| Content | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
By the way, the K 271 MK II is also available as a headset with dynamic microphone (HSD 271) or condenser microphone (HSC 271).
| 80 Ohm specs
- Type Over-ear (Closed)
- Channels Stereo
- Noise isolation 18 dB reduction
- Connections 3.5mm stereo, 6.25mm stereo
- Weight 9.52 oz
General
- Type Over-ear (Closed)
- Cable type Y-cable
- Channels Stereo
Other features
- Plug type Straight
- Gold-plated connector Yes
Audio quality
Noise reduction
- Noise isolation 18 dB reduction
Connections
- Connections 3.5mm stereo, 6.25mm stereo
| The SRH1840 Professional Open Back Headphones feature individually matched drivers for unparalleled acoustic performance, including smooth, extended highs and accurate bass. Developed with premium materials and precision engineering, the custom-crafted design is extremely lightweight and durable. Ideal for mastering or critical listening applications.
The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.
Individually matched 40 mm neodymium drivers for unparalleled acoustic performance with smooth, extended highs and accurate bass
Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field
Lightweight construction featuring aircraft-grade aluminum alloy yoke and stainless steel grilles for enhanced durability
Steel driver frame with vented center pole piece improves linearity and eliminates internal resonance for consistent performance at all listening levels
Ergonomic dual-frame, padded headband is lightweight and fully adjustable for hours of listening comfort
Optimized for connection to external headphone amplification systems
Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability
Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement
Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort
Individually tested and serialized
Legendary Shure durability to withstand the rigors of everyday use
Type
Open-back, circumaural
Sensitivity
96 dB SPL/mW
Maximum Input Power
1000 mW
Frequency Range
10 Hz – 30 kHz
Weight
0.59 lbs (268 g)
Cable Style
Dual-exit, detachable oxygen-free copper
Cable Length
6.9 ft (2.1 m)
Plug
Gold-plated 1/8" (3.5 mm) stereo mini-jack |
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
| Type |
closed-back, dynamic headphones |
| Sensitivity |
91 dB/mW, 104 dB/V |
| Frequency range |
16 to 28,000 Hz |
| Rated impedance |
55 ohms |
| Max. input power |
200 mW |
| Earpads |
leatherette und velvet |
| Cable |
3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) |
| Connector |
gold plated stereo mini jack |
| Adapter |
gold plated 1/8" to 1/4" screw-on adapter |
| Net weight (without cable) |
240 g (8.5 oz.) |
| Shipping weight |
550 g (19.4 oz.) |
| Patent(s) |
Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
|
Reviews
There are no reviews yet.