Audio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module

399.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement. The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element […]

 

Read more

With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired & wireless models, the BP896 comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.

  • Inconspicuous, lightweight capsule
  • Extremely intelligible natural audio
  • Handles high sound pressure levels with ease
  • Rugged built for long-lasting performance
  • High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Requires 11V to 52V DC phantom power
  • Includes generous accessory kit & protective case
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
  • Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
  • Impedance: 250 ohms (wired only)
  • Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
  • Dynamic Range (Typical): 104 dB, 1 kHz at Max SPL (wired only)
  • Signal-to-Noise Ratio: 63 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
  • Switch: Flat, roll-off (wired only)
  • Current Consumption: 0.1 mA typical at 5V (wireless only)
  • Voltage Range: 2.5-11V (wireless only)
  • Weight (Microphone): 0.14 g (0.005 oz)
  • Weight (Power Module): 85 g (3.0 oz) (wired only)
  • Dimensions (Microphone): 10.8 mm (0.43“) long, 2.6 mm (0.10“) diameter
  • Dimensions (Power Module): 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
  • Output Connector (Power Module): Integral 3-pin XLRM-type
  • Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
  • Accessories Furnished: BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case
    BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
  • Audio-Technica Case Style: M39
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module removeARTSOUND TS-332/S Table or Wall base for Gooseneck nikel removeSHURE MX400SMP Microflex Surface Mount Preamp removeAKG GN 30 CS MODULE GOOSENECK 30cm removeAKG GN 15 Module gooseneck 15cm removeSHURE MX890 Microflex Wireless Desktop Bas remove
NameAudio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module removeARTSOUND TS-332/S Table or Wall base for Gooseneck nikel removeSHURE MX400SMP Microflex Surface Mount Preamp removeAKG GN 30 CS MODULE GOOSENECK 30cm removeAKG GN 15 Module gooseneck 15cm removeSHURE MX890 Microflex Wireless Desktop Bas remove
Image
SKUBP896TS332/SMX400SMPGN 30 CSGN 15MX890
Rating
Price 399.00 incl. GR VAT2.50 incl. GR VAT 210.24 incl. GR VAT 122.00 incl. GR VAT 96.34 incl. GR VAT 430.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

In stock

In stock

In stock

AvailabilityIn stockAvailable on backorderIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired & wireless models, the BP896 comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.

  • Inconspicuous, lightweight capsule
  • Extremely intelligible natural audio
  • Handles high sound pressure levels with ease
  • Rugged built for long-lasting performance
  • High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Requires 11V to 52V DC phantom power
  • Includes generous accessory kit & protective case
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
  • Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
  • Impedance: 250 ohms (wired only)
  • Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
  • Dynamic Range (Typical): 104 dB, 1 kHz at Max SPL (wired only)
  • Signal-to-Noise Ratio: 63 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
  • Switch: Flat, roll-off (wired only)
  • Current Consumption: 0.1 mA typical at 5V (wireless only)
  • Voltage Range: 2.5-11V (wireless only)
  • Weight (Microphone): 0.14 g (0.005 oz)
  • Weight (Power Module): 85 g (3.0 oz) (wired only)
  • Dimensions (Microphone): 10.8 mm (0.43“) long, 2.6 mm (0.10“) diameter
  • Dimensions (Power Module): 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
  • Output Connector (Power Module): Integral 3-pin XLRM-type
  • Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
  • Accessories Furnished: BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case
    BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
  • Audio-Technica Case Style: M39
DAP AUDIO TS-332 Table or Wall base for Gooseneck nikel


Add To Favorites

MX400SMP Microflex Surface Mount Preamp
Shure

Surface mount preamp for use with MX405, MX410, and MX415 Microflex® Modular Gooseneck Microphones. Mounts the microphone to a table or other surface through a drilled 1" hole.

Product Overview:

Logic enabled for LED control
5 pin XLR connector included
Low cut filter
CommShield® Technology

acrobat_reader_logo.

Weight0.10 kg0.07 kg0.20 kg0.50 kg0.40 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.07 kg
Weight 0.20 kg
Weight 0.50 kg
Weight 0.40 kg
Weight 0.50 kg