| Content |
This professional stereo turntable features a high-torque direct-drive motor for quick start-ups and a USB output that connects directly to your computer. Other features include: forward and reverse play capability; cast aluminum platter with slip mat and a start/stop button; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% or +/-20% adjustment ranges; and removable hinged dust cover. A selectable internal stereo phono pre-amplifier allows the turntable to plug directly to components with no dedicated turntable input. A USB cable and adapter cables are included along with Mac- and PC-compatible Audacity software to digitize your LPs. The AT-LP120USBC comes complete with the Audio-Technica AT95E cartridge and is also compatible with all Audio-Technica cartridges and any ½ inch mount cartridge from other manufacturers.
AT-LP120-USB Direct-Drive Professional Turntable
- USB output-connects directly to your computer for plug-&-play use
- Mac- and PC-compatible Audacity software digitizes your LPs
- Direct drive high-torque motor
- Selectable 33/45/78 RPM speeds
- Professional cast aluminum platter with slip mat
- Balanced tone arm with soft damping control
- Switchable built-in pre-amplifier with line-level RCA output cables
- Stroboscopic platter speed indicator
- Forward and reverse play
Includes
- Direct Drive Professional Stereo USB turntable
- AT95E Cartridge
- Mac- and PC-compatible Audacity software
- USB cable
- Adapter cables
System requirements
- PC or Mac with an available USB port (USB1.1 or higher)
- CD-R or CD-RW writer for burning CDs & installation
- Includes Audacity software for PC & Mac users
Audacity requires Mac running OS X 10.1 or later or PC running Windows (98 and above)
*The AT-LP120USBC comes complete with the Audio-Technica AT95E cartridge and is also compatible with all Audio-Technica cartridges and any ½ inch mount cartridge from other manufacturers.
- Type: 3-speed, fully manual operation
- Motor: DC motor
- Drive Method Direct Drive: Direct drive
- Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
- Pitch Variation: +/-10% or +/-20%
- Turntable Platter: Die-cast aluminum
- Starting Torque: >1.6 kgf-cm
- Braking System: Electronic brake
- Wow and Flutter: 50 dB
- Output Level Pre-amp: "PHONO“: 2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE“: 150 mV nominal at 1 kHz, 5 cm/sec - Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
- USB Function: A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable;
Computer interface - USB 1.1 Compliant Windows XP, Vista or MAC OSX - Power Supply Requirements: 115/230V AC, 60/50 Hz
- Power Consumption: 11W
- Dimensions: 450.0 mm (17.72“) W x 352.0 mm (13.86“) D x 157.0 mm (6.1“) H
- Weight: 10.7 kg (23.5 lbs.)
- Accessories Included: Headshell, AC line cord; dual RCA (female) to 3.5 mm (1/8“) mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8“) mini-plug (female) stereo adapter cable; 45 RPM adapter; USB cable; recording software
| Platter of diecast aluminum
Drive belt
Built-in phono equalizer controlled by switch (possible connection to an input-AUX)
Includes MM cartridge
elegant size
MANUAL/ΕΓΧΕΙΡΙΔΙΟ | Audio-Technica AT-LP140XP BL, Direct Drive Turntable, professional turntable, manual, high-performance direct drive motor, anti-resonance / shock mount die-cast aluminium platter, selectable 33/45/78 RPM speeds, S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest, forward / reverse operation and variable pitch control with quartz speed lock, adjustable pitch range: +/-8 %, +/-16 %, +/- 24 %, stroboscopic platter with speed indicator, popup stylus target light, accessories Included: AT-XP3 phono cartridge, AT-HS6 headshell, dual RCA (male) to dual RCA (male) cable with ground wire, counterweight, felt mat, dust cover, 45 RPM adapter, plug-type stylus target light, colour: black
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, mass-damped, die-cast aluminium platter
- Including AT-XP3 cartridge with AT-HS6 universal half inch-mount headshell
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½“-mount headshell.
Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.
Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque servo motor with speed stabilization
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
- AT-HS6 universal ½“-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
- Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
- Dedicated phono-level output (5.5 mV)
- Stroboscopic platter with speed indicator
- Forward/reverse operation and variable pitch control with quartz speed lock
- Retractable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
- Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover.
| Cartridge & Stylus |
| Model |
AT-XP3 |
| Type |
VM Dual Magnet |
| Output Voltage |
5.5 mV (@ 1.0 kHz, 5cm/sec) |
| Vertical Tracking Force Range |
2.0 to 4.0 g (standard 3.0 g) |
| Stylus Shape |
Conical |
| Stylus Size |
0.6 mil |
| Recommended Load Impedance |
47,000 ohms |
| Weight |
6.2 g |
| Headshell |
| Model |
AT-HS6 |
| Weight |
9 g |
| Tone arm |
| Type |
Balanced S-shaped tonearm with detachable headshell |
| Effective Length |
230.5mm |
| Overhang |
16mm |
| Maximum Tracking Error Angle |
Less than 3 degree |
| Applicable Cartridge Weight |
3.5 - 8.5 g |
| Anti-skating Range |
0-4 g |
| Turntable |
| Drive Method |
Direct drive |
| Type |
3-speed, fully manual operation |
| Motor |
High-torque DC motor |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Pitch Variation |
+/-8% or +/-16% or +/-24% |
| Turntable Platter |
Die-cast aluminium |
| Starting Torque |
2.2 kgf-cm |
| Wow and Flutter |
50 dB |
| Output Level |
5.5 mV nominal at 1 kHz, 5 cm/sec |
| Power Supply Requirements |
115/230V AC, 60/50 Hz |
| Power Consumption |
4.3 W |
| Weight |
10.0 kg |
| Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.
The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
- Belt drive system with low vibration DC motor
- Central gravity mass point made from artificial stone
- Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
- Low resonance MDF platter with felt mat
- 8,6” ultra low mass tonearm with straight arm tube
- Pre-adjusted tracking force & antiskating
- Gold-plated RCA contacts & cartridge pins
- Colour options: red-black, white-black, silver-black
Specifications:
- speed : 33, 45 (manual speed change)
- Speed variance: 33: 0,2% 45: 0,18%
- Wow & flutter: 33: 0,14% 45: 0,13%
- platter: 300mm MDF
- tonearm: 8,6” metal tube
- effective arm length: 218,5 mm
- overhang: 22,0 mm
- effective tonearmmass: 8,0gr
- counterweight for cartridge mass: 3 - 5,5g (included)
- tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
- output: RCA to phono input
- included accessory: RCA cable, 15V DC power supply
- power consumption: 4,0 watts
- dimensions: 430 x 90 x 300mm (WxHxD)
- weight: 2,7 kg net
|
A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.
The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.
Specifications:
-
speed : 33, 45 (manual speed change)
-
principle : belt drive
-
Speed variance : 33: 0,14% 45: 0,25%
-
Wow & flutter : 0,12%
-
platter : 300mm MDF with felt mat (0,8kg)
-
main bearing : stainless steel
-
tonearm : 8,6” aluminium
-
effective : arm length 218,5 mm
-
overhang : 22,0mm
-
effective tonearmmass : 8,0gr
-
counterweight for mass : 3 - 5,5g (included)
-
tracking force range : 0 - 25mn (OM5 18mn recommended)
-
included accessory : power supply, dust cover
-
Power consumption : 4,5 watts
-
dimensions : 420 x 112 x 330mm (WxHxD)
-
weight : 4,0 kg net
|
A MUSICAL FAMILY
The TD 206 and TD 209 turntables are the younger siblings of the revolutionary, multiple-award-winning TD 309. However, they don’t have to live in the shadow of their older brother. Both models are built using only high-quality materials and parts. And both share a number of technical features with the TD 309, ensuring that their replay quality is up there with the best.
The new TP 90 tonearm is based on the tried-and-tested TP 92 and uses the same ultra-low-friction, high-performance bearing and the innovative zero-stiction anti-bias system. The arm tube is made from rolled aluminium that is damped using RMR technology (reduced-modal-resonance), and the stainless-steel counterweight at the end of the arm tube is double-decoupled. Tonearm height, azimuth and overhang are useradjustable.
SPECIAL FEATURES
- Low Noise, Low Voltage electronically speed controlled DC Motor
- Adjustable belt tension for best performance
- Two-part aluminium/acrylic platter
- New TP 90 tonearm with precision Japanese bearings
- Tonearm adjustable for VTA, azimuth and overhang
- Made in Germany
|
Reviews
There are no reviews yet.