AUDIO TECHNICA ATN85EP Turntable Elliptical stylus

45.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
0.3 X 0,7 mil elliptical replacement stylus for these cartridges: AT85EP, AT301EP, AT311EP, AT316EP, AT92ECD. Aluminium Cantilever elliptical stylus Bonded Round Shank

 

Read more

0.3 X 0,7 mil elliptical replacement stylus for these cartridges:
AT85EP, AT301EP, AT311EP, AT316EP, AT92ECD.

  • Aluminium Cantilever
  • elliptical stylus
  • Bonded Round Shank
Weight 0.05 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA ATN85EP Turntable Elliptical stylus”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA ATN85EP Turntable Elliptical stylus removeORTOFON DJ S STYLUS removeORTOFON STYLUS 10 removeDUAL DN149S HI-FI STYLUS Needle by Ortofon removeORTOFON STYLUS Arkiv removeORTOFON 2M Bronze Stylus Type Nude Fine Line remove
NameAUDIO TECHNICA ATN85EP Turntable Elliptical stylus removeORTOFON DJ S STYLUS removeORTOFON STYLUS 10 removeDUAL DN149S HI-FI STYLUS Needle by Ortofon removeORTOFON STYLUS Arkiv removeORTOFON 2M Bronze Stylus Type Nude Fine Line remove
Image
SKUATN85EPSTYLUS DJ SStylus10DN149SSTYLUSARKIVST2MBRONZE
Rating
Price 45.00 incl. GR VAT48.99 incl. GR VAT80.00 incl. GR VAT 55.79 incl. GR VAT48.99 incl. GR VAT259.00 incl. GR VAT
Stock

In stock

In stock (can be backordered)

Available on backorder

In stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityIn stockIn stock (can be backordered)Available on backorderIn stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

0.3 X 0,7 mil elliptical replacement stylus for these cartridges:
AT85EP, AT301EP, AT311EP, AT316EP, AT92ECD.

  • Aluminium Cantilever
  • elliptical stylus
  • Bonded Round Shank
DJ S Replacement stylus DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world! DJ S Stylus Technical data Output voltage at 1000Hz, 5cm/sec.  - 6 mV Channel balance at 1kHz  - 2 dB Channel separation at 1kHz  - 23 dB Channel separation at 15 kHz  - 15 dB Frequency range at -3dB  - 20-20.000 Hz Frequency response  - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force  - 80 μm Compliance, dynamic lateral -  9 μm/m N Stylus type  - Spherical Stylus tip radius  -  R 18 μm Tracking force range  - 2,0-4,0 g (20-40 mN) Tracking force recommended -  3,0 g (30 mN) Tracking angle -  20° Internal impedance, DC resistance -  750 Ohm Internal inductance  - 450 mH Recommended load resistance  - 47 kOhm Recommended load capacitance  - 200-600 pF Cartridge weight  - 18,5 g Compatible with cartridges -  DJ S
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A 
Technical data Frequency range 20-20.000 Hz Frequency response 20-15.000 Hz + 2 / - 3 dB Tracking ability at 315Hz at recommended tracking force *) 60 µm Compliance, dynamic, lateral 15 µm/mN Stylus type spherical Stylus tip radius r/R 8/18 µm Equivalent stylus tip mass 0,5 mg Tracking force range 1,25-2,25 g (17,5-22,5 mN) Tracking force, recommended 2,0 g (20 mN) Tracking angle 20° Stylus colour Black Recommended for following cartridges - Dual TKS 49 S *) Typical value

The Ortofon Arkiv stylus Boasts clear and accurate sound reproduction and remarkable stereo imaging, making it perfectly suited for sampling, transcription, and numerous other professional applications.

Replacement stylus to be used in Ortofon Arkiv OM and Concorde cartridges. Growing demand for the ability to transcribe vinyl to digital formats has prompted the creation of Ortofon Arkiv cartridge - a cartridge specially designed to provide optimized sound quality specifically for recording purposes. The Ortofon Arkiv cartridge boasts clear and accurate sound reproduction and remarkable stereo imaging, making it perfectly suited for sampling, transcription, and numerous other professional applications.

Ortofon Arkiv Cartridge Specifications:

Frequency response: 20 to 20.000 Hz
Output: 6mV
Channel separation nominal: 23dB
Inductance: 450mH/ch
Weight: 5g
Tracking force: 3 grams
Recommended load: 47K ohms 200pf
Stylus tip: Special elliptical

Technical data
Frequency range 20-29.000 Hz
Frequency response 20-20.000 Hz + 2 / -0 dB
Tracking ability at 315Hz at recommended tracking force *) 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7 g (14-17 mN)
Tracking force, recommended 1,5 g (15,0 mN)
Tracking angle 20°
Stylus colour Bronze
Recommended for following cartridges 2M BRONZE
Weight0.05 kg0.30 kg0.20 kg0.20 kg0.20 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.05 kg
Weight 0.30 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.20 kg