Audio Technica ATCS-A60MX IR transmitter/receiver mixer

The long throw antenna system is made up of three components; The ATCS-A60MX mixer the ATCS-A60RX receiver antenna and the ATCS-A60TX transmitting antenna.

ATCS-A60MX IR transmitter/receiver mixer
•  The master antenna mixer can power up 4 transmitter antennas and 4 receiving antennas.
•  Infrared transmission keeps the signal in the room. Therefore multiple conference systems can be used in
adjacent rooms and the conference stays secure.
•  The ATCS-A60MX includes rack mount adaptors

ATCS-A60RX IR Receiving Antenna (green indicator)
•  The high-power receiving antenna can work up to 15 meters for large conference rooms or high ceiling
meeting rooms.
•  The A60RX can be stand mounted and wall mounted

ATCS-A60TX IR receiver antenna (red indicator)
•  The high-power transmitting antenna can work up to 20 meters for large conference rooms or high ceiling
meeting rooms.
•  The A60RX can be stand mounted and wall mounted

• IR transmitting unit terminal: BNC×4(75 ohms)
• IR receiving unit terminal: BNC×4(75 ohms)
• I/O terminal: BNC×1(75 ohms)
• Operating temperature range: 0 to +40C°
• Power consumption: 50W
• Power supply: 100 to 240VAC, 50/60 Hz
• Dimensions: 44 (H) x 420 (W) x 225 (D) mm
• Weight Approx.: 3.0 kg
• Accessories: AC cord, Rack-mount adapter x 2, Screw to attach the rack-mount adapter x

• Communication method: IR wireless system
• Operating frequency band: 8 to 10 MHz  1 to 5 MHz
• IR wavelength: 870 nm
• Modulation method: Frequency modulation
• Operating distance*: 20 m (TX) 15 m (RX)
• Operating temperature range: 0 to 40C°
• Connecting terminal: BNC jack
• Power supply: 24V dc supplied from the ATCS-A60MX
• Dimensions: 44 (H) x 149 (W) x 97 (D) mm
• Weight: 351 g (TX) 386 g (RX)

User's Manual

The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis

• Product type: Belt pack receiver
• Radio frequency range: 823 - 832 and 863 - 865 MHz
• Channels: 96 (8 groups of 12 channels)
• Transmission method: FM, stereo
• Frequency response: 80 Hz - 15 kHz ± 3 dB
• Audio outputs: 3.5 mm jack
• Max. audio output level: 100 mW
• Controls: Up, Down, Set, Volume
• Indicators: LC display, RF (LED)
• Power supply: 2 x 1.5 V AA
• Operating time: > 10 hrs.
• Width: 65 mm
• Height: 95 mm
• Depth: 25 mm

Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.

The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.

• Available in the following frequency bands:
  541.500 - 566.375 MHz (C Band)
  655.500 - 680.375 MHz (D Band)
  721.500 - 746.375 MHz (G Band)
• 25 kHz frequency spacing makes it easier to find a clear, open
• frequency in crowded RF environments
• Dual RF power output selection to optimize battery life
• Digital Tone Lock™ squelch that communicates transmitter data
• to the receiver
• Function menu displayed in a backlit LCD window, controlled by
• internal soft-touch controls
• High efficiency dual companding system for flawless audio
• Four nameable user presets
• Battery fuel gauge on LCD readout
• Recessed microphone input connector
• Power/mute lock provision as well as safety door to cover controls
• Dual-colour power/mute status indictor
• Microphone or line input with DC bias voltage
• 18 dB audio input level adjustment
• Operates on two AA batteries
• Captive locking battery compartment door
• Adjustable squelch
• Rugged metal housing with a reversible clothing clip

• RF Power Output: High: 35 mW; Low: 10 mW, nominal
• Spurious Emissions: According to National Regulations
• Microphone Dynamic Range: >=110 dB, A-weighted
• Instrument Dynamic Range: >=110 dB, A-weighted
• Input Connections: High impedance, low impedance, bias
• Batteries: Two 1.5V AA alkaline (not included)
• Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
• Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
• Net Weight: 125 g

Audio-Technicaʼs System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• 2.4 GHz range – completely free from TV interference
• Three levels of diversity assurance: frequency, time, & space
• Two switched TRS balanced 1/4" output jacks
• Output mode selector and foot switch to toggle between outputs or mute/unmute Output A without muting Output B (e.g., for use with tuner)
• Multi-pairing function to link a single receiver with up to eight body-pack transmitters
• Transmitter battery level display on receiver
• Automatic frequency selection for seamless, interference-free operation
• Extremely easy operation with instantaneous channel selection, sync, and setup
• State-of-the-art digital receiver housed in a strong, metal, stompbox-style body for reliable performance and pedal board mounting
• Included hook & loop strips for adding receiver to effects pedal board
• Universal (center + or -) 9v–12v DC input

• Operating Frequencies: 2.4 GHz ISM band
• Dynamic Range: >109 dB (A-weighted), typical
• Total Harmonic Distortion: 7 hours (alkaline)
• Depending on battery type and use pattern

This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.

 Battery disposal information [77,1 KB]
  User's manual [7,82 MB]

The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis

• 
  
• Product type: Transmitter
• Radio frequency range: 823 - 832 and 863 - 865 MHz
• Channels: 96 (8 groups of 12 channels)
• Transmission method: FM, stereo
• RF output: 10 mW
• Frequency response: 60 Hz - 16 kHz
• S/N ratio: 85 dB
• Inputs: 2
• Input connections: XLR/ 6.3 mm jack (combo)
• Input impedance: 14 kOhm
• Antenna connector: TNC
• Controls: up, down, set, power, volume headphone, input level, pad
• Indicators: LC display
• Power supply: 12 - 18 V DC
• Width: 200 mm
• Height: 44 mm
• Depth: 96 mm
• Accessories (included): Antenna, power supply, headphones