Content | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
By the way, the K 271 MK II is also available as a headset with dynamic microphone (HSD 271) or condenser microphone (HSC 271).
| With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 22,000 Hz
- Max Input Power: 1,300 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 7.8 oz (220 g)
- Cable - Detachable: No
- Cable: 3 m (9.84') Straight cable, left-side exit
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
|
Transmission Type: Wired
Headphone frequency response: 10 - 30.000 Hz
Nominal sound pressure level: 100 dB SPL
Sound coupling to the ear: Circumaural (around the ear)
Cable & Plug: Detachable cable – various connectors available
Polar Pattern For Microphone: Hypercardioid
Transducer type for microphone: Dynamic - Hypercardioid
| The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
- Cutting-edge engineering and robust construction
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned flat for incredibly accurate sound monitoring across the entire frequency range
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- 90° swiveling earcups for easy, one-ear monitoring
- Professional-grade earpad and headband material delivers more durability and comfort
- Detachable cable (2 cables included)
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 24,000 Hz
- Max Input Power: 1,600 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 35 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 8.5 oz (240 g)
- Cable - Detachable: Yes
- Cable Includes: 1.2m-3m coiled, 3m straight cablesConnector Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
| DT770 Closed reference headphone for control and monitoring applications (optionally with limiter).
The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time.
▲ Closed, diffuse-field studio headphone
▲ "Bass reflex" technology for improved bass response
▲ Comfortable fit due to rugged, adjustable, soft padded headband construction
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Single-sided cable
▲ NEW - Limiter (Optional)
▲ Velour, circumaural ear pads
Transmission type |
|
Wired |
Headphone design (operating principle) |
|
Closed |
Headphone impedance |
|
250 ohms |
Headphone frequency response |
|
5 - 35.000 Hz |
Nominal sound pressure level |
|
96 dB |
Construction |
|
Circumaural (around the ear) |
Cable & plug |
|
Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
Net weight without packaging |
|
270 g |
|
Reviews
There are no reviews yet.