Content | 10g dj style 1/2”-mount cartridge headshell
This headshell for 1/2”-mount cartridges and 4-pin turntable arm (Audio-Technica, Technics, SME) features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with colour-coded headshell lead wires and cartridge mounting screws, nuts and washer.
- All metal construction with integral finger lift
- Rubber washer for secure fit to tone arm
- Color coded lead wires and cartridge mounting hardware
- No tilt adjustment
- No overhang adjustment of the headshell on the arm (cartridge overhang adjustment is provided by the two slots on the headshell)
|
Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included. Offering the type of premium quality DJs have long come to expect from ORTOFON, the SH-4 model headshell delivers superior performance and durability and is compatible with all DJ turntables and DJ cartridges on the market.
ORTOFON SH-4 HEADSHELL SPECIFICATIONS:
- ALL METAL CONSTRUCTION
- GOLD PLATED TERMINALS
- INCLUDES MOUNTING SCREWS
- WORKS WITH ANY CARTRIDGE (PERFECT FOR ORTOFON OM SERIES)
- MADE IN JAPAN
|
Pick your colour
Designed for the PLX-1000 and PLX-500, the PC-HS01 headshell comes in black, silver and gold so you can choose the colour that complements your set-up best. Or use the colours to differentiate between your weight, cartridge and stylus preferences; for example, black for scratching, silver for recording, and gold for listening.
The PC-HS01 comes with a 4 gram shell weight, but the headshell also allows you to attach different weights (cartridge and stylus are not included).
Specifications
|
- PC-HS01 includes:
- 2 screws
- 2 washers
- 2 nuts
- 4 gram shell weight
- Product weight: 10 g (11 g, including the supplied accessories)
- Shell length: 52 mm
- Finger length: 21 mm
|
| Technical data
Output voltage at 1 kHz 5 cm/sec 0,45 mV
Channel balance
Channel separation at 1 kHz > 23 dB
Channel separation at 15 kHz > 15 dB
Frequency range at -3 dB 20 Hz - 50 kHz
Frequency response 20 Hz - 20 kHz +3/-1
Tracking ability at 315 Hz at recommended tracking force *) 80 μm
Compliance, dynamic, lateral 12 μm/mN
Stylus type Nude Fine Line on Alu cantilever
Stylus tip radius r/R 8/40
Tracking force range 2,2-2,7 g (22-27 mN)
Tracking force recommended 2,5 g (25 mN)
Tracking angle 20º
Internal impedance, DC resistance 5 Ohm
Recommended load impedance 50-500 Ohm
Cartridge body material Stainless steel Aluminium
Cartridge colour Red/Black
Cartridge weight 10,7 g |
Technical data
Quintet FrontBlack02
Output voltage at 1000 Hz, 5cm/sec. 0.3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 23 dB
Channel separation at 15 kHz > 15 dB
Frequency range at - 3dB 20 - 25.000 Hz
Frequency response 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315Hz at recommended tracking force *) 80 µm
Compliance, dynamic, lateral 15 µm/mN
Stylus type Nude Shibata on Boron cantilever
Stylus tip radius r/R 6/50 µm
Tracking force range 2.1-2.5 g (21-25 mN) Quintet SideBlack01
Tracking force, recommended 2.3 g (23 mN)
Tracking angle 20°
Internal impedance, DC resistance 5 Ohm
Recommended load impedance > 20 Ohm
Cartridge body material ABS/Aluminium
Coil wire material Aucurum
Cartridge colour Black
Cartridge weight 9 g
|
The LH-2000 is a basic high quality headshell designed specifically for hifi use. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges.
|
Reviews
There are no reviews yet.