AUDIO TECHNICA AT-LP60XUSB Turntable with build-in digital recorder, USB, Color: Black

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

•  8,6” carbon tonearm  

•  Increased platter size with more weight  

•  Precision belt drive with synchronous motor  

•  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

•  New TPE motor suspension  

•  Felt mat  

•  magnetic cartridge options from Ortofon OM 10 or 2M red  

•  7 high-gloss colours

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

•  8,6” carbon tonearm  

•  Increased platter size with more weight  

•  Precision belt drive with synchronous motor  

•  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

•  New TPE motor suspension  

•  Felt mat  

•  magnetic cartridge options from Ortofon OM 10 or 2M red  

•  7 high-gloss colours