| Content |
This 0.6 mil conical cartridge fits P-mount turntables.
| Frequency Response |
20-20,000 Hz |
| Channel Separation |
18 (dB at 1 kHz) |
| Vertical Tracking Force |
1.0-1.5 g (1.25 g standard) |
| Stylus Construction |
Bonded round shank |
| Recommended Load Impedance |
47,000 ohms |
| Output |
3.5 mV (1 kHz, 5 cm/sec.) |
| Channel Balance |
2.5 dB (1 kHz) |
| Stylus Shape |
0.6 mil conical |
| Cantilever |
Carbon fiber-reinforced ABS |
| Mount |
P-mount |
| Replacement Stylus |
ATN81CP |
Coil impedance: 2.8 k ohms (1 kHz)
DC resistance: 410 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 400 mH (1 kHz)
Vertical tracking angle: 20°
Dimensions: 15.3 mm (0.60“) H × 10.0 mm (0.39“) W × 35.1 mm (1.38“) D
Weight: 6.0 g (0.21 oz) |
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
|
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
|
|
Channel balance at 1kHz
|
1,5 dB
|
|
Channel separation at 1kHz
|
25 dB
|
|
Channel separation at 15 kHz
|
15 dB
|
|
Frequency range at -3dB
|
20-20.000 Hz
|
|
Frequency response
|
20-15.000 Hz 3dB/-2dB
|
|
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
|
|
Compliance, dynamic lateral
|
6 μm/m N
|
|
Stylus type
|
Spherical
|
|
Stylus tip radius
|
R 18 μm
|
|
Tracking force range
|
3,0-5,0 g (30-50 mN)
|
|
Tracking force recommended
|
4,0 g (40 mN)
|
|
Tracking angle
|
20°
|
|
Internal impedance, DC resistance
|
750 Ohm
|
|
Internal inductance
|
450 mH
|
|
Recommended load resistance
|
47 kOhm
|
|
Recommended load capacitance
|
200-600 pF
|
|
Cartridge weight
|
5 g
|
|
Replacement stylus unit
|
scratch
|
|
Ortofon D 25 M Mono Cartridge Spherical Diamond
OM D 25 M Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
Channel balance at 1 kHz
Channel separation at 1 kHz
Channel separation at 15 kHz
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz +3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542:
Tracking ability at 315Hz at recommended tracking force: > 70 µm
Compliance, dynamic, lateral: 7 µm / mN
Stylus type: Spherical
Stylus tip radius: R 25 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 2,0-3,0 g (20-30 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 5 g
Replacement stylus unit: Stylus D 25 M
|
| M44-7
Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide. Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
- Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
- With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
- Skip Resistance: ultra high
- Output: ultra high
- Record Wear: ultra low
- Sound Emphasis: big bass
Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz
Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z
Made In Mexico | The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.
| TECHNICAL DATA |
|
| Output voltage at 1000 Hz, 5cm/sec. |
5,5 mV |
| Channel balance at 1 kHz |
1,5 dB |
| Channel separation at 1 kHz |
25 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at - 3dB |
20-25.000 Hz |
| Frequency response |
20-20.000 + 2 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force |
80 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Nude Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,6-2,0g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
1,3 kOhm |
| Internal inductance |
700 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
150-300 pF |
| Cartridge colour, body/stylus |
Black/Blue |
| Cartridge weight |
7,2 g |
| Replacement stylus unit |
2M Blue |
| The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 24 dB |
| Channel separation at 15 kHz |
>15 dB |
| Frequency range at - 3dB |
20-30.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Nude Fine Line |
| Stylus tip radius |
r/R 8/40 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
|
Reviews
There are no reviews yet.