Audio Technica AT8464 Audio-Technicaʼs dual-ear microphone mount

The AT8464 dual-ear microphone mount is included with the BP892 headset and allows you to convert your single ear-worn BP892 MicroSet® to a dual-ear-worn unit for maximum stability and comfort. The BP892 fits on either side of the dual-ear microphone mount, allowing the microphone to be worn to either the left or right of your mouth. The headband easily adjusts to fit both children and adults. The AT8464 is available in black (AT8464) and theatre beige (AT8464-TH) and is compatible with all BP892 and AT892 MicroSet models.

Ultra-lightweight headset mic handles high SPL with excellent
fidelity. Low profile design is ideal for high quality
presentations, live or on air. Black. Includes APS911 phantom
power adapter. Requires 9-52 V phantom power.

Specifications

Type
   

Pre-polarized Condenser

Polar Pattern
   

Omni-directional

Frequency Response
   

20Hz - 20kHz

Impedance
   

1000 Ohms

Sensitivity
   

@1k 5 mV/Pa

• Excellent feedback rejection
• Microphone includes a detachable cap as integral wind/popshield
• Individually adjustable to all head sizes
• Neckband design keeps the microphone clear from shirt-collar or clothing
• Twist-proof microphone boom (Ø 2.0 mm), can be attached to the left or right side
• Microphone boom is adjustable in length and angle
• Flexible gooseneck section
• Connection cable can easily be interchanged
• All metal parts coated in a physical vapour deposition process
• Can also be used with the omni-directional HSP 2 boom microphone

• Boom microphone
• Neckband
• Connection cable
• Plastic transport case, foam-lined with cut-outs
• Operating instructions

• Pick-up pattern  cardioid
• Frequency response  40...20 000 Hz
• Nominal impedance  (@ 1 kHz) 1000 Ohm
• Min. terminating impedance  4700 Ohm
• Sensitivity in free field, no load (1kHz)  4 mV/Pa
• Maximum sound pressure level (passiv)  150 dB
• Equivalent noise level  37 dB(A)
• Current consumption  ca. 250 µA
• Operating voltage (stand alone)  4,5-15 V
• Cable length  1,6 m
• Diameter  microphone head 8,4 mm
• Diameter  boomarm 2,4 mm
• Weight  9,2 g (without cable)

The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.

Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.

The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.

The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.

Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.

Included Accessories

• pop filter,
• clip,
• tool kit,
• anti trauma case,
• mini furry,
• micon cable

ansducer Type
Electret condenser

Polar Pattern
Omnidirectional

Frequency Response
20 to 20,000 Hz

Output Impedance
N / A

Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)

Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL

Signal-To-Noise Ratio
60 dB

Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB

Self-Noise (equivalent SPL, A-weighted, typical)
34 dB

Operating Temperature Range
-18°C (0°F) to 57°C (135°F)

Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1

Power Requirements
+5 V DC (130 μA minimum)

Weight
19.76 g

The AKG C520L is a head-worn condenser microphone with maximum dynamic range for perfect vocal sound.

The AKG C520L can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.

The AKG C520L is an ideal choice for frontmen, singing keyboardists, drummers, guitarists, and dancers. The microphone arm mounts either on the left or right side of the headband as desired. Its cardioid polar pattern effectively rejects unwanted ambient noise. The C 520 provides the perfect solution for any performer needing a handsfree microphone.

A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.

AKG C520L main features include:

• Head-worn microphone with continuously adjustable behind-the-neck headband
• External shock mount for high mechanical-noise rejection
• Miniature gooseneck for precise positioning near the user's mouth
• Microphone arm provides choice of left or right-hand use
• Polar pattern: cardioid
• Frequency range: 60 Hz to 20 kHz
• Sensitivity: 5 mV/Pa (-46 dBV)
• Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
• Equivalent noise level: 31 dB-A
• Impedance: = 2000 ohms
• Connector:3-pin mini XLR
• Cable: C 520 L: 1.5 m (5 ft.)
• Finish: matte black
• Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
• Net weight: 26 g (0.9 oz.)