AUDIO TECHNICA AT81CP P-Mount Turntable cartridge with needle

40.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
This 0.6 mil conical cartridge fits P-mount turntables. Frequency Response 20-20,000 Hz Channel Separation 18 (dB at 1 kHz) Vertical Tracking Force 1.0-1.5 g (1.25 g standard) Stylus Construction Bonded round shank Recommended Load Impedance 47,000 ohms Output 3.5 mV (1 kHz, 5 cm/sec.) Channel Balance 2.5 dB (1 kHz) Stylus Shape 0.6 mil conical […]

 

Read more

This 0.6 mil conical cartridge fits P-mount turntables.

Frequency Response 20-20,000 Hz
Channel Separation 18 (dB at 1 kHz)
Vertical Tracking Force 1.0-1.5 g (1.25 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Output 3.5 mV (1 kHz, 5 cm/sec.)
Channel Balance 2.5 dB (1 kHz)
Stylus Shape 0.6 mil conical
Cantilever Carbon fiber-reinforced ABS
Mount P-mount
Replacement Stylus ATN81CP

Coil impedance: 2.8 k ohms (1 kHz)
DC resistance: 410 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 400 mH (1 kHz)
Vertical tracking angle: 20°
Dimensions: 15.3 mm (0.60“) H × 10.0 mm (0.39“) W × 35.1 mm (1.38“) D
Weight: 6.0 g (0.21 oz)

Weight 0.05 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA AT81CP P-Mount Turntable cartridge with needle”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA AT81CP P-Mount Turntable cartridge with needle removeAUDIO TECHNICA AT33EV Turntable cartridge removeORTOFON CONCORDE S-120 Set Head with needle removeNUMARK CC-1 PROFESSIONAL DJ CARTRIDGE removeORTOFON Concorde Scratch CARTRIDGE removeSHURE M44-7DJ Scratch Spherical turntable head/needle system remove
NameAUDIO TECHNICA AT81CP P-Mount Turntable cartridge with needle removeAUDIO TECHNICA AT33EV Turntable cartridge removeORTOFON CONCORDE S-120 Set Head with needle removeNUMARK CC-1 PROFESSIONAL DJ CARTRIDGE removeORTOFON Concorde Scratch CARTRIDGE removeSHURE M44-7DJ Scratch Spherical turntable head/needle system remove
Image
SKUAT81CPAT33EVConcorde S-120 SetH99NU00007ConcordeScratchM447
Rating
Price40.00 incl. GR VAT635.12 incl. GR VAT160.00 incl. GR VAT 79.00 incl. GR VAT102.00 incl. GR VAT372.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

Only 2 left in stock

AvailabilityIn stockIn stockIn stockIn stockIn stockOnly 2 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

This 0.6 mil conical cartridge fits P-mount turntables.

Frequency Response 20-20,000 Hz
Channel Separation 18 (dB at 1 kHz)
Vertical Tracking Force 1.0-1.5 g (1.25 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Output 3.5 mV (1 kHz, 5 cm/sec.)
Channel Balance 2.5 dB (1 kHz)
Stylus Shape 0.6 mil conical
Cantilever Carbon fiber-reinforced ABS
Mount P-mount
Replacement Stylus ATN81CP

Coil impedance: 2.8 k ohms (1 kHz)
DC resistance: 410 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 400 mH (1 kHz)
Vertical tracking angle: 20°
Dimensions: 15.3 mm (0.60“) H × 10.0 mm (0.39“) W × 35.1 mm (1.38“) D
Weight: 6.0 g (0.21 oz)

Type: MC-type

Playback frequency range: 15-50,000Hz

Output voltage: 0.3mV (1kHz and 3.54cm/sec.)

Channel separation: 30dB (1kHz)

Output balance: 0.5dB (1kHz)

Stylus pressure: 1.8-2.2g (2.0g standard)

Coil impedance: 10O (1kHz)

DC resistance: 10O

Load resistance: More than 100O (when head amp connected)

Coil inductance: 22µH (1kHz)

Static compliance: 40×10-6cm/dyne

Dynamic compliance: 10×10-6cm/dyne (100Hz)

Stylus needle shape: Oval (0.3×0.7mil)

Cantilever: Duralumin tapered pipe

Vertical tracking angle: 23°

Dimensions: H16×W16.6×D26.5mm

Weight: 6.9g

Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1

A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm! The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance. An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level. Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions. In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
Output voltage at 1000Hz, 5cm/sec. 10 mV
Channel balance at 1kHz 1,5 dB
Channel separation at 1kHz 20 dB
Channel separation at 15 kHz 15 dB
Frequency range at -3dB 20-18.000 Hz
Frequency response 20-18.000 Hz +3/- 2dB
FIM distortion at recomm. tracking force DIN 45.542
Tracking ability at 315 Hz at recomm. tracking force 120 μm
Compliance, dynamic lateral 11 μm/m N
Stylus type Spherical
Stylus tip radius R 18 μm
Tracking force range 1,5-10,0 g (15-100 mN)
Tracking force recommended 4,0 g (40 mN)
Internal impedance, DC resistance 1680 Ohm
Internal inductance 920 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge weight 18,5 g
Replacement stylus unit Ortofon-Serato S-120

NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY

    * Frequency response: 20 to 22,000Hz
    * Output: 6mV
    * Channel separation nominal: 28dB
    * DC resistance: 430 ohms/ch
    * Inductance: 400mH/ch
    * Weight: 18.0g
    * Channel balance: within 1.5dB
    * Tracking force: 3–6g
    * Recommended load: 47K ohms 200pf
    * Stylus tip: fine circular diamond
    * Application: high versatility and skip resistance

For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Output voltage at 1000Hz, 5cm/sec.

7 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

25 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-15.000 Hz 3dB/-2dB

Tracking ability at 315 Hz at recommmende tracking force

80 μm

Compliance, dynamic lateral

6 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0-5,0 g (30-50 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

750 Ohm

Internal inductance

450 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

18,5 g

Replacement stylus unit

Scratch

 

M44-7 Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide.  Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
  • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
  • With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
  • Skip Resistance: ultra high
  • Output: ultra high
  • Record Wear: ultra low
  • Sound Emphasis: big bass
  Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z Made In Mexico
Weight0.05 kg0.05 kg0.10 kg0.18 kg0.18 kg0.5 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.05 kg
Weight 0.05 kg
Weight 0.10 kg
Weight 0.18 kg
Weight 0.18 kg
Weight 0.5 kg