Audio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module

399.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement. The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element […]

 

Read more

With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired & wireless models, the BP896 comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.

  • Inconspicuous, lightweight capsule
  • Extremely intelligible natural audio
  • Handles high sound pressure levels with ease
  • Rugged built for long-lasting performance
  • High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Requires 11V to 52V DC phantom power
  • Includes generous accessory kit & protective case
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
  • Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
  • Impedance: 250 ohms (wired only)
  • Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
  • Dynamic Range (Typical): 104 dB, 1 kHz at Max SPL (wired only)
  • Signal-to-Noise Ratio: 63 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
  • Switch: Flat, roll-off (wired only)
  • Current Consumption: 0.1 mA typical at 5V (wireless only)
  • Voltage Range: 2.5-11V (wireless only)
  • Weight (Microphone): 0.14 g (0.005 oz)
  • Weight (Power Module): 85 g (3.0 oz) (wired only)
  • Dimensions (Microphone): 10.8 mm (0.43“) long, 2.6 mm (0.10“) diameter
  • Dimensions (Power Module): 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
  • Output Connector (Power Module): Integral 3-pin XLRM-type
  • Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
  • Accessories Furnished: BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case
    BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
  • Audio-Technica Case Style: M39
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module removeAKG GN 30 ESP Μodule gooseneck 30cm removeAKG GN 50 ESP Μodule gooseneck 50cm removeSHURE MX890 Microflex Wireless Desktop Bas removeAudio Technica AT899AK Accessory kit for AT898 and AT899 models removeAKG GN 50E MODULE GOOSENECK 50cm LED remove
NameAudio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module removeAKG GN 30 ESP Μodule gooseneck 30cm removeAKG GN 50 ESP Μodule gooseneck 50cm removeSHURE MX890 Microflex Wireless Desktop Bas removeAudio Technica AT899AK Accessory kit for AT898 and AT899 models removeAKG GN 50E MODULE GOOSENECK 50cm LED remove
Image
SKUBP896GN 30 ESPGN 50 ESPMX890AT899AKGN 50E
Rating
Price 399.00 incl. GR VAT 343.00 incl. GR VAT 364.00 incl. GR VAT 430.00 incl. GR VAT 59.52 incl. GR VAT 242.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired & wireless models, the BP896 comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.

  • Inconspicuous, lightweight capsule
  • Extremely intelligible natural audio
  • Handles high sound pressure levels with ease
  • Rugged built for long-lasting performance
  • High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Requires 11V to 52V DC phantom power
  • Includes generous accessory kit & protective case
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
  • Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
  • Impedance: 250 ohms (wired only)
  • Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
  • Dynamic Range (Typical): 104 dB, 1 kHz at Max SPL (wired only)
  • Signal-to-Noise Ratio: 63 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
  • Switch: Flat, roll-off (wired only)
  • Current Consumption: 0.1 mA typical at 5V (wireless only)
  • Voltage Range: 2.5-11V (wireless only)
  • Weight (Microphone): 0.14 g (0.005 oz)
  • Weight (Power Module): 85 g (3.0 oz) (wired only)
  • Dimensions (Microphone): 10.8 mm (0.43“) long, 2.6 mm (0.10“) diameter
  • Dimensions (Power Module): 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
  • Output Connector (Power Module): Integral 3-pin XLRM-type
  • Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
  • Accessories Furnished: BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case
    BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
  • Audio-Technica Case Style: M39
  • Programmable mute switch
  • High RFI (Radio Frequency Interference) immunity
  • Rugged construction
  • Compatible with all Modular Series capsules
  • Highly reliable contacts for capsule modules
  • Integrated LED ring status indicator
  • Integrated, switchable bass cut
  • Integrated, gold-plated XLR connector

The new GN ESP Series features a programmable mute switch to cover a wide range of applications. A bank of jumpers makes it easy to select the desired switch function for any application:

  • on/off
  • push-to-talk
  • push-to-mute

The mode selection jumpers are hidden inside the housing so they cannot be realigned unintentionally. An LED ring provides a clearly visible MIC ON/OFF indication. The bank of jumpers also allows the LED ring and the integrated bass rolloff filter to be enabled or disabled. In addition, the new electronic circuit design provides high immunity to radio-frequency interference.

Bass filter250 Hz, -10 dB bei 50 Hz
Impedance=2,000 ohms
Supply voltage9 to 52 V phantom power to DIN/IEC
Powering

 

 Paging applications
Lectern

Houses of worship
Conferencing

 

  • Programmable mute switch
  • High RFI (Radio Frequency Interference) immunity
  • Rugged construction
  • Compatible with all Modular Series capsules
  • Highly reliable contacts for capsule modules
  • Integrated LED ring status indicator
  • Integrated, switchable bass cut
  • Integrated, gold-plated XLR connector

The new GN ESP Series features a programmable mute switch to cover a wide range of applications. A bank of jumpers makes it easy to select the desired switch function for any application:

  • on/off
  • push-to-talk
  • push-to-mute

The mode selection jumpers are hidden inside the housing so they cannot be realigned unintentionally. An LED ring provides a clearly visible MIC ON/OFF indication. The bank of jumpers also allows the LED ring and the integrated bass rolloff filter to be enabled or disabled. In addition, the new electronic circuit design provides high immunity to radio-frequency interference.



The MX890 Wireless Desktop Base is fully compatible with SLX® Wireless Systems, including the SLX4L wireless receiver with logic output for applications requiring logic functionality.

The MX890 is designed for use with MX405, MX410, and MX415 Microflex® Modular Gooseneck Microphones.





Operating Range
    30 m (100 ft.)
    Note: Actual range depends on RF signal absorption, reflection, and interference
Frequency Stability
    +/-10 ppm
Maximum Frequency Deviation
    45 kHz
Oscillator Type
    Phase-locked loop (PLL) controlled synthesizer
Power Requirements
    3V (2 AA alkaline or rechargeable batteries)

Battery Life
    ≥8 hours (alkaline)

Accessory kit for AT898 and AT899 models (black) includes clothing clip base, viper base, magnet base, three single holders, two double holders, two element covers and two windscreens.

The DAM Series GN E gooseneck modules for fixed and mobile installation comes with an integrated XLR phantom power adapter with 250Hz bass rolloff, LED ring and ON/OFF jumper. It connects to any standard mixer input with 9V - 52V power supply. The DAM Series GN E gooseneck modules are available in three different lengths: 15cm (6in), 30cm (12in), 50cm (20in). They work perfectly with the extensive range of mounting accessories available in the AKG catalog. The gooseneck module fits all DAM Series capsules, CK31, CK32, CK33, CK47 and CK80, via highly reliable contacts.

Weight0.10 kg0.60 kg0.50 kg0.50 kg0.10 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.60 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.10 kg
Weight 0.10 kg