Audio Technica MCB4 Audio-Technica MCB4 Antenna Combiner

633.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Audio-Technica MCB4 Antenna Combiner allows the signals of up to four M3 Wireless In-Ear Monitor stereo transmitters to be combined onto a single transmitting antenna, reducing rack clutter. A wide-band unit that operates over the 440-865 MHz range, the MCB4 is designed to complement Audio-Technica M3 Wireless In-Ear Monitor Systems. It is also suitable for […]

 

Read more

Audio-Technica MCB4 Antenna Combiner allows the signals of up to four M3 Wireless In-Ear Monitor stereo transmitters to be combined onto a single transmitting antenna, reducing rack clutter.

A wide-band unit that operates over the 440-865 MHz range, the MCB4 is designed to complement Audio-Technica M3 Wireless In-Ear Monitor Systems. It is also suitable for many other in-ear wireless systems (with external BNC antenna connections) operating within the 440 to 865 MHz range. The MCB4 provides one output and four isolated transmitter inputs. All RF connectors are BNC-type.

Four jacks on the rear panel (controlled by the unit’s power switch) provide 12V DC (centre positive) to power as many as four transmitters operating on 12 volts at up to 600 mA each. Included with the unit are four DC cables appropriate for use with M3T (or like-powered) transmitters. The 12-volt supplies for powering transmitters are short-circuit protected. The unit features all-metal construction for extreme durability and protection from radio frequency interference.

  • Broadband UHF operation (440-865 MHz range)
  • Combines the signals of up to four wireless in-ear monitor transmitters into one antenna
  • Centralized power supply with ability to power four individual transmitters
  • Maintains clean signals with low distortion
  • Includes hardware for front-mounting the antenna for improved performance
  • Includes adapters to allow the unit to be mounted into a single rack space
  • Description: 4-Way Active Combiner
  • Bandwidth: 440–865 MHz
  • VSWR:
  • System Gain (per channel): 0dB Typical (within specified bandwidth)
  • Impedance: 50 ohms, typical (within specified bandwidth)
  • Termination Type: BNC Female (5 total)
  • Maximum RF Input Power: +20 dBm or 100 mW
  • Third Order Intercept Point: Greater than 25 dBm
  • Weight: 1.0 kg (2.2 lbs.)
  • Dimensions: 210 mm (8.27“) W x 176 mm
    (Base unit only) (6.93“) D x 46 mm (1.80“) H
  • Power Supply: Desktop Switching Power Supply
    Rated at 5A @ 12VDC or 60 Watts
    Input Voltage 100-240VAC via detachable IEC 320/C14 cable
    Output is provided on an overmolded 3-pin Molex style termination
  • Accessories: IEC 320/C14 power cable (for power supply); 5 – 22″ RF (BNC to BNC) cables; 4 – DC power cables; Rack kit for front-mounting antennas and adaptation to a 19″ rack
  • Transmitter power (optional): 600mA @ 12VDC – 4 outputs
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica MCB4 Audio-Technica MCB4 Antenna Combiner”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica MCB4 Audio-Technica MCB4 Antenna Combiner removeShure P9TE Monitor System transmitter removeMarmitek Stream S1 Pro Wireless HDMI from laptop to display (set) removeMarmitek Stream T2 Pro Wireless HDMI (transmitter) removeLD Systems LDMEIONE3T MEIONE Series - Transmitter for LD MEI ONE 3 In-Ear Monitoring System wireless 864,900 MHz removeAudio Technica AEW-T1000a UHF UniPak™ transmitter remove
NameAudio Technica MCB4 Audio-Technica MCB4 Antenna Combiner removeShure P9TE Monitor System transmitter removeMarmitek Stream S1 Pro Wireless HDMI from laptop to display (set) removeMarmitek Stream T2 Pro Wireless HDMI (transmitter) removeLD Systems LDMEIONE3T MEIONE Series - Transmitter for LD MEI ONE 3 In-Ear Monitoring System wireless 864,900 MHz removeAudio Technica AEW-T1000a UHF UniPak™ transmitter remove
ImageMarmitek Stream S1 Pro Wireless HDMI from laptop to displayMarmitek Stream T2 Pro Wireless HDMI (transmitter)
SKUMCB4P9TE0839008392LDMEIONE3TAEW-T1000a
Rating
Price 633.00 incl. GR VAT 880.75 incl. GR VAT 312.00 incl. GR VAT 177.00 incl. GR VAT 95.00 incl. GR VAT 460.56 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe Stream S1 Pro is a 'wireless' HDMI cable. Use this 'wireless HDMI cable' if you want to connect a laptop or PC to a display wirelessly. Ideal for presentations in a conference room. You no longer need a separate HDMI cable. It also works with laptops with only a USB-C connection (MacBook, Chromebook). No app, software or Wi-Fi connection required.Use this separate HDMI transmitter if you want to wirelessly connect an extra laptop to one monitor at the same time. Buy multiple Stream T2 Pros to connect up to 20 laptops simultaneously. You switch between connected laptops with the push of a button on the HDMI transmitter. Having a meeting and sharing presentations with a large group has never been easier.
Content

Audio-Technica MCB4 Antenna Combiner allows the signals of up to four M3 Wireless In-Ear Monitor stereo transmitters to be combined onto a single transmitting antenna, reducing rack clutter.

A wide-band unit that operates over the 440-865 MHz range, the MCB4 is designed to complement Audio-Technica M3 Wireless In-Ear Monitor Systems. It is also suitable for many other in-ear wireless systems (with external BNC antenna connections) operating within the 440 to 865 MHz range. The MCB4 provides one output and four isolated transmitter inputs. All RF connectors are BNC-type.

Four jacks on the rear panel (controlled by the unit's power switch) provide 12V DC (centre positive) to power as many as four transmitters operating on 12 volts at up to 600 mA each. Included with the unit are four DC cables appropriate for use with M3T (or like-powered) transmitters. The 12-volt supplies for powering transmitters are short-circuit protected. The unit features all-metal construction for extreme durability and protection from radio frequency interference.

  • Broadband UHF operation (440-865 MHz range)
  • Combines the signals of up to four wireless in-ear monitor transmitters into one antenna
  • Centralized power supply with ability to power four individual transmitters
  • Maintains clean signals with low distortion
  • Includes hardware for front-mounting the antenna for improved performance
  • Includes adapters to allow the unit to be mounted into a single rack space
  • Description: 4-Way Active Combiner
  • Bandwidth: 440–865 MHz
  • VSWR:
  • System Gain (per channel): 0dB Typical (within specified bandwidth)
  • Impedance: 50 ohms, typical (within specified bandwidth)
  • Termination Type: BNC Female (5 total)
  • Maximum RF Input Power: +20 dBm or 100 mW
  • Third Order Intercept Point: Greater than 25 dBm
  • Weight: 1.0 kg (2.2 lbs.)
  • Dimensions: 210 mm (8.27“) W x 176 mm
    (Base unit only) (6.93“) D x 46 mm (1.80“) H
  • Power Supply: Desktop Switching Power Supply
    Rated at 5A @ 12VDC or 60 Watts
    Input Voltage 100-240VAC via detachable IEC 320/C14 cable
    Output is provided on an overmolded 3-pin Molex style termination
  • Accessories: IEC 320/C14 power cable (for power supply); 5 - 22" RF (BNC to BNC) cables; 4 – DC power cables; Rack kit for front-mounting antennas and adaptation to a 19" rack
  • Transmitter power (optional): 600mA @ 12VDC – 4 outputs

Specifications:

- Transmit Power: Switchable 10mW, 50mW
- RF bandwidth: up to 40MHz
- Number of compatible frequencies per band: 20
- Audio frequency range: 35Hz to 15kHz
- S / N Ratio (A weighted): 90dB
- Stereo Separation: 60dB

  • Replace the HDMI cable in a meeting room with a wireless connection between a laptop and a display or projector.
  • Plug & play: no app or software required.
  • No need to connect to a (Wi-Fi) network.
  • Supports video resolutions up to Full HD 1080p/60Hz.
  • Plug the HDMI receiver into the HDMI input on your display or projector and power via a USB port.
  • Plug the HDMI transmitter into the HDMI output or USB-C port on your laptop, MacBook or Chromebook without the use of an additional power cable.
  • Turn your PC or laptop into a media center and share content wirelessly on a display mounted on a floor stand or wall mount.
 

Video/audio

Video resolution 1080p@60Hz
PC resolution Max. 1920 x 1080
HDMI standard HDMI 1.4 / HDCP 1.3
Audio formats PCM stereo

Technology

Operational frequency 5 GHz
Operating range Up to 20 metres LOS (line of sight)
Latency (delay) <120 ms
Video compression H.264

Transmitter

AV input 1 x HDMI
USB input 1 x micro-USB (PC, laptop)
Dimensions (h x w x d) 83 x 32 x 13 mm
Weight 27 grams

Receiver

AV output 1 x HDMI
USB input 1 x micro-USB (PC, laptop)
Dimensions (h x w x d) 83 x 32 x 13 mm
Weight 27 grams

General

Ambient temperature 0 ~ 40 °C
Ambient humidity 20% ~ 90%
Power 100-240 VAC 50/60 Hz, 5 VDC adapter
  • Supports video resolutions up to Full HD 1080p/60Hz.
  • Plug the HDMI receiver into the HDMI input on your display or projector and power via a USB port.
  • Plug the HDMI transmitter into the HDMI output or USB-C port on your laptop, MacBook or Chromebook without the use of an additional power cable.
  • Turn your PC or laptop into a media center and share content wirelessly on a display mounted on a floor stand or wall mount.
  • Connect up to 20 HDMI transmitters to a single HDMI receiver and easily switch between presenters with a press of a button.
  • Use your smart phone or tablet (Android or Apple) to stream content wirelessly to the receiver via the built-in AirPlay or Miracast function (screen mirroring).
 

Video/audio

Video resolution 1080p@60Hz
PC resolution Max. 1920 x 1080
HDMI standard HDMI 1.4 / HDCP 1.3
Audio formats PCM stereo

Technology

Operational frequency 5 GHz
Operating range Up to 20 metres LOS (line of sight)
Latency (delay) <120 ms
Video compression H.264

Transmitter

AV input 1 x HDMI
USB input 1 x micro-USB (PC, laptop)
Dimensions (h x w x d) 83 x 32 x 13 mm
Weight 27 grams

General

Ambient temperature 0 ~ 40 °C
Ambient humidity 20% ~ 90%
Power 100-240 VAC 50/60 Hz, 5 VDC adapter
 Use's manual [3,48 MB]
 Battery disposal information [77,1 KB]

LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set

The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!

Specifications MEI ONE Transmitter:

  • Fixed Frequencies:
    • LDMEIONE1T: 863.700 MHz
    • LDMEIONE2T: 864.100 MHz
    • LDMEIONE3T: 864.900 MHz
  • RF output power: 10 dBm
  • Gain adjustment range: + 40 dB
  • Max. audio input level: + 6 dBV
  • Front panel controls: Power On / Off, Headphones Level
  • Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
  • Input: 2 x XLR / 6.3 mm Jack (combo)
  • Power requirement: 12 - 18 V DC, 300 mA External Power Supply
  • Operating temperature: -10°C to +50°C
  • Dimensions (W x H x D): 212 x 38 x 96 mm

Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.

The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.

  • Available in the following frequency bands:
    541.500 - 566.375 MHz (C Band)
    655.500 - 680.375 MHz (D Band)
    721.500 - 746.375 MHz (G Band)
  • 25 kHz frequency spacing makes it easier to find a clear, open
  • frequency in crowded RF environments
  • Dual RF power output selection to optimize battery life
  • Digital Tone Lock™ squelch that communicates transmitter data
  • to the receiver
  • Function menu displayed in a backlit LCD window, controlled by
  • internal soft-touch controls
  • High efficiency dual companding system for flawless audio
  • Four nameable user presets
  • Battery fuel gauge on LCD readout
  • Recessed microphone input connector
  • Power/mute lock provision as well as safety door to cover controls
  • Dual-colour power/mute status indictor
  • Microphone or line input with DC bias voltage
  • 18 dB audio input level adjustment
  • Operates on two AA batteries
  • Captive locking battery compartment door
  • Adjustable squelch
  • Rugged metal housing with a reversible clothing clip
  • RF Power Output: High: 35 mW; Low: 10 mW, nominal
  • Spurious Emissions: According to National Regulations
  • Microphone Dynamic Range: >=110 dB, A-weighted
  • Instrument Dynamic Range: >=110 dB, A-weighted
  • Input Connections: High impedance, low impedance, bias
  • Batteries: Two 1.5V AA alkaline (not included)
  • Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
  • Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
  • Net Weight: 125 g
Weight0.10 kg2.00 kg0.027 kg0.027 kg1.00 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 2.00 kg
Weight 0.027 kg
Weight 0.027 kg
Weight 1.00 kg
Weight 0.10 kg