Audio Technica MB4k Cardioid condenser microphone

116.93 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: MB4k Category:
A price/performance leader, the MB 4k cardioid condenser microphone is the Midnight Blues Series’ introductory studio-quality microphone. With a condenser design for studio vocal and instrument applications, the microphone features: battery/phantom operation; rugged all-metal construction; soft-touch finish; extended response for smooth, natural sonic characteristics; corrosion-resistant contacts from gold-plated XLRM-type connector; on/off switch. Introductory studio-quality microphone […]

 

Read more

A price/performance leader, the MB 4k cardioid condenser microphone is the Midnight Blues Series’ introductory studio-quality microphone. With a condenser design for studio vocal and instrument applications, the microphone features: battery/phantom operation; rugged all-metal construction; soft-touch finish; extended response for smooth, natural sonic characteristics; corrosion-resistant contacts from gold-plated XLRM-type connector; on/off switch.

  • Introductory studio-quality microphone – the clear price/performance leader
  • Condenser design for studio-quality vocal and instrument applications
  • Extended response for smooth, natural sonic characteristics
  • Rugged all-metal construction and on/off switch
  • Soft-touch finish for a secure, comfortable grip and reduced mechanical noise
  • Battery/phantom operation for maximum versatility
  • Corrosion-resistant gold-plated XLRM-type connector

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 80-20,000 Hz
  • Open Circuit Sensitivity: Phantom: -46 dB (5.0 mV) re 1V at 1 Pa Battery: -48 dB (3.9 mV) re 1V at 1 Pa
  • Impedance: Phantom: 200 ohms Battery: 250 ohms
  • Maximum Input Sound Level: Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Battery: 125 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 113 dB, 1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current Life: 0.4 mA/1200 hours typical
  • Switch: On/off
  • Weight: 6.4 oz (182 g)
  • Dimensions: 8.10″ (205.7 mm) long, 1.64″ (41.7 mm) head diameter
  • Output Connector: Integral 3-pin gold-plated XLRM-type
  • Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; battery; soft protective pouch

 

Weight 0.33 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica MB4k Cardioid condenser microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica MB4k Cardioid condenser microphone removeFOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE removeAKG C 430 - Cardioid Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life remove
NameAudio Technica MB4k Cardioid condenser microphone removeFOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE removeAKG C 430 - Cardioid Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life remove
ImageAKG C 430 condenser microphone
SKUMB4kMC10STC 568BC 430H10SE00022H11RD00016
Rating
Price 116.93 incl. GR VAT 181.99 incl. GR VAT 414.00 incl. GR VAT 156.00 incl. GR VAT 265.00 incl. GR VAT 179.00 incl. GR VAT
Stock

In stock

In stock

In stock

Only 1 left in stock (can be backordered)

In stock

In stock

AvailabilityIn stockIn stockIn stockOnly 1 left in stock (can be backordered)In stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

A price/performance leader, the MB 4k cardioid condenser microphone is the Midnight Blues Series' introductory studio-quality microphone. With a condenser design for studio vocal and instrument applications, the microphone features: battery/phantom operation; rugged all-metal construction; soft-touch finish; extended response for smooth, natural sonic characteristics; corrosion-resistant contacts from gold-plated XLRM-type connector; on/off switch.

  • Introductory studio-quality microphone - the clear price/performance leader
  • Condenser design for studio-quality vocal and instrument applications
  • Extended response for smooth, natural sonic characteristics
  • Rugged all-metal construction and on/off switch
  • Soft-touch finish for a secure, comfortable grip and reduced mechanical noise
  • Battery/phantom operation for maximum versatility
  • Corrosion-resistant gold-plated XLRM-type connector

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 80-20,000 Hz
  • Open Circuit Sensitivity: Phantom: -46 dB (5.0 mV) re 1V at 1 Pa Battery: -48 dB (3.9 mV) re 1V at 1 Pa
  • Impedance: Phantom: 200 ohms Battery: 250 ohms
  • Maximum Input Sound Level: Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Battery: 125 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 113 dB, 1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current Life: 0.4 mA/1200 hours typical
  • Switch: On/off
  • Weight: 6.4 oz (182 g)
  • Dimensions: 8.10" (205.7 mm) long, 1.64" (41.7 mm) head diameter
  • Output Connector: Integral 3-pin gold-plated XLRM-type
  • Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; battery; soft protective pouch

 

8 Wide frequency response range
High sensitivity, Low distortion
High input withstand S.P.L.
Rugged brass case, Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
 
PREMLIMINARY INFORMATION.
The MC10ST is a stereo microphone set including a pair of cardioid electret condenser microphones,
shock mount adapters, stereo mounting bracket and wind screens. The MC10ST can be used in a
wide range of applications, from studio and home recording to field or location sound aquisition.

Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
Dedicated carry case as standard
 
SPECIFICATIONS:
Type: Back Electret Condenser Microphone
Polar Pattern: Cardioid
Frequency Response: 40Hz to 20kHz +/-10dB
Sensitivity: -40dBV/pa (10mv/pa)
Rated Impedance: 200ohm
Equivalent Noise Level: 22dB (A weighted IEC/DIN 651)
Maximum SPL: 134dB (THD

C 568 B 

Compact, short shotgun microphone
Integrated, switchable bass cut filter minimizes mechanical noise
Operates on phantom power
 
High directivity and wide frequency response in a relatively short shotgun make this
microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount
applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz
the acoustic interference tube introduces increasing directivity. A switchable 12 dB/
octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged,
all-metal body contains the built-in preamp. Phantom powering (9?52 V) required; foam
windscreen and stand adapter included.
 
SPECIFICATIONS:
Polar pattern hypercardioid/directional
Frequency range 20 to 20,000 Hz
Sensitivity 11 mV/Pa (-39 dBV)
Max. SPL 128 dB
Equivalent noise level (CCIR 468-3) 29 dB
Equivalent noise level 18 dB-A
Signal/noise ratio 76 dB
Bass filter 12 dB/octave at 120 Hz
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption

Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power. Specifications Polar Pattern: cardioid Frequency Response: 20?20.000 Hz Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa Max. SPL for 1% / 3% THD: 126/130 dB SPL Equivalent Noise Level: 33 dB to DIN 45 412 Electrical Impedance: 200 ohms Recommended Load Impedance: >2.000 ohms Power Requirement: 9 to 52 volts universal phantom power Current Consumption: approx. 2 mA Connector : 3-pin XLR Cable Length: 1.5 m (5 ft.) Finish: matte black Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.) Net / Shipping Weight: 23/192 g (0.8/6,8 oz.) Optional Accessorires: B15, B18

The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g

The R?DE NT6 is specifically designed for difficult mounting applications. Although
clearly relevant to instrument mic'ing, the new NT6 is extremely well suited to any
situation where a small 'unobtrusive' but powerful microphone system is required.
The NT6 utilises the 1/2" (externally biased) gold sputtered true condenser transducer
used in the internationally renowned R?DE NT5. The capsule is designed to attach to
a custom made, multi-position swivel mount allowing it to be independently positioned
with ease.
To further increase the versatility of the NT6, it is supplied with 2 thread adaptors - 1/4"
to 5/8" and 1/4" to 3/8" that enable the capsule assembly to be securely attached to a
wide variety of mic stands, tripods and boom poles.
The capsule is connected to the pre-amplifier (body) by a custom 3 m Kevlar? fibre reinforced
cable. Housed within the heavy duty satin-nickel-plated body, is a state-of-the-art low noise
balanced output preamplifier, exhibiting a wide dynamic range and full frequency response.
The surface-mount pre-amplifier circuit also incorporates a 2-position variable pad: 0 dB an -10 dB
attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response
to 80 Hz high pass filter; both conveniently located away from the capsule, providing additional
control without the need to move the capsule once in position.
The NT6 is intended for Film, Television, Broadcast, Live Performance, Theatre, Television,
Surround and Environmental recording applications or wherever your imagination takes you.
The NT6 is produced in R?DE's design and manufacturing facility in Sydney, Australia. Utilising
state of the art computer controlled machining and assembly technologies, R?DE is able to
achieve levels of finish and repeatability of the most exacting standards and tolerances.
The NT6 comes supplied with Microphone Preamp (Body), Capsule, 3 m Kevlar? fibre reinforced
cable, RM5 Stand Mount, 2-axis Swivel Mount, 2 thread adaptors, ZP1 Zip Pouch and WS5 Wind Shield.
 
FEATURES:
? 1/2? (externally biased) gold sputtered true condenser capsule ? Heavy duty satin-nickel-plated body
? 2-position variable pad: 0 dB and -10 dB ? 2-position variable high-pass filter: flat and 80 Hz ? Surface
mount technology ? Low noise ? Wide dynamic range ? Full frequency response ? Supplied complete
with 2-axis swivel mount, 2 thread adaptors, M5 clip, WS5 (Black) Wind Shield and Soft Pouch ? Designed
& manufactured in Australia ? Full 2 year guarantee 
 
Operation power:
The NT6 is designed to operate from phantom power to the P48 standard. The NT6 will operate
between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output XLR connector. 
Operation output impedance:
Output Impedance: The NT6 will operate satisfactorily into a load impedance as low as 1 kΩ. If a
load below this is used, the output signal level will be reduced. The NT6 output is balanced between
pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
 Acoustic principle:
Externally polarised 1/2" (13mm) pressure gradient condenser
Directional pattern:  Cardioid
Frequency range:
40 Hz ~ 20,000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
75 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 19 dB SPL (per IEC651, IEC268-15)
Maximum spl:
138 dB (@ 1% THD into 1 kΩ)148 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity:
-38 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB
Dynamic range din iec 651: 119 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Weight: 386 grm.
Maximum output voltage: 6 dBu (@ 1% THD into 1 kΩ)
Pin assignment:
3 pin XLR, balanced output between pin 2(+), pin (-) & pin 1 (ground)
 

Weight0.33 kg1.12 kg0.71 kg0.19 kg0.10 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.33 kg
Weight 1.12 kg
Weight 0.71 kg
Weight 0.19 kg
Weight 0.10 kg
Weight 2.00 kg