AUDIO TECHNICA AT-LP120USBHC Black USB Direct drive turntable

AT-LP120-USB Direct-Drive Professional Turntable

USB output—connects directly to your computer for plug-&-play use

Mac- and PC-compatible Audacity software digitizes your LPs

Direct drive high-torque motor

Selectable 33/45/78 RPM speeds

Professional cast aluminum platter with slip mat

Balanced tone arm with soft damping control

Switchable built-in pre-amplifier with line-level RCA output cables

Stroboscopic platter speed indicator

Forward and reverse play

Includes: Direct Drive Professional Stereo USB turntable, AT95E Cartridge, Mac- and PC-compatible Audacity software, USB cable, Adapter cables

• Type: 3-speed, fully manual operation
• Motor: DC motor
• Drive Method Direct Drive: Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation: +/-10% or +/-20%
• Turntable Platter: Die-cast aluminum
• Starting Torque: >1.6 kgf-cm
• Braking System: Electronic brake
• Wow and Flutter: 50 dB
• Output Level Pre-amp: "PHONO“: 2.5 mV nominal at 1 kHz, 5 cm/sec
• Pre-amp "LINE“: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• USB Function: A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable;
• Computer interface - USB 1.1 Compliant Windows XP, Vista or MAC OSX
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Power Consumption: 11W
• Dimensions: 450.0 mm (17.72“) W x 352.0 mm (13.86“) D x 157.0 mm (6.1“) H
• Weight: 10.7 kg (23.5 lbs.)
• Accessories Included: Headshell, AC line cord; dual RCA (female) to 3.5 mm (1/8“) mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8“) mini-plug (female) stereo adapter cable; 45 RPM adapter; USB cable; recording software

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  

The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. 

•  Belt drive system with low vibration DC motor  

•  Central gravity mass point made from artificial stone  

•  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  

•  Low resonance MDF platter with felt mat  

•  8,6” ultra low mass tonearm with straight arm tube  

•  Pre-adjusted tracking force & antiskating  

•  Gold-plated RCA contacts & cartridge pins  

•  Colour options: red-black, white-black, silver-black 

Specifications:

• speed : 33, 45 (manual speed change)

• Speed variance: 33: 0,2% 45: 0,18%

• Wow & flutter: 33: 0,14% 45: 0,13%

• platter: 300mm MDF

• tonearm: 8,6” metal tube

• effective arm length: 218,5 mm

• overhang: 22,0 mm

• effective tonearmmass: 8,0gr

• counterweight for cartridge mass: 3 - 5,5g (included)

• tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)

• output: RCA to phono input

• included accessory: RCA cable, 15V DC power supply

• power consumption: 4,0 watts

• dimensions: 430 x 90 x 300mm (WxHxD)

• weight: 2,7 kg net

•  Belt drive system with low vibration DC motor
•  Central gravity mass point made from artificial stone
•  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
•  Low resonance MDF platter with felt mat
•  8,6” ultra low mass tonearm with straight arm tube
•  Pre-adjusted tracking force & antiskating
•  Gold-plated RCA contacts & cartridge pins
•  Colour options: red-black, white-black, silver-black

• speed : 33, 45 (manual speed change)
• Speed variance: 33: 0,2% 45: 0,18%
• Wow & flutter: 33: 0,14% 45: 0,13%
• platter: 300mm MDF
• tonearm: 8,6” metal tube
• effective arm length: 218,5 mm
• overhang: 22,0 mm
• effective tonearmmass: 8,0gr
• counterweight for cartridge mass: 3 - 5,5g (included)
• tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
• output: RCA to phono input
• included accessory: RCA cable, 15V DC power supply
• power consumption: 4,0 watts
• dimensions: 430 x 90 x 300mm (WxHxD)
• weight: 2,7 kg net

A MUSICAL FAMILY

The TD 206 and TD 209 turntables are the younger siblings of the revolutionary, multiple-award-winning TD 309. However, they don’t have to live in the shadow of their older brother. Both models are built using only high-quality materials and parts. And both share a number of technical features with the TD 309, ensuring that their replay quality is up there with the best.

The new TP 90 tonearm is based on the tried-and-tested TP 92 and uses the same ultra-low-friction, high-performance bearing and the innovative zero-stiction anti-bias system. The arm tube is made from rolled aluminium that is damped using RMR technology (reduced-modal-resonance), and the stainless-steel counterweight at the end of the arm tube is double-decoupled. Tonearm height, azimuth and overhang are useradjustable.

• Low Noise, Low Voltage electronically speed controlled DC Motor
• Adjustable belt tension for best performance
• Two-part aluminium/acrylic platter
• New TP 90 tonearm with precision Japanese bearings
• Tonearm adjustable for VTA, azimuth and overhang
• Made in Germany

Manual, Drive System belt-drive (flat belt around sub-platter), Speeds 33-1/3, 45 rpm, Tonearm THORENS TP 90, Pick-up Cartridge AT-95 B, Anti-skating (Bias) by magnet, Dimensions 470 x 125 x 430 mm (W x H x D), Weight 4.7 kg, power supply, RCA interconnects, stylus gauge, spirit level, cartridge alignment protractor