| Content | The Midnight Blues Series standout performance microphone, the MB 3k dynamic vocal microphone has an extended frequency response specifically developed to capture lead, backup, and choral vocals. Truly a standout in its class, the MB 3k is tuned to make an impact: high volumes come through without distortion - and even subtle nuances are clean and precise. Its Hi-ENERGY® neodymium magnet structure provides improved output and extremely fast transient response. Other features include Audio-Technica's MagnaLock silent switch, soft-touch finish, and gold-plated XLRM connector.
Standout performance microphone for lead, back-up and choral vocals
Extended frequency response for optimal vocal reproduction
Unidirectional dynamic element design
Rugged all-metal construction
Hi-ENERGY® neodymium magnet for improved output and transient response
Soft-touch finish for a secure, comfortable grip
Silent on-off operation thanks to MagnaLock™ switch design
Corrosion-resistant gold-plated XLRM-type connector
Element: Neodymium Dynamic
Polar Pattern: Unidirectional
Frequency Response: 60-14,000 Hz
Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa
Impedance: 600 ohms
Switch: MagnaLock™ on/off
Weight: 12.1 oz (343 g)
Dimensions: 7.56" (192 mm) long, 2.12" (53.8 mm) head diameter
Output Connector: Integral 3-pin gold-plated XLRM-type
Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch |
The E-845S is a high-performance super-cardioid lead vocal microphone with an extended high-frequency response, specially designed for stage use.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 46 x 185 mm
Weight : w/o cable 330 g
|
|
|
|
| Pick Up Pattern |
Cardioid |
| Frequency Response |
30 - 17,000 Hz |
| Sensitivity |
2 mV/Pa +/- 3 dB |
| Nominal Impedance |
200 ohms |
| Min Terminating Impedance |
200 ohms |
| Dimensions |
8.375" x 1.875" x 2" |
| Weight |
Approx. 14 oz (385 g) |
|
|
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Supercardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
80 Hz |
Performance
| Frequency Range |
70 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL |
| Impedance |
600 Ohms |
| Load Impedance |
2000 Ohms |
| Sensitivity |
2.6 mV/Pa |
| Signal-to-Noise Ratio |
76 dB A-Weighted |
| Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
| Weight |
11.29 oz / 320 g |
| Behringer Ultravoice XM8500 Dynamic Cardioid Microphone
With the BEHRINGER vocal microphone ULTRAVOICE XM8500, your voice will shine in a way it never has before, giving a powerful edge to your performances. Your creative energy and highly professional demands finally have a worthy partner. You want your voice to come across at its best, capturing your audience with its power and expression. No problem: with the ULTRAVOICE XM8500, you've got them in your hands.
Bringing out the subtlest nuances and placing them properly in the mix: that's what a good vocal microphone is all about. And that's exactly what the ULTRAVOICE does. Its cardioid characteristic picks up sound from the front with the utmost sensitivity, while strongly dampening sound from the back. This gives you more security against feedback. The integrated shock-mount system effectively reduces handling noise to an absolute minimum. The XM8500's balanced low-impedance output lets you connect it to any console or microphone preamp - provided it has enough dynamic headroom. You'll need plenty of that: the ULTRAVOICE is so powerful that you'll put your current favorite microphone in its box. Even if it cost ten times as much.
On stage, dependability counts. The ULTRAVOICE won't let you down. Its rugged construction protects it against the toughest changes you can put it through. The matte anodized surface reduces reflections from studio or stage lighting. The two-stage pop filter and tough steel mesh keep breath and pop noises out of the signal.
Dynamic vocal microphone with smooth mid-frequency presence rise for excellent vocal projection Internal shock mount system to cut down handling noise Cardioid characteristic minimizes background noise and feedback Ultra-low distortion for a super clean sound Microphone stand adapter included Ultra-professional dynamic vocal microphone 50 Hz - 15 kHz frequency response for crystal-clear, highly detailed vocals Super rugged, reliable metal construction and electromagnetic shielding High-level balanced output Two-stage pop filter minimizes breath and pop noises Sensitivity - 70 dB
| Transducer |
Dynamic |
| Polar Pattern |
Cardioid |
| Frequency Response |
50 Hz to 15 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms |
| Output Connectors |
Gold-Plated Pin XLR-3M Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
8.47 oz. (240 g) |
|
The UNlDYNE? III Model 545SD is a dual-impedance, unidrectional, dynamic microphone. Shipped connected for low-impedance operation, it features a silent magnetic reed on/off switch.
The 545SD is a favorite for instrument pickup and recording, and can be used on lecterns for public address systems such as those used in political conventions and legislatures, convention halls, hotels, public auditoriums, stadiums, schools, and churches.
- Exceptionally uniform cardioid pattern minimizes feedback in PA applications
- Selectable dual-impedance operation
- Silent magnetic reed on/off switch with lock-on option
- Cardioid dynamic
- Frequency response: 50 to 15,000 Hz.
|
Reviews
There are no reviews yet.