Audio Technica AT803 Miniature omnidirectional condenser microphone

186.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: AT803 Category:
The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use, it features an integral 80 Hz high-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The microphone operates on battery or phantom power. High intelligibility for lecturers and […]

 

Read more

The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use, it features an integral 80 Hz high-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The microphone operates on battery or phantom power.

  • High intelligibility for lecturers and stage/TV performers
  • Provides excellent yet unobtrusive sound pickup
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Operates on battery or phantom power
  • 6′ (1.8 m) cable permanently attached to mic, TA3F connector at power module
  • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

 

  • Element Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern Omnidirectional
  • Frequency Response 30-20,000 Hz
  • Low Frequency Roll-Off 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
  • Impedance Phantom: 200 ohms Battery: 270 ohms
  • Maximum Input Sound Level Phantom: 135 dB SPL, 1 kHz at 1% T.H.D. Battery: 121 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (Typical) Phantom: 107 dB, 1 kHz at Max SPL Battery: 93 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio 66 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements 11-52V DC, 2 mA typical
  • Battery Type 1.5V AA/UM3
  • Battery Current / Life 0.4 mA / 1200 hours typical (alkaline)
  • Switch Off, on-flat, on-roll-off
  • Weight (Microphone) 2.8 g (0.1 oz)
  • Weight (Power Module) 139 g (4.9 oz)
  • Dimensions (Microphone) 25.0 mm (0.98“) long, 10.2 mm (0.40“) diameter
  • Dimensions (Power Module) 84.0 mm (3.31“) H x 63.0 mm (2.48“) W x 22.0 mm (0.87“) D
  • Output Connector (Power Module) Integral 3-pin XLRM-type
  • Cable 1.8 m (6′) long (permanently attached to microphone), 2.6 mm (0.10“) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories Furnished AT8531 power module; AT8419 clothing clip; AT8116 windscreen; battery; protective carrying case
  • Audio-Technica Case Style M1

 

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica AT803 Miniature omnidirectional condenser microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica AT803 Miniature omnidirectional condenser microphone removeAKG C 417L professional miniature condenser microphone removeRODE Lavalier Microphone removeShure WL51B & WL51W Lavalier Condenser Microphone removeAKG C417PP professional miniature condenser microphone removeShure MX185 Lavalier Condenser Microphone remove
NameAudio Technica AT803 Miniature omnidirectional condenser microphone removeAKG C 417L professional miniature condenser microphone removeRODE Lavalier Microphone removeShure WL51B & WL51W Lavalier Condenser Microphone removeAKG C417PP professional miniature condenser microphone removeShure MX185 Lavalier Condenser Microphone remove
Image
SKUAT803C 417LH11RD00028WL51B & WL51WC417PPMX185
Rating
Price 186.00 incl. GR VAT 123.00 incl. GR VAT 204.00 incl. GR VAT 291.00 incl. GR VAT148.80 incl. GR VAT 265.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use, it features an integral 80 Hz high-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The microphone operates on battery or phantom power.

  • High intelligibility for lecturers and stage/TV performers
  • Provides excellent yet unobtrusive sound pickup
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Operates on battery or phantom power
  • 6' (1.8 m) cable permanently attached to mic, TA3F connector at power module
  • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

 

  • Element Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern Omnidirectional
  • Frequency Response 30-20,000 Hz
  • Low Frequency Roll-Off 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
  • Impedance Phantom: 200 ohms Battery: 270 ohms
  • Maximum Input Sound Level Phantom: 135 dB SPL, 1 kHz at 1% T.H.D. Battery: 121 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (Typical) Phantom: 107 dB, 1 kHz at Max SPL Battery: 93 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio 66 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements 11-52V DC, 2 mA typical
  • Battery Type 1.5V AA/UM3
  • Battery Current / Life 0.4 mA / 1200 hours typical (alkaline)
  • Switch Off, on-flat, on-roll-off
  • Weight (Microphone) 2.8 g (0.1 oz)
  • Weight (Power Module) 139 g (4.9 oz)
  • Dimensions (Microphone) 25.0 mm (0.98“) long, 10.2 mm (0.40“) diameter
  • Dimensions (Power Module) 84.0 mm (3.31“) H x 63.0 mm (2.48“) W x 22.0 mm (0.87“) D
  • Output Connector (Power Module) Integral 3-pin XLRM-type
  • Cable 1.8 m (6') long (permanently attached to microphone), 2.6 mm (0.10“) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories Furnished AT8531 power module; AT8419 clothing clip; AT8116 windscreen; battery; protective carrying case
  • Audio-Technica Case Style M1

 

Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, tiepin, and windscreen are supplied with each C 417.

Type  Condenser - Omni
Frequency Ressponse    60Hz - 18kHz
Sensitivity    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
 Resistance   3000Ω
Dimensions   4.50mmW x 12.00mmH x 4.50mmD
Weight   1.00gm
Accessories    Αntitrauma case,WS-LAV, Minifur LAV, Micon cable, Spanner






    All models include foam windscreen, swiveling lapel clip, dual tie clip, pin mount, magnet mount
    Subminiature size (5.8 mm diameter x 11 mm height)
    Electret condenser cartridge
    Unidirectional pattern
    One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
    High Boost equalization caps included for optimal clarity and response
        Provides a 10 dB boost centered at 12 kHz

    Used in applications that require a chest-worn microphone

Black and white models available
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens and carry case
requency response: 20-20,000 Hz
Low visibility with a variety of options for mounting
Low handling noise
Legendary Shure quality, ruggedness, and reliability



  • Extremely light, inconspicuous lavalier microphone
  • Excellent audio quality across the full bandwith
Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, tiepin, and windscreen are supplied with each C 417.
C 417 PP: For hardwire applications, with standard XLR connector for phantom powering.

Condenser
    Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Microflex® Lavalier microphones bring a new level of sophistication to personal voice reproduction. Like all Microflex family microphones, the Lavaliers use Shure's interchangeable condenser cartridges, available in cardioid, supercardioid or omnidirectional polar patterns. That means you can be sure there is a Microflex Lavalier that's right for your application.  Compatible with all Shure wireless bodypack transmitters, their high sensitivity and wide frequency response guarantee great sound.

MX185     Cardioid, Includes Belt-Clip Preamp, Rotatable Tie Clip, Dual Tie Clip, Snap-Fit Windscreen
Weight0.10 kg0.30 kg0.20 kg0.20 kg0.07 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.30 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.07 kg
Weight 0.20 kg