AUDIO TECHNICA AT-LP3 Fully Automatic Belt-Drive Stereo Turntable WHITE

Discontinued

329.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Fully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell Fully Automatic Belt-Drive system Specially designed AT91R phono cartridge Removable universal AT-HS3 headshell Balanced straight tonearm Switchable MM & MC modes 33⅓ & 45 RPM selectable speeds A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive […]

 

Read more

Fully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell
  • Fully Automatic Belt-Drive system
  • Specially designed AT91R phono cartridge
  • Removable universal AT-HS3 headshell
  • Balanced straight tonearm
  • Switchable MM & MC modes
  • 33⅓ & 45 RPM selectable speeds

A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Balanced straight tonearm with hydraulically damped lift control and lockable rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable modes for moving magnet and moving coil cartridges
  • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
  • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback colouration

Mm / Mc Cartridge Selector Switch

Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.

Cartridge & Stylus
Model AT91R
Type VM Dual Magnet
Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
Stylus Construction 0.6 mil bonded conical
Cantilever Aluminium pipe
Recommended Load Impedance 47,000 ohms
Weight 5.0g
Headshell
Model AT-HS3
Weight 11.1g
Overhang Adjustment 8mm
Tone arm
Type Static balanced straight shaped with soft damping control
Effective Length 221.5mm
Overhang 19mm
Maximum Tracking Error Angle Less than 3°
Stylus Pressure Adjustment Range 1 to 4g
Applicable Cartridge Weight 14.5 to 20g
Anti-skating Range 0 – 3 g
Turntable
Type Fully Automatic, Belt-Drive
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
Signal-to-Noise Ratio > 60 dB
Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec
“LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain 36dB nominal, RIAA equalised
56dB nominal, RIAA equalised
Power Supply Requirements 220 to 240 V / 50, 60 Hz
Power Consumption 2W
Dimensions 435 mm ×353 mm×128 mm (W×D×H)
Weight 5.2kg
Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
Weight 7.00 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA AT-LP3 Fully Automatic Belt-Drive Stereo Turntable WHITE”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA AT-LP3 Fully Automatic Belt-Drive Stereo Turntable WHITE removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Black hg) removePro-Ject Essential II with phono USB Turntable Red removeDENON DP-200 USB Fully Automatic Record Player SILVER removePro-Ject Elemental Phono USB + OM 5e Turntable Silver-Black removeThorens TD 209 Turntable 45 rpm belt drive (black) remove
NameAUDIO TECHNICA AT-LP3 Fully Automatic Belt-Drive Stereo Turntable WHITE removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Black hg) removePro-Ject Essential II with phono USB Turntable Red removeDENON DP-200 USB Fully Automatic Record Player SILVER removePro-Ject Elemental Phono USB + OM 5e Turntable Silver-Black removeThorens TD 209 Turntable 45 rpm belt drive (black) remove
Image
SKUATLP3WTD 240-2 Black HGESIIUSBREDDP-200USBSELEMENTALUSBSBTD 209
Rating
Price 329.00 incl. GR VAT910.00 incl. GR VAT 384.39 incl. GR VAT310.47 incl. GR VAT335.00 incl. GR VAT1,065.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 1 left in stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOut of stockAvailable on backorderOnly 1 left in stockIn stockOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentFully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell
  • Fully Automatic Belt-Drive system
  • Specially designed AT91R phono cartridge
  • Removable universal AT-HS3 headshell
  • Balanced straight tonearm
  • Switchable MM & MC modes
  • 33⅓ & 45 RPM selectable speeds
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Balanced straight tonearm with hydraulically damped lift control and lockable rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable modes for moving magnet and moving coil cartridges
  • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
  • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback colouration
Mm / Mc Cartridge Selector Switch Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.
Cartridge & Stylus
Model AT91R
Type VM Dual Magnet
Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
Stylus Construction 0.6 mil bonded conical
Cantilever Aluminium pipe
Recommended Load Impedance 47,000 ohms
Weight 5.0g
Headshell
Model AT-HS3
Weight 11.1g
Overhang Adjustment 8mm
Tone arm
Type Static balanced straight shaped with soft damping control
Effective Length 221.5mm
Overhang 19mm
Maximum Tracking Error Angle Less than 3°
Stylus Pressure Adjustment Range 1 to 4g
Applicable Cartridge Weight 14.5 to 20g
Anti-skating Range 0 - 3 g
Turntable
Type Fully Automatic, Belt-Drive
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
Signal-to-Noise Ratio > 60 dB
Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec "LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain 36dB nominal, RIAA equalised 56dB nominal, RIAA equalised
Power Supply Requirements 220 to 240 V / 50, 60 Hz
Power Consumption 2W
Dimensions 435 mm ×353 mm×128 mm (W×D×H)
Weight 5.2kg
Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable

High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240-2 with a timeless elegance.

This record player has been equipped with the new TP 19-1 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes

Specs:

  • Operation fully automatic
  • Drive System internal flat drive belt
  • Motor electronically controlled DC motor
  • Speeds 33-1/3, 45, 78 rpm
  • Speed Select electronically
  • Platter 12” / 0.7 kg (aluminium, non-magnetic)
  • Tonearm THORENS® TP 19-1
  • Pick-up Cartridge THORENS® TAS 267
  • Anti-skating (Bias) by spring (adjustable)
  • Automatic Shut-off mechanically
  • Cable Capacitance 160 pF
  • Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
  • Dimensions 430 x 130 x 365 mm (W x H x D)
  • Weight 6.4 kg
  • Finish solid wooden plinth with black piano laquer, black structured enamel,
  • Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

• High precision turntable with cast aluminum plate
• Fully automatic system for easy operation
• Built-in equalizer for connection to PHONO input
• Transfer music from analog LP to USB memory (without PC)
• Includes PC software for assembling tracks

The DP-200USB is a fully automatic record player that easily converts your analogue records into digital files and stores them onto a USB memory stick. Using USB memory makes it easy to carry your digital files when you donʼt have a PC near your record player. 
 Easily store your record library onto USB memory: Simply insert your USB memory stick into the USB port on the front, press the Start and Record buttons, and the DP-200USB converts your record into digital files. You don\'t need to have a PC nearby. When you insert the USB memory stick into a DENON S-52DAB or RCD-M37DAB, you can enjoy the music files in the high-quality sound that Denon audio products are renowned for. You can also record the music to a USB player that supports MP3 files and enjoy listening to the music directly from the player. 
 Includes Trans Music Manager, to obtain track numbers and information: The DP-200USB comes with Trans Music Manager (on CD-ROM) that detects the silent spaces between tracks to automatically split track numbers. You can also use a PC to access the Gracenote® music ID server and obtain track information. 
 Built-in Phono Equalizer: The DP-200USBʼs built-in Phono Equalizer lets you enjoy the music on a mini audio system or radio cassette player that does not have a PHONO jack. (The Phono Equalizer can be switched on or off.) 
 Fully automatic player: When you select the 30cm (12“) or 17cm (7“) record size, the arm automatically moves to the correct position for playing the record, and after itʼs finished, the arm automatically returns to its original position. This automatic system makes it easy to play records on the DP-200USB. 
 Aluminium diecast turntable: The DP-200USB has an aluminium diecast turntable for high inertial mass and stable rotation. 
 Includes MM cartridge 
 Trans Music Manager functions: Auto MP3 Splitter: Detects silent part between tracks and automatically tags tracks / Manual MP3 Splitter: Manually tags tracks as you wish / Auto Music ID Record: automatically enables to record music information including titles / Manual MusicID Record: manually enables to record music information including titles / Required System OS; Microsoft® Windows® Vista/XP/2000 / Language: ENGLISH, GERMAN, FRENCH 
 Color variations: Silver and Black 
 Drive system: Belt Drive Motor 
 Motor: DC Servo Motor 
 Speed: 33-1/3, 45 rpm 
 Wow & flutter: 0.15 % (WRMS) 
 Tonearm: Type Dynamically Balance type, Straight Tonearm 
 Cartridge: Type MM / Replaceable stylus number DSN-84 / Output Voltage with equalizer OFF 2.5 mV, with equalizer ON 150 mV 
 Digital recording media: USB memory (Mass Storage Class) 
 Digital recording file type: MP3, 192 kbps 
 Power supply: AC 230 V, 50 Hz 
 Power consumption: 12 W 
 Dimensions (WxHxD): Dust cover closed 360 x 98 x 358 mm / Max., Dust cover opened 360 x 415 x 363 mm 
 Weight: 3.2 kg

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

Manual, Drive System belt-drive (flat belt around sub-platter), Speeds 33-1/3, 45 rpm, Tonearm THORENS TP 90, Pick-up Cartridge AT-95 B, Anti-skating (Bias) by magnet, Dimensions 470 x 125 x 430 mm (W x H x D), Weight 4.7 kg, power supply, RCA interconnects, stylus gauge, spirit level, cartridge alignment protractor

Weight7.00 kg9.00 kg5.00 kg4.00 kg3.50 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.00 kg
Weight 9.00 kg
Weight 5.00 kg
Weight 4.00 kg
Weight 3.50 kg
Weight 5.00 kg