Output impedance:
Valve impedence converter with bipolar output buffer.
Signal noise ratio din iec 651:
 > 81 dB (1kHz relative to 1 Pa; per IEC651,IEC268-15).
Equvalent noise:  10 dBA SPL (per IEC651, IEC268-15).
Maximum spl: 162 dB (@ 1% THD into 1k).
Sensitivity:
 -36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB.
Power supply voltage:
Dedicated Power Supply(110 - 120 V/220 - 240 V, 50/60 Hz).
Weight:  815 gms
Dimensions width:  208.5 mm
Dimensions depth:  55 mm
Dimensions height:  55 mm
Maximum output voltage:  > +30 dBu (@ 1% THD into 1 k).

 
  • Polar pattern: Cardioid
  • Switchable -10dB PAD
  • Frequency response: 20 - 20,000 Hz
  • Max. SPL: 140/150 dB (THD = 0.5%)
  • Electrical impedance: 200 Ohm
  • Requires phantom power
  • Diameter: 53 mm
  • Length: 162 mm
  • Net weight: 320 g
  • Colour: Black
  • Incl. shock mount
  • Highly affordable AKG large-diaphragm microphone technology
  • Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost. Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem. An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3) 25 dB
Equivalent noise level 14 dB-A
Signal/noise ratio (A-weighted) 80 dB
Preattenuation pad 10 dB, switchable
Bass filter 6 dB/octave below 500 Hz
Impedance 200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
Connector 3-pin XLR
Finish silver gray
Net weight 320 g / 11.3 oz.
Shipping weight 950 g / 2.1 lbs.
Patent(s) Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
  • Large 1" (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g Frequency Curve Image:
Behringer C-3 Dual-Diaphragm Studio Condenser Microphone Introducing the Professional Condenser Microphone C-3 from BEHRINGER Our latest dual-diaphragm condenser microphone C-3 is ideal for high-quality studio recording and live applications. The selectable omnidirectional, cardioid, and figure-eight pickup patterns offer ultimate versatility needed to professionally record vocals and acoustic instruments. The C-3 holds a pressure-gradient transducer with a shock-mounted dual-diaphragm capsule. Its ultra-high sound resolution and flat frequency response rival those of microphones with much higher price tags. It also includes an LED that indicates phantom power operation and a gold-plated XLR output connector to ensure highest signal integrity. The C-3 comes with extensive accessories such as swivel stand and transport case. The C-3 represents state-of-the-art technology at a price that is simply unheard of.

Rode's new NTK has the quality and warmth demanded from a tube mic.
With the large 1 in. capsule gold-plated membrane and twin triode tubes
(hand graded and selected), Rode is again setting the standard for value.
This is a tube mic designed exclusively for recording professionals who
want what only the best can offer.

Features:
Dynamic range of 47dB
Ultra low noise of only 12dB
Internal capsule shock mounting
Cardioid polar pattern
20Hz - 20kHz frequency response
Includes a power supply, 30 ft. cable, and stand adapter

Technical Description:
Capsule: Externally polarised 1 in. pressure-gradient condenser
Active Electronics: Unity-gain closed-loop impedance converter;
vacuum-tube input with bipolar buffering
Pickup Pattern: Cardioid
Frequency Response: 20Hz - 20kHz (+/-6dB)
Output Impedance: 200 ohms (100 ohms per leg)
Sensitivity: -38dB re 1V/Pa (12mV @ 94dB SPL) +/-1dB
Equivalent Noise: 12dB SPL (A-weighted per IEC268-15) +/-2dB
Maximum Output: > +29dBu (@ 1kHz, 5% THD into 1k (load)
Dynamic Range: > 147dB (A-weighted, per IEC268-15)
Maximum SPL: > 158dB SPL (@ 1kHz, 5% THD into 1k (load)
Signal/Noise Ratio: > 82dB (A-weighted, per IEC268-15)
External power supply: 100-120V/200-240V AC (user selectable)
50Hz/60Hz, 25VA maximum
Packed Weight: 4.53 kg (Mic only 760 gm)

Accessories included:
Power Supply
30 ft (10 m) Multicore Cable
M2 Standmount plus 3/8-5/8 in. Thread Adapter
Optional Extras: SM2 Shockmount

Weight0.50 kg2.00 kg1.00 kg3.00 kg0.45 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 2.00 kg
Weight 1.00 kg
Weight 3.00 kg
Weight 0.45 kg
Weight 2.00 kg