AUDIO TECHNICA AT-LP60XUSB Turntable with build-in digital recorder, USB, Color: Black

219.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: ATLP60XUSBBK Categories:
Fully Automatic Belt-Drive Turntable (Analog & USB) with integrated digital recording system Type: Automatic & Manual with belt drive (Belt drive) Mechanical Lift ascent / descent arm Turntable Platter Aluminium Motor DC servo-controlled, Speeds 33-1/3 RPM, 45 RPM Integral Dual Magnet™ phono cartridge with replaceable diamond stylus ΑΤ-3600L USB output that allows direct connection to computer […]

 

Read more

Fully Automatic Belt-Drive Turntable (Analog & USB) with integrated digital recording system Type: Automatic & Manual with belt drive (Belt drive) Mechanical Lift ascent / descent arm

Turntable Platter Aluminium

Motor DC servo-controlled, Speeds 33-1/3 RPM, 45 RPM Integral Dual Magnet™ phono cartridge with replaceable diamond stylus ΑΤ-3600L

USB output that allows direct connection to computer

Built-in switchable phono pre-amplifier for phono- or line-level output

Drive Method Belt-drive
Type fully automatic
Motor DC servo-controlled
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Aluminium
Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio >50 dB (DIN-B)
Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above
Power Supply Requirements 115/230V AC, 60/50 Hz
Power Consumption 1 W
Dimensions 359.5 mm x 97.5 mm x 373.3 mm
Weight 2.6 kg
Accessories Included 3.5 mm (1/8“) mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2\’) USB cable
Weight 2.80 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA AT-LP60XUSB Turntable with build-in digital recorder, USB, Color: Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA AT-LP60XUSB Turntable with build-in digital recorder, USB, Color: Black removeDENON DP-300F Belt-driven automatic turntable with cartridge removePro-Ject Debut Carbon DC OM10 Turntable Black Piano removePro-Ject Essential II with phono USB Turntable Black removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Walnut) removePro-Ject Debut Carbon DC OM10 Turntable Blue remove
NameAUDIO TECHNICA AT-LP60XUSB Turntable with build-in digital recorder, USB, Color: Black removeDENON DP-300F Belt-driven automatic turntable with cartridge removePro-Ject Debut Carbon DC OM10 Turntable Black Piano removePro-Ject Essential II with phono USB Turntable Black removeTHORENS TD 240-2 Belt drive Turntable 78rpm (Walnut) removePro-Ject Debut Carbon DC OM10 Turntable Blue remove
ImageDENON DP-300F Belt-driven automatic turntable with cartridge
SKUATLP60XUSBBKDP-300FDCOM10BESIIUSBBTD 240-2 WalnutDCOM10BL
Rating
Price 219.00 incl. GR VAT 369.00 incl. GR VAT449.00 incl. GR VAT 384.39 incl. GR VAT910.00 incl. GR VAT449.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

Only 1 left in stock

Available on backorder

In stock

AvailabilityOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stockOnly 1 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentFully Automatic Belt-Drive Turntable (Analog & USB) with integrated digital recording system Type: Automatic & Manual with belt drive (Belt drive) Mechanical Lift ascent / descent arm Turntable Platter Aluminium Motor DC servo-controlled, Speeds 33-1/3 RPM, 45 RPM Integral Dual Magnet™ phono cartridge with replaceable diamond stylus ΑΤ-3600L USB output that allows direct connection to computer Built-in switchable phono pre-amplifier for phono- or line-level output
Drive Method Belt-drive
Type fully automatic
Motor DC servo-controlled
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Aluminium
Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio >50 dB (DIN-B)
Output Level Pre-amp "PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above
Power Supply Requirements 115/230V AC, 60/50 Hz
Power Consumption 1 W
Dimensions 359.5 mm x 97.5 mm x 373.3 mm
Weight 2.6 kg
Accessories Included 3.5 mm (1/8“) mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2\') USB cable
DENON DP-300F Belt-driven automatic turntable with cartridge Fully automatic operation makes the DP-300F easy to use. With the touch of a button, the tonearm swings over and begins playing your record, returning to its original position when finished. Details: aluminum platter built-in phono preamp belt-drive system with DC servo motor dynamic balance tonearm with universal mount fully automatic operation manual lifter mechanism replaceable moving magnet cartridge included removable dust cover heavy base construction minor assembly required two speeds: 33-1/3 rpm & 45 rpm wow & flutter 0.10% weight: 6 kgs dimensions:17-1/16“W x 4-13/16“H x 15“D

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

  •  8,6” carbon tonearm  

  •  Increased platter size with more weight  

  •  Precision belt drive with synchronous motor  

  •  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

  •  New TPE motor suspension  

  •  Felt mat  

  •  magnetic cartridge options from Ortofon OM 10 or 2M red  

  •  7 high-gloss colours

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240-2 with a timeless elegance.

This record player has been equipped with the new TP 19-1 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes

Specs:

  • Operation fully automatic
  • Drive System internal flat drive belt
  • Motor electronically controlled DC motor
  • Speeds 33-1/3, 45, 78 rpm
  • Speed Select electronically
  • Platter 12” / 0.7 kg (aluminium, non-magnetic)
  • Tonearm THORENS® TP 19-1
  • Pick-up Cartridge THORENS® TAS 267
  • Anti-skating (Bias) by spring (adjustable)
  • Automatic Shut-off mechanically
  • Cable Capacitance 160 pF
  • Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
  • Dimensions 430 x 130 x 365 mm (W x H x D)
  • Weight 6.4 kg
  • Finish solid wooden plinth with black piano laquer, black structured enamel,
  • Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

  •  8,6” carbon tonearm  

  •  Increased platter size with more weight  

  •  Precision belt drive with synchronous motor  

  •  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

  •  New TPE motor suspension  

  •  Felt mat  

  •  magnetic cartridge options from Ortofon OM 10 or 2M red  

  •  7 high-gloss colours

Weight2.80 kg6.00 kg6.50 kg5.00 kg8.50 kg6.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.80 kg
Weight 6.00 kg
Weight 6.50 kg
Weight 5.00 kg
Weight 8.50 kg
Weight 6.50 kg