Content |
Type | Closed-back dynamic | Driver Diameter | 40 mm | Magnet | Neodymium | Voice Coil | Copper-clad aluminum wire | Frequency Response | 5 - 28,000 Hz | Maximum Input Power | 1,600 mW at 1 kHz | Sensitivity | 100 dB | Impedance | 60 ohms | Weight | 8.8 oz (250 g) without cable | Cable | 11' (3.4 m) (OFC litz wire, left-side exit) | Connector | 1/4" (6.3 mm) phone plug |
|
Designed for professional audio engineers and in-studio talent, SRH940 Headphones from Shure deliver accurate response across the entire audio spectrum for smooth high-end extension with tight bass. Superior transient response provides minimal distortion. The collapsible, lightweight design with premium padded headband offers superior comfort and portability. Two included detachable cables (straight and coiled) and a replacement set of velour ear pads ensure a long product life. Also includes a hard zippered travel case and a threaded 1/4" (6.3) mm gold-plated adapter. Accurate frequency response delivers smooth high-end extension with tight bass, and superior transient response for minimal distortion Lightweight, ergonomic fit with premium padded headband provide maximum comfort over extended periods Closed-back, circumaural design rests comfortably over the ears and reduces background noise Collapsible design with 90-degree swivel ear cups for convenient storage and portability Legendary Shure quality to withstand the rigors of everyday use Bayonet Clip securely locks cable into ear cup Replaceable velour ear pads included to ensure long product life and maximum comfort Two included detachable cables (coiled & straight) provide flexible wearing options and easy replacement Zippered hard travel case protects headphones when on the go or not in use Sensitivity 100 dB/mW lmpedance 42 Ω Frequency Range 5 Hz - 30 kHz Weight 11 oz (320 g) Cable Length Coiled: 9.84 ft (3 meters), detachable Straight: 8.2 ft (2.5 meters), detachable Cable Style Detachable oxygen-free copper Plug Gold-plated 1/8" (3.5 mm) stereo mini jack
Ultra-wide frequency response
High-definition bass and super-transparent highs
Ultra-wide dynamic range
High-efficiency cobalt capsule
1/8" Connector plus 1/4" adapter included
Single-sided cord with oxygen-free copper wires
Optimized oval-shaped ear cups
SPECIFICATIONS
HPS3000 High-Performance Studio Headphones
- Capsule diameter: 40 mm
- Frequency response: 20Hz-20kHz
- Max. power handling: 100 mW
- Impedance: 64 Ohm
- Sensitivity: 110dB@1kHz
- Cord length: 2.0 m
- Connector: 1/8" TRS connector plus 1/4" TRS adapter
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
Driver Size |
1.6" / 40 mm |
Driver Type |
Dynamic |
Magnet Type |
Cobalt |
Design |
Over-Ear (Circumaural) |
Earcup Style |
Closed-Back |
General
Frequency Response |
20 Hz to 20 kHz |
Sensitivity |
113.5 dB at 1 kHz |
Impedance |
32 Ohms |
Maximum Power Handling |
100 mW |
Connectivity
Audio Connector to Source |
1/8" / 3.5 mm |
Adapter (Included) |
1/4“ |
Cable
Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
|
Reviews
There are no reviews yet.