Content |
The Artist Series new kick-drum mic, the ATM250DE dual-element instrument microphone features cardioid condenser and hypercardioid dynamic capsules combined in a single housing. Audio-Technica's innovative use of two polar patterns is ideal for kick drum: the hypercardioid dynamic element focuses tightly on the aggressive attack of the beater, while the condenser captures the round tonalities of the shell. The elements are positioned in a perfect phase relationship, something practically impossible to achieve with two separate microphones. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.
Audio-Technica's proven dual-element design features two elements (condenser and dynamic) enclosed in a single housing
Neodymium dynamic element provides punch and attack, while the condenser element captures the full audio spectrum
Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
Perfect for kick drum, guitar amps and instrument use
Integral 80 Hz HPF switch and 10 dB pad (condenser element)
Versatile mounting options and effective dampening of mechanical noise thanks to included AT8471 isolation clamp
Corrosion-resistant contacts from gold-plated XLRM-type connector
Rugged, all-metal design and construction for years of trouble-free use
Frequency Response: 40-20,000 Hz (condenser) 40-15,000 Hz (dynamic)
Low Frequency Roll Off: 80 Hz, 12 dB/octave (condenser)
Open Circuit Sensitivity: 49 dB (3.5 mV) re 1V at 1 Pa (condenser) -53 dB (2.2 mV) re 1V at 1 Pa (dynamic)
Impedance: 50 ohms (condenser) 600 ohms (dynamic)
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser)
Dynamic Range: 122 dB, 1 kHz at Max SPL (condenser)
Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa (condenser)
Phantom Power Requiremens: 11-52V DC, 3.5 mA typical (condenser)
Weight: 320 g (11.3 oz)
Dimensions: 143.6 mm (5.65“) long, 55.0 mm (2.17“) diameter
Output Connector: Integral 5-pin XLRM-type
Cable: 5.0 m (16.5') dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
Accessories: AT8471 isolation clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 adapter; soft protective pouch
|
The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.
Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g
|
NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.
Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.
Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutters
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
|
Audio Frequency Response 20 Hz - 10,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 150 Ω
Mic Type Instrumental
Open Circuit Voltage 0.63 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Shipping Weight 23.7 oz (672 g)
Wired/Wireless Wired
Weight Net 12.84 oz (364 g)
| The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments.
Features
Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount
Delivery Includes
1 e 604
1 drum clip
1 pouch
Technical Data
Frequency Response 40.....18000 Hz
Sensitivity in free field, no load (1kHz) 1,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 33 x 59 mm
Weight w/o cable 60 g |
Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string musical instruments
|
Reviews
There are no reviews yet.