Content |
Audio-Technica's AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica's shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.
Designed for video production and broadcast (ENG/EFP) audio acquisition
Extremely short length (under 7“) ideal for use with compact digital cameras
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Tailored response minimizes camera and handling noise
Operates on phantom power only
RoHS compliant free from all substances specified in the EU directive on hazardous substances
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 90-20,000 Hz
Open Circuit Sensitivity: 30 dB (31.6 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 107 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Weight: 80 g (2.8 oz)
Dimensions: 175.0 mm (6.89“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; windscreen; soft protective pouch
| Broadcast sound quality
Low noise circuitry
Internal rechargeable lithium battery, supplying over 150 hours operation
Fully charged in under two hours via MicroUSB
Rugged metal construction
Convenient digital switching
High Frequency Boost
High Pass Filter (Flat/75Hz)
PAD (-10db)
MicroUSB cable included
Ten year extended warranty with online registration
Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.
The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.
Visit the NTG4+ feature page
NTG4+ Specifications
Acoustic Principle Line Gradient
Capsule 0.50“
Polar Pattern Supercardioid
Address Type End
Frequency Range 20Hz - 20kHz(selected HPF @75Hz)
Output Impedance 200Ω
Maximum SPL 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 16dB-A
Power Options +12V phantom power+24V phantom power+48V phantom powerInternal battery
Weight 176gm
Dimensions 278mmH x 22mmW x 22mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration | RODE NT G8 Broadcast Quality RF-bias Shotgun Microphone
Based on RØDE's award winning NTG3, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.
Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.
The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.
Acoustic Principle Line Gradient
Active Electronics RF Bias
Capsule 0.50“
Polar Pattern Hyper Cardioid
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 2Ω
Maximum SPL 124dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 8.2dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options
(44-52V min 2.5mA)
Weight 345.00gm
Dimensions 559.00mmH x 19.00mmW x 19.00mmD
Output XLR | The R?DE VideoMic is a professional grade shotgun microphone. Based on the
latest ?Film industry? technology, the VideoMic is designed specifically for use with
high quality Digital Video Cameras.
The microphone exhibits low noise and an unusually wide bandwidth for its size. It
is ultra lightweight, yet rugged due to it?s ABS construction. The VideoMic is powered
by a standard 9 V battery and offers a Low Battery LED status indicator and a
switchable high pass filter to reduce unwanted low frequency rumble.
The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting
and utilizes a stereo mini jack for audio output.
SPECIFICATIONS:
Features:
Studio recording quality. Rugged fibre-reinforced ABS construction. 9 V battery operation.
Custom designed integral wind shield. Condenser Microphone. Low noise circuitry. Low
handling noise. Integral camera-shoe mount. Designed & manufactured in Australia.
Full 2 year guarantee.
Operation power:
The VideoMic is designed to operate from a 9 V battery (ANSI:1604A or IEC:6LR61).
The battery is conveniently located within the support arm of the microphone. A fully
removable access cover and a 1-way insertion mechanism ensure ease of loading.
The battery will provide more than 100 hrs. of continuous use due to a low consumption
of only 5.0 mA.
Operation output impedance:
The microphone will operate satisfactorily into a load impedance as low as 1 k?.
If a load below this is used, the output signal level will be reduced.
Acoustic principle: Line plus Gradient
Directional pattern: Super-Cardioid
Frequency range:
40 Hz ~ 20 000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
74 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 20 dB SPL (per IEC651, IEC268-15)
Maximum spl: 134 dB (@ 1% THD into 1 kΩ)
Sensitivity:
-38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 114 dB (per IEC651, IEC268-15)
Power supply voltage:
9 V DC Alkaline Battery (ANSI:1604A or IEC:6LR61)
Current consumption: 5 mA
Battery life: >100 hours
Output connection: Stereo mini jack plug - ?3.5 mm.
Weight: 176 grm.
Dimensions width: 250mm
Dimensions depth: 65mm
Dimensions height: 102mm |
The CS-50 is a compact, light-weight stereo condenser microphone designed for the R-4 and R-4 Pro, videographer, broadcaster, and sound designer. The CS-50 features bass roll-off capability as well as selectable wide stereo or narrow (focused) polar patterns.
From Edirol, the CS-50 Stereo Microphone is designed for use with the Edirol/Roland R4 portable digital field recorder. The microphone features wide stereo and narrow polar patterns. The wide stereo pattern reproduces audio with accurate stereo imaging while the mono pattern is focused and reduces signal at the sides of the capsule. The CS-50 features a low frequency roll-off switch for eliminating hum and low-frequency noise due to wind or proximity effect. A dual XLR output cable is supplied.
Wide Stereo PatternThe wide stereo pattern provides a generous pick up area while reproducing signal with accurate stereo placement. This setting is ideal for ambiance capturing, live music, sound effects, etc.Mono (Narrow) PatternThe narrow pattern provides a focused pick up at the front end of the capsule. The result is an accurate signal without noise at the off-axis sections of the capsule.Low Frequency Roll-OffThe low-frequency roll-off switch eliminates hum and low-frequency noise due to wind, handling and proximity effect.Light Weight ProfileThe light weight, slim profile make the CS-50 ideal for location use while mounted on a boom, pistol grip or camera.
What's in the Box:
- Windscreen
- Desktop Prop
- Mic Stand Adapter
- L/R XLR Cable 6.56 feet (2m)
- Soft case
- 1 Year Warranty
Specifications: ransducer | Back Electret Condenser | Polar Pattern | Line Cardioid | Frequency Response |
50 - 20,000Hz
| Open Circuit Sensitivity | 14.9 mV/Pa, -36.5 dBV @ 1 Pa | Dynamic Range (Typical) | Not Specified by Manufacturer | Signal-to-Noise Ratio | Greater than 70dB (at 1kHz/1Pa) | Maximum Input Sound Level | 126dB S.P.L (at 1kHz, 1% T.H.D. Typical) | Power Requirements | 48V Phantom x 2ch | Output Impedance | 200 Ohms | Current Consumption | 3.8 mA (Typical) | Output Connectors | 3-pin XLR | Pad | No | Low Frequency Roll-Off | Yes | Dimensions | Not Specified by Manufacturer | Weight | 2.92 oz (83g) |
|
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-18,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 175 g (6.2 oz)
Dimensions: 539.0 mm (21.22“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8147 windscreen; two O-Rings; protective carrying case
|
Reviews
There are no reviews yet.