| Content |
The half-inch standard mount AT95E phonograph cartridge offers outstanding clarity and detail. Reviewers have rated this affordable, high-performance cartridge as a best buy value. Manufactured to Audio-Technica's renowned quality standards, each cartridge is meticulously assembled with remarkably tight tolerances. The elliptical diamond stylus is designed to track record grooves with high accuracy for outstanding audio reproduction. Includes mounting hardware and stylus guard.
| Frequency Response |
20-20,000 Hz |
| Channel Separation |
>20 dB at 1 kHz |
| Tracking Force Range |
1.5-2.5 grams
2.0 grams (20 mN) recommended tracking force |
| Recommended Load Impedance |
47,000 ohms |
| Output |
3.5 mV (1 kHz, 5 cm/sec) |
| Channel Balance |
within 2.0 dB |
| Stylus Type |
0.3 x 0.7 mil elliptical diamond stylus |
| Cantilever |
Aluminum pipe |
| Mount |
Half-inch |
| Replacement Stylus |
ATN95E |
|
NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance | A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542:
- Tracking ability at 315Hz at
recommended tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output | The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 22 dB |
| Channel separation at 15 kHz |
> 15 dB |
| Frequency range at - 3dB |
20-25.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 65 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
| The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.
The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
| TECHNICAL DATA |
|
| Output voltage at 1000 Hz, 5cm/sec. |
5,5 mV |
| Channel balance at 1 kHz |
1,5 dB |
| Channel separation at 1 kHz |
22 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at - 3dB |
20-22.000 Hz |
| Frequency response |
20-20.000 Hz + 3 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force |
70 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,6-2,0g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
1,3 kOhm |
| Internal inductance |
700 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
150-300 pF |
| Cartridge colour, body/stylus |
Black/Red |
| Cartridge weight |
7,2 g |
| Replacement stylus unit |
2M Red |
|
Reviews
There are no reviews yet.