| Content |
With its lightweight yet feature-rich design, the AT8024 Stereo/Mono Camera-Mount Microphone offers a simple, powerful solution for capturing high-resolution audio for video. Selectable line-cardioid mono and internally matrixed mid-side stereo modes provide the flexibility to focus the recording on a single sound source or to widen the field for outstanding sonic realism. In either mode, the AT8024 delivers audio that is dramatically better than that supplied by the camera’s internal microphone.
The AT8024 camera-mount microphone also comes equipped with a three-position adjustable attenuator (-20 dB, -10 dB, 0 dB) to capture even soft and very loud sound passages without distortion. A switchable low-frequency roll-off reduces pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations. The microphone is powered by a single AA battery for optimal performance with high max SPL, and features an integral camera shoe mount that attaches quickly to DSLRs and shoe-equipped camcorders.
- Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone
- Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
- Handles loud sound sources without distortion
- Three-position adjustable attenuator and switchable low-frequency roll-off
- Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
- Compact, lightweight design with integral shoe mount
- Red/green LED power indicator
- Includes windscreen, fuzzy windscreen and AA battery
| ELEMENTS |
Fixed-charge back plate,
permanently polarized condenser |
| POLAR PATTERNS |
Line-cardioid, LR stereo |
| FREQUENCY RESPONSE |
40-15,000 Hz |
| LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY |
–37 dB (14.1 mV) re 1V at 1 Pa (Mono & LR Stereo) |
| IMPEDANCE |
50 ohms |
| MAXIMUM INPUT SOUND LEVEL |
128 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) |
Mono: 106 dB, 1 kHz at Max SPL;
Stereo: 104 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO |
Mono: 72 dB, 1 kHz at 1 Pa;
Stereo: 70 dB, 1 kHz at 1 Pa |
| BATTERY TYPE |
Type: One 1.5V AA (included);
Life: 80 hours, typical |
| SWITCHES |
Mono, M-S Stereo;
Three-position attenuator;
Flat, roll-off |
| WEIGHT |
114 g (4.0 oz) |
| DIMENSIONS |
172.0 mm (6.77“) long,
24.0 mm (0.94“) maximum body diameter |
| OUTPUT CONNECTOR |
3.5 mm stereo mini-plug on cable |
| CABLE |
Permanently attached 0.2 m -1 m (7.8“- 39.3“) coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end |
| ACCESSORIES FURNISHED |
Windscreen; fuzzy windscreen; AA battery |
| AUDIO-TECHNICA CASE STYLE |
CM1 |
|
Broadcaster - ?The Master of the Airwaves?
Like its name suggests this R?DE microphone was specifically designed ?ON-AIR?
applications where wide frequency response and low distortion are demanded.
Winner of the Radio World/US National Association of Broadcasters (NAB) ?What?s
Cool? award in 1998, the Broadcaster has become an industry standard when studio
sound quality is required for on air applications.
Utilizing an Australian designed and manufactured R?DE 1? externally biased condenser
transducers, the Broadcaster features a switch-able high pass filter to remove low frequency
rumble. A unique ?ON-AIR? LED indicator can be switched ?on? or ?off? by shorting contacts
on the 5 pin audio connector. This feature allows console operators to warn the ?Talent?
that the mic is live.
SPECIFICATIONS:
Features:
True condenser transducer On-Air indicator L.E.D. Ultra low noise
Cardioid polar pattern with high 180 rejection Voice tailored Low Cut
Filter Internal Pop Filter Rugged stainless steel body
Acoustic principle: Externally polarised 25mm (1?) condenser
Directional pattern: Cardioid
Frequency range: 20 Hz ~ 20 kHz
Output impedance: 40Ω
Signal noise ratio din iec 651:
>80 dB (1kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 114 dB (per IEC651, IEC268-15)
Power supply voltage: P48, P24 phantom
Weight without battery: 577g
Weight with battery: 1.3kg
Dimensions width: 167mm
Dimensions depth: 50mm
Dimensions height: 50mm
Maximum output voltage: +2 dBu (@ 1% THD into 1kΩ)
|
The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically
designed for professional applications within the film, video, television, voice-over and
ENG industries.
The NTG-1 provides an electronically balanced output stage and operates on 48 V to
the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response
coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it
ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.
The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively
suppresses wind noise when recording outdoors in moderate conditions. Optional accessories
are available for more demanding applications.
SPECIFICATIONS:
Features:
Broadcast sound quality. Low noise circuitry. Condenser transducer. Rugged metal construction.
Low weight: 105 grams approx. . Low handling noise. Supplied with stand mount, zip pouch and
windshield. Designed & manufactured in Australia. Full 2 year guarantee.
Operation power:
The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will
operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the
output XLR connector.
Operation output impedance:
The NTG-1 will operate satisfactorily into a load impedance as low as 1 k§?. If a load below
this is used, the output signal level will be reduced. The NTG-1??s output is balanced between
pin 2 (hot), pin 3 (cold) and pin 1 is ground.
Acoustic principle: Line plus Gradient.
Directional pattern: Super-Cardioid.
Frequency range:
20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance: 50 ?
Signal noise ratio din iec 651:
76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 18 dB SPL (per IEC651, IEC268-15)
Maximum spl: 139 dB (@ 1% THD into 1 k?)
Sensitivity:
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 121 dB (per IEC651, IEC268-15)
Power supply voltage: P48 Phantom, 44 V to 52 V
Current consumption: 3.5 mA
Output connection:
3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight with battery: 105 g approx.
Dimensions width: 217mm
Dimensions depth: 22mm
Dimensions height: 22mm
| The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.
The integrated shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. (note that cameras with proprietary sized mounts require an additional adaptor.)
Its super cardioid polar pattern is highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.
The RØDE VideoMic directional on-camera microphone is covered by RØDE Microphones' industry leading 10 year warranty.
| Frequency response |
40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave |
| Sensitivity |
-38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Ιmpedance |
200Ω |
| Τotal harmonic distortion |
134dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Dimensions |
250mm x 65mmx 102mm |
| Weight |
176gm |
|
he PRO24-CMF camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with a windjammer, accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact and realism of a live sound field. The microphone is designed for either battery operation or battery-free operation when used with camcorders that provide plug-in power at the mic input. Like all Audio-Technica mics, the PRO24-CM is rugged; it's built to endure the rigors of field production. - Stereo microphone designed to attach to a camcorder
- For camcorders with an accessory shoe and stereo microphone input
- Lightweight, portable design with rugged all-metal construction
- Pair of cardioid condenser elements provides spatial impact and high-fidelity stereo sound image
- Battery-free operation when used with recording devices that provide plug-in power at the mic input
- On/off switch for convenient operation
- Includes camera-mount, windscreen, windjammer, battery and protective pouch
- Permanently attached 6""-12“" coiled cable with right-angle molded 3.5 mm stereo mini plug at output end
Polar Pattern: X/Y Stereo
Frequency Response: 100-17,000 Hz
Open Circuit Sensitivity: -50 dB (3.1 mV) re 1V at 1 Pa
Impedance: 600 ohms
Maximum Input Sound Level: 119 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 82 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 57 dB, 1 kHz at 1 Pa
Battery Type: 1.5V LR44
Battery Current Life: 0.6 mA / 200 hours typical
Switch: On/off
Weight: 3.9 oz (111 g)
Dimensions: 4.59“" (116.5 mm) long, 0.83" (21.0 mm) maximum body diameter
Output Connector: 3.5 mm stereo mini plug on cable
Cable: Permanently attached 152.4 mm - 304.8 mm (6""-12"") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
Accessories: Video-camera shoe mount; LR44 battery; windscreen; Fur windjammer AT8123 and soft protective pouch
| OLED display (on receiver)
One button pairing
Three level gain control
AA battery or USB powered
Includes RØDE\'s broadcast Lavalier microphone
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDEʼs omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.
RØDELink Filmmaker Kit Specifications
Transmission type 2.4GHz Fixed Frequency Agile System
System dynamic range 112dB
Range (distance) 100m
Frequency range 35Hz - 22kHz
Maximum output level 1v Rms (2.8v P-p)
Max input signal level 1v Rms (2.8v P-p)
Max latency 4ms
Receiver (RX-CAM)
Power source 2 X AA Battery Or MicroUSB
Antenna Internal
Output connection 3.5mm TRS Locking Jack Socket - Dual Mono
Output impedance 300Ω
Dimensions 111mm X 65mm X 52mm
Weight 190gm
Transmitter (TX-BELT)
Power source 2 X AA Battery Or MicroUSB
Antenna Internal
Output connection 3.5mm TRS Locking Jack Socket
Output impedance 10kΩ
Dimensions 111mm X 65mm X 40mm
Weight 190gm
Lavalier
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.10“
Address Type End
Frequency Range 60Hz - 18kHz
Output Impedance 3000Ω
Maximum SPL 110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 189.0dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 25dB-A
Weight 1.00gm
Dimensions 12.00mmH x 4.50mmW x 4.50mmD
Warranty 10 year warranty |
Reviews
There are no reviews yet.