Content |
With its lightweight yet feature-rich design, the AT8024 Stereo/Mono Camera-Mount Microphone offers a simple, powerful solution for capturing high-resolution audio for video. Selectable line-cardioid mono and internally matrixed mid-side stereo modes provide the flexibility to focus the recording on a single sound source or to widen the field for outstanding sonic realism. In either mode, the AT8024 delivers audio that is dramatically better than that supplied by the camera’s internal microphone. The AT8024 camera-mount microphone also comes equipped with a three-position adjustable attenuator (-20 dB, -10 dB, 0 dB) to capture even soft and very loud sound passages without distortion. A switchable low-frequency roll-off reduces pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations. The microphone is powered by a single AA battery for optimal performance with high max SPL, and features an integral camera shoe mount that attaches quickly to DSLRs and shoe-equipped camcorders.
- Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone
- Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
- Handles loud sound sources without distortion
- Three-position adjustable attenuator and switchable low-frequency roll-off
- Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
- Compact, lightweight design with integral shoe mount
- Red/green LED power indicator
- Includes windscreen, fuzzy windscreen and AA battery
ELEMENTS |
Fixed-charge back plate, permanently polarized condenser |
POLAR PATTERNS |
Line-cardioid, LR stereo |
FREQUENCY RESPONSE |
40-15,000 Hz |
LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
OPEN CIRCUIT SENSITIVITY |
–37 dB (14.1 mV) re 1V at 1 Pa (Mono & LR Stereo) |
IMPEDANCE |
50 ohms |
MAXIMUM INPUT SOUND LEVEL |
128 dB SPL, 1 kHz at 1% T.H.D. |
DYNAMIC RANGE (typical) |
Mono: 106 dB, 1 kHz at Max SPL; Stereo: 104 dB, 1 kHz at Max SPL |
SIGNAL-TO-NOISE RATIO |
Mono: 72 dB, 1 kHz at 1 Pa; Stereo: 70 dB, 1 kHz at 1 Pa |
BATTERY TYPE |
Type: One 1.5V AA (included); Life: 80 hours, typical |
SWITCHES |
Mono, M-S Stereo; Three-position attenuator; Flat, roll-off |
WEIGHT |
114 g (4.0 oz) |
DIMENSIONS |
172.0 mm (6.77“) long, 24.0 mm (0.94“) maximum body diameter |
OUTPUT CONNECTOR |
3.5 mm stereo mini-plug on cable |
CABLE |
Permanently attached 0.2 m -1 m (7.8“- 39.3“) coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end |
ACCESSORIES FURNISHED |
Windscreen; fuzzy windscreen; AA battery |
AUDIO-TECHNICA CASE STYLE |
CM1 |
|
Audio-Technica's AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.
Designed for video production and broadcast (ENG/EFP) audio acquisition
Short length (11“) ensures mic stays out of the shot -- even when used with compact digital cameras
Smooth, natural-sounding on-axis audio quality
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 129 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 112 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off (recessed)
Weight: 5.1 oz (145 g)
Dimensions: 10.98" (279.0 mm) long, 0.83" (21.0 mm) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; AT8134 windscreen; battery; 5/8“-27 to 3/8“-16 threaded adapter; protective carrying case
|
The length (14.53“) of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.
Designed for video production and broadcast (ENG/EFP) audio acquisition
Length is well-suited for ENG, outdoor recording and other specialized uses
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 40-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: 39 dB (11.2 mV) re 1V at 1 Pa
Impedance: Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off
Weight: 170 g (6.0 oz)
Dimensions: 369.0 mm (14.53“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
| OLED display (on receiver)
One button pairing
Three level gain control
AA battery or USB powered
Includes RØDE\'s broadcast Lavalier microphone
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDEʼs omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.
RØDELink Filmmaker Kit Specifications
Transmission type 2.4GHz Fixed Frequency Agile System
System dynamic range 112dB
Range (distance) 100m
Frequency range 35Hz - 22kHz
Maximum output level 1v Rms (2.8v P-p)
Max input signal level 1v Rms (2.8v P-p)
Max latency 4ms
Receiver (RX-CAM)
Power source 2 X AA Battery Or MicroUSB
Antenna Internal
Output connection 3.5mm TRS Locking Jack Socket - Dual Mono
Output impedance 300Ω
Dimensions 111mm X 65mm X 52mm
Weight 190gm
Transmitter (TX-BELT)
Power source 2 X AA Battery Or MicroUSB
Antenna Internal
Output connection 3.5mm TRS Locking Jack Socket
Output impedance 10kΩ
Dimensions 111mm X 65mm X 40mm
Weight 190gm
Lavalier
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.10“
Address Type End
Frequency Range 60Hz - 18kHz
Output Impedance 3000Ω
Maximum SPL 110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 189.0dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 25dB-A
Weight 1.00gm
Dimensions 12.00mmH x 4.50mmW x 4.50mmD
Warranty 10 year warranty | The R?DE VideoMic is a professional grade shotgun microphone. Based on the
latest ?Film industry? technology, the VideoMic is designed specifically for use with
high quality Digital Video Cameras.
The microphone exhibits low noise and an unusually wide bandwidth for its size. It
is ultra lightweight, yet rugged due to it?s ABS construction. The VideoMic is powered
by a standard 9 V battery and offers a Low Battery LED status indicator and a
switchable high pass filter to reduce unwanted low frequency rumble.
The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting
and utilizes a stereo mini jack for audio output.
SPECIFICATIONS:
Features:
Studio recording quality. Rugged fibre-reinforced ABS construction. 9 V battery operation.
Custom designed integral wind shield. Condenser Microphone. Low noise circuitry. Low
handling noise. Integral camera-shoe mount. Designed & manufactured in Australia.
Full 2 year guarantee.
Operation power:
The VideoMic is designed to operate from a 9 V battery (ANSI:1604A or IEC:6LR61).
The battery is conveniently located within the support arm of the microphone. A fully
removable access cover and a 1-way insertion mechanism ensure ease of loading.
The battery will provide more than 100 hrs. of continuous use due to a low consumption
of only 5.0 mA.
Operation output impedance:
The microphone will operate satisfactorily into a load impedance as low as 1 k?.
If a load below this is used, the output signal level will be reduced.
Acoustic principle: Line plus Gradient
Directional pattern: Super-Cardioid
Frequency range:
40 Hz ~ 20 000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
74 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 20 dB SPL (per IEC651, IEC268-15)
Maximum spl: 134 dB (@ 1% THD into 1 kΩ)
Sensitivity:
-38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 114 dB (per IEC651, IEC268-15)
Power supply voltage:
9 V DC Alkaline Battery (ANSI:1604A or IEC:6LR61)
Current consumption: 5 mA
Battery life: >100 hours
Output connection: Stereo mini jack plug - ?3.5 mm.
Weight: 176 grm.
Dimensions width: 250mm
Dimensions depth: 65mm
Dimensions height: 102mm |
The MD 46 is a high-quality reporter's microphone with cardioid pick-up pattern. It has been specially optimised for rough use in live reporting and broadcasting environments. The MD 46 is a very 'good-natured' microphone whose design avoids wind and handling noise problems. Colour: black, sound inlet basket: refined steel, black.
Features - Two-ply sound inlet basket provides increased protection from wind and pop noise
- Rugged metal housing
- Rubber mounted capsule ensures low sensitivity to handling noise
- Cardioid pick up pattern ensures excellent speech intelligibility even with high ambient noise levels
Type: | Dynamic, Reporting | Pick Up Pattern: | omni-directional | Frequency response: | 40 - 18 000 Hz | Sensitivity: | 2,0 mV/Pa | Ιmpedance: | 350 Ohm | Dimensions: | Ø 49 x 250 mm | Weight: | 360 gr | Use: | Video/Broadcast |
|
Reviews
There are no reviews yet.