AUDIO TECHNICA ATN3472SE Turntable stylus

Discontinued

38.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Replacement stylus for Audio-Technica AT92ECD, AT301EP, AT311EP & AT316EP cartridges. Stylus Shape: Elliptical Stylus Dimension: 0.3 x 0.7 mil To remove old stylus (needle), hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge. To install replacement stylus, insert the new stylus assembly into […]

 

Read more

Replacement stylus for Audio-Technica AT92ECD, AT301EP, AT311EP & AT316EP cartridges.

Stylus Shape: Elliptical
Stylus Dimension: 0.3 x 0.7 mil

To remove old stylus (needle), hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge.

To install replacement stylus, insert the new stylus assembly into the cartridge. The stylus assembly should click into place when fully seated on the cartridge. The stylus must be fully seated on the body for proper operation

Weight 0.05 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA ATN3472SE Turntable stylus”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA ATN3472SE Turntable stylus removeORTOFON STYLUS DJ E Needle removeDUAL DN149S HI-FI STYLUS Needle by Ortofon removeORTOFON STYLUS 14 removeORTOFON STYLUS 520MKII removeORTOFON 3E REPLACEMENT STYLUS remove
NameAUDIO TECHNICA ATN3472SE Turntable stylus removeORTOFON STYLUS DJ E Needle removeDUAL DN149S HI-FI STYLUS Needle by Ortofon removeORTOFON STYLUS 14 removeORTOFON STYLUS 520MKII removeORTOFON 3E REPLACEMENT STYLUS remove
Image
SKUATN3472SESTYLUS DJ EDN149SSTYLUS14520MKII3E
Rating
Price38.00 incl. GR VAT 50.84 incl. GR VAT 55.79 incl. GR VAT57.00 incl. GR VAT 169.00 incl. GR VAT50.00 incl. GR VAT
Stock

Out of stock

In stock (can be backordered)

In stock (can be backordered)

In stock

In stock

In stock

AvailabilityOut of stockIn stock (can be backordered)In stock (can be backordered)In stockIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Replacement stylus for Audio-Technica AT92ECD, AT301EP, AT311EP & AT316EP cartridges.

Stylus Shape: Elliptical
Stylus Dimension: 0.3 x 0.7 mil

To remove old stylus (needle), hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge.

To install replacement stylus, insert the new stylus assembly into the cartridge. The stylus assembly should click into place when fully seated on the cartridge. The stylus must be fully seated on the body for proper operation

DJ E Replacement stylus

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.  

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. 

DJ E Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. -   6 mV
Channel balance at 1kHz  -  2 dB
Channel separation at 1kHz  -  23 dB
Channel separation at 15 kHz  -  15 dB
Frequency range at -3dB  -  20-22.000 Hz
Frequency response -   20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force  -  80 μm
Compliance, dynamic lateral  -  9 μm/m N
Stylus type  -  Special Elliptical
Stylus tip radius  -  r/R 13/25 μm

Tracking force range  -  2,0-4,0 g (20-40 mN)
Tracking force recommended  -  3,0 g (30 mN)
Tracking angle -   20°
Internal impedance, DC resistance  -  750 Ohm
Internal inductance  -  450 mH
Recommended load resistance   - 47 kOhm
Recommended load capacitance -  200-600 pF
Cartridge weight  -  18,5 g

Compatible with cartridges -  DJ S

Technical data Frequency range 20-20.000 Hz Frequency response 20-15.000 Hz + 2 / - 3 dB Tracking ability at 315Hz at recommended tracking force *) 60 µm Compliance, dynamic, lateral 15 µm/mN Stylus type spherical Stylus tip radius r/R 8/18 µm Equivalent stylus tip mass 0,5 mg Tracking force range 1,25-2,25 g (17,5-22,5 mN) Tracking force, recommended 2,0 g (20 mN) Tracking angle 20° Stylus colour Black Recommended for following cartridges - Dual TKS 49 S *) Typical value

Ortofon 14 Stylus Technical Data

  • Frequency range 20-22.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 2 dB
  • Tracking ability at 315Hz at recommended tracking force *) 70 µm
  • Compliance, dynamic, lateral 25 µm/mN
  • Stylus type Elliptical
  • Stylus tip radius r/R 8/18 µm
  • Equivalent stylus tip mass 0,5 mg
  • Tracking force range 1,0-1,5 g (10-15 mN)
  • Tracking force, recommended 1,25 g (12,5 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges TM 14U
  • Ortofon 520MKII Stylus Technical Data
    • Frequency range 20-23.000 Hz
    • Frequency response 20-20.000 Hz + 2 / - 3 dB
    • Tracking ability at 315Hz at recommended tracking force 70 µm
    • Compliance, dynamic, lateral 25 µm/mN
    • Stylus type Nude Elliptical
    • Stylus tip radius r/R 8/18 µm
    • Equivalent stylus tip mass 0,3 mg
    • Tracking force range 1,25-1,75 g (12,5-17,5 mN)
    • Tracking force, recommended 1,5 g (15 mN)
    • Tracking angle 20°
    • Stylus colour Black
    • Recommended for following cartridges Series 520 Mkll, 520, 520 P

    Stylus 3E

    Technical data
    Frequency range 20-20.000 Hz
    Frequency response 20-18.000 Hz + 2 / - 3 dB
    Tracking ability at 315Hz at recommended tracking force *) 60 µm
    Compliance, dynamic, lateral 20 µm/mN
    Stylus type Elliptical
    Stylus tip radius r/R 8/18 µm
    Equivalent stylus tip mass 0,5 mg
    Tracking force range 1,5-2,0 g (15-20 mN)
    Tracking force, recommended 1,75 g (17,5 mN)
    Tracking angle 20°
    Stylus colour Black
     
    Recommended for following cartridges OM 3E, OMP 3E

    *) Typical value

     

    Weight0.05 kg0.30 kg0.20 kg0.20 kg0.20 kg0.20 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.05 kg
    Weight 0.30 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.20 kg