| Content |
This 0.6 mil conical cartridge fits P-mount turntables.
| Frequency Response |
20-20,000 Hz |
| Channel Separation |
18 (dB at 1 kHz) |
| Vertical Tracking Force |
1.0-1.5 g (1.25 g standard) |
| Stylus Construction |
Bonded round shank |
| Recommended Load Impedance |
47,000 ohms |
| Output |
3.5 mV (1 kHz, 5 cm/sec.) |
| Channel Balance |
2.5 dB (1 kHz) |
| Stylus Shape |
0.6 mil conical |
| Cantilever |
Carbon fiber-reinforced ABS |
| Mount |
P-mount |
| Replacement Stylus |
ATN81CP |
Coil impedance: 2.8 k ohms (1 kHz)
DC resistance: 410 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 400 mH (1 kHz)
Vertical tracking angle: 20°
Dimensions: 15.3 mm (0.60“) H × 10.0 mm (0.39“) W × 35.1 mm (1.38“) D
Weight: 6.0 g (0.21 oz) |
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
|
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
|
|
Channel balance at 1kHz
|
1,5 dB
|
|
Channel separation at 1kHz
|
25 dB
|
|
Channel separation at 15 kHz
|
15 dB
|
|
Frequency range at -3dB
|
20-20.000 Hz
|
|
Frequency response
|
20-15.000 Hz 3dB/-2dB
|
|
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
|
|
Compliance, dynamic lateral
|
6 μm/m N
|
|
Stylus type
|
Spherical
|
|
Stylus tip radius
|
R 18 μm
|
|
Tracking force range
|
3,0-5,0 g (30-50 mN)
|
|
Tracking force recommended
|
4,0 g (40 mN)
|
|
Tracking angle
|
20°
|
|
Internal impedance, DC resistance
|
750 Ohm
|
|
Internal inductance
|
450 mH
|
|
Recommended load resistance
|
47 kOhm
|
|
Recommended load capacitance
|
200-600 pF
|
|
Cartridge weight
|
5 g
|
|
Replacement stylus unit
|
scratch
|
|
Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.
ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI
Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.
With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.
Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.
TECHNICAL DATA CONCORDE DIGITRACK
Output voltage at 1000 Hz,
5cm/sec.
8 mV
Channel balance at 1 kHz
1,5 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-20.000 Hz
Frequency response
20-18.000 Hz -3 /- 2dB
FIM distortion at recommended tracking force,
DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
80 m
Compliance, dynamic, lateral
12 m/mN
Stylus type
Spherical
Stylus tip radius
R18
Equivalent stylus tip mass
0,6 mg
Tracking force range
2-4 g (20-40 mN)
Tracking force, recommended
3,0 g (30 mN)
Tracking angle
20
Internal impedance, DC resistance
1325 Ohm
Internal inductance
765 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Red/Red
Cartridge weight
18,5 g
Replacement stylus unit
Digitrack | The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 22 dB |
| Channel separation at 15 kHz |
> 15 dB |
| Frequency range at - 3dB |
20-25.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 65 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
| The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.
The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
| TECHNICAL DATA |
|
| Output voltage at 1000 Hz, 5cm/sec. |
5,5 mV |
| Channel balance at 1 kHz |
1,5 dB |
| Channel separation at 1 kHz |
22 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at - 3dB |
20-22.000 Hz |
| Frequency response |
20-20.000 Hz + 3 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force |
70 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,6-2,0g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
1,3 kOhm |
| Internal inductance |
700 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
150-300 pF |
| Cartridge colour, body/stylus |
Black/Red |
| Cartridge weight |
7,2 g |
| Replacement stylus unit |
2M Red |
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
Reviews
There are no reviews yet.