Content |
Type | Closed-back dynamic | Driver Diameter | 40 mm | Magnet | Neodymium | Voice Coil | Copper-clad aluminum wire | Frequency Response | 5 - 28,000 Hz | Maximum Input Power | 1,600 mW at 1 kHz | Sensitivity | 100 dB | Impedance | 60 ohms | Weight | 8.8 oz (250 g) without cable | Cable | 11' (3.4 m) (OFC litz wire, left-side exit) | Connector | 1/4" (6.3 mm) phone plug |
|
HSD 171 without cable
Professional headset with hypercardioid, shock mounted, speech optimized, dynamic microphone. Main application: Live sound use. The microphone?s frequency range is 60-17,000 Hz with a sensitivity of 1 mV/Pa (-60 dBV). Impedance is 600 ohms. The headphone?s impedance is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back with self-adjusting headband. Microphone arm is swivelling through 270 degrees for left or right-hand use with integrated mute switch. Net/shipping weight: 255/725g (9/25.4 oz.) | DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
Transmission type |
|
Wired |
Headphone design (operating principle) |
|
Closed |
Headphone impedance |
|
80 ohms |
Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
Construction |
|
Circumaural (around the ear) |
Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
Net weight without packaging |
|
300 g |
| Beyerdynamic DT 150
The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios
and other audio monitoring applications where size, comfort and performance are primarily requirements.
Due to its closed design it features excellent ambient noise isolation for reference monitoring.
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 5 - 30,000 Hz
- Nominal impedance: 250 Ω
- Nominal SPL: 97 dB
- Power handling capacity: 100 mW
- Sound coupling to the ear: Circumaural
- Headband pressure: 4.5 N
- Ambient noise attenuation: approx. 20 dBA
- Weight (without cable): 250 g
|
The SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass in a sleek, attractive design. Made for mastering and critical listening, the premium padded headband with steel frame offers hours of listening comfort. The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment. 40 mm Neodymium drivers deliver full-range audio with rich, controlled bass Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field Impedance optimized for direct connection to wide range of portable audio devices Fully adjustable, premium padded headband with steel frame and sleek, ergonomic design for hours of listening comfort Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort Individually tested and serialized Legendary Shure durability to withstand the rigors of everyday use Type Open-back, circumaural Frequency Range 15 Hz – 27 kHz Cable Length 6.9 ft (2.1 m) Plug Gold-plated 1/8" (3.5 mm) stereo mini-jack User's Manual
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
|
Reviews
There are no reviews yet.