| Content | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
|
- Professional hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High ambient noise attenuation
- For broadcast and DJ use
- Rugged construction for tough handling
- Leatherette ear pads and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed K 171 MK II combines the benefits of a closed-back design with the lightweight and comfort of supra-aural headphones.
The K 171 MK II is an excellent choice for DJ and broadcast applications where no sound can bleed from the headphones into live microphones.
The closed-back, loud and rugged design gives the K 171 MK II a different low-frequency character and maintains its comfort and flexibility.
| Type | closed-back, dynamic headphones | | Sensitivity | 94 dB/mW, 107 dB/V | | Frequency range | 18 to 26,000 Hz | | Rated impedance | 55 ohms | | Max. input power | 200 mW | | Earpads | leatherette and velvet | | Cable | 3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) | | Connector | gold plated stereo mini jack | | Adapter | gold plated 1/8" to 1/4" screw-on adapter | | Net weight (without cable) | 200 g (7.1 oz.) | | Shipping weight | 500 g (17.6 oz.) | | Patent(s) | Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| Whether you\'re mixing, monitoring or just enjoying an MP3, you want your headphones to deliver a wide frequency response and high dynamic range. The HPS3000 headphones provide incredible performance for a price well within any budget
The HPS3000 provides everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution cobalt capsules that deliver every nuance of your sound. The one-sided cable is engineered from the finest oxygen-free copper wire that resists tangling and provides maximum durability. It also comes with a 1/4" TRS adapter for the 1/8" TRS connector, making it compatible with everything from your MP3 player to your mixing console.
FEATURES
- Ultra-wide frequency response
- High-definition bass and super-transparent highs
- Ultra-wide dynamic range
- High-efficiency cobalt capsule
- 1/8" Connector plus 1/4" adapter included
- Single-sided cord with oxygen-free copper wires
- Optimized oval-shaped ear cups
SPECIFICATIONS
HPS3000 High-Performance Studio Headphones
- Capsule diameter: 40 mm
- Frequency response: 20Hz-20kHz
- Max. power handling: 100 mW
- Impedance: 64 Ohm
- Sensitivity: 110dB@1kHz
- Cord length: 2.0 m
- Connector: 1/8" TRS connector plus 1/4" TRS adapter
| DT770 Closed reference headphone for control and monitoring applications (optionally with limiter).
The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time.
▲ Closed, diffuse-field studio headphone
▲ "Bass reflex" technology for improved bass response
▲ Comfortable fit due to rugged, adjustable, soft padded headband construction
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Single-sided cable
▲ NEW - Limiter (Optional)
▲ Velour, circumaural ear pads
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
250 ohms |
| Headphone frequency response |
|
5 - 35.000 Hz |
| Nominal sound pressure level |
|
96 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
270 g |
|
Reviews
There are no reviews yet.