Content |
The industry standard for affordable instrument microphones, the MB 2k features a unidirectional dynamic element design for outstanding off-axis rejection and feedback control. Its frequency response is tailored for optimal instrument pickup. This rugged, all-metal mic is equipped Audio-Technica's Hi-ENERGY® neodymium magnet structure for maximum output and fast transient response, with noise-reducing soft-touch finish, MagnaLock™ switch design for silent on/off operation, and a corrosion-resistant gold-plated XLRM-type connector.
Smart-priced introductory microphone for amplified and acoustic instruments
Tailored frequency response for optimal instrument reproduction
Unidirectional dynamic element design
Rugged all-metal construction
Hi-ENERGY® neodymium magnet for improved output and transient response
Soft-touch finish reduces mechanical noise
Silent on-off operation thanks to MagnaLock™ switch design
Corrosion-resistant gold-plated XLRM-type connector
Element: Neodymium Dynamic
Polar Pattern: Unidirectional
Frequency Response: 60-14,000 Hz
Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa
Impedance: 600 ohms
Switch: MagnaLock™ on/off
Weight: 11.9 oz (337 g)
Dimensions: 7.23" (183.6 mm) long, 1.63" (41.4 mm) head diameter
Output Connector: Integral 3-pin gold-plated XLRM-type
Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
|
Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.
The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.
The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.
Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.
The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).
Features:
- Identical acoustics of the legendary CK 1.
- Rugged construction.
- Ruler-flat on-axis frequency response.
- Precise, nearly frequency independent cardioid.
- Extremely accurate signal transfer.
- Transformerless output stage for minimum distortion at low frequencies.
- Protected against electrostatic and magnetic interference.
- Selectable 10-dB and 20-dB preattenuation pads.
- Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
- Operates on phantom power to DIN/IEC between 12 V and 48 V.
- Complete with SA 40 stand adapter and W 90 windscreen.
- Each microphone comes with its own individual frequency response plot.
Specifications:
- Polar pattern: Cardioid
- Frequency range: 20 to 20,000 Hz
- Sensitivity: 9 mV/Pa (-41 dBV)
- Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
- Equivalent noise level (CCIR 468-3): 29 dB
- Equivalent noise level: 18 dB-A
- Signal/noise ratio (A-weighted): 76 dB
- Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
- Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
- Impedance: 1000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN 45596
- Current consumption:
|
- Especially for tom and snare recording
- Polar pattern: cardioid
- Frequency range: 40 - 18,000 Hz
- Impedance: 350 Ω
- Robust metal chassis
- Incl. special tom holder
- Bag included
- Dimensions: 63 x 41 mm
- Weight: 125 g
|
The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...18000 Hz
Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 128,5 x 60 mm
Weight 440 g
|
A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.
Other features include:
- Mew A98D flexible drum mount
- SPL handling to 160dB
- frequency response of 20 to 20,000Hz and included preamplifier
- shock mount and windscreen
|
OVERVIEW
Cardioid dynamic kick drum mic with swivel mount and cable.
The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.
Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning.
FEATURES
- Mountable microphone featuring swivel joint with quick-release latch for kick drum
- Dynamic cartridge (does not require phantom power) with cardioid polar pattern
- Tailored cartridge design for low-frequency clarity, including on bass amps
- Includes PGA52, zipper pouch and user guide
- XLR to XLR mic cable included
|
Reviews
There are no reviews yet.