AUDIO TECHNICA ATM 650 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS

114.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
This versatile addition to the Artist Series features a new multi-stage flat grille design for precise positioning close to the sound source. Equipped with a neodymium magnet for high-output performance, the ATM650 has a frequency response tailored for clear sound reproduction of guitar cabinets, snare and percussion. Audio-Technica’s innovative dual-wall floating construction banishes handling noise. […]

 

Read more

This versatile addition to the Artist Series features a new multi-stage flat grille design for precise positioning close to the sound source. Equipped with a neodymium magnet for high-output performance, the ATM650 has a frequency response tailored for clear sound reproduction of guitar cabinets, snare and percussion. Audio-Technica’s innovative dual-wall floating construction banishes handling noise.

  • Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Durable performance for professional applications
  • Special dual-wall floating construction reduces handling noise and assures consistent performance from mic to mic
  • Hi-ENERGY® neodymium magnet for improved output and transient response
  • Multi-stage flat grille design is engineered to enable easy placement as close as possible to sound source
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal design and construction for years of trouble-free use
  • Element: Dynamic
  • Polar Pattern: Hypercardioid
  • Frequency Response: 80-17,000 Hz
  • Open Circuit Sensitivity: 56 dB (1.5 mV) re 1V at 1 Pa
  • Impedance: 300 ohms
  • Weight: 279 g (9.8 oz)
  • Dimensions: 164.2 mm (6.46“) long, 38.8 mm (1.53“) diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
Weight 0.40 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA ATM 650 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA ATM 650 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSENNHEISER E-602 II Dynamic Microphone for Strings, Kick Drum removeSENNHEISER E-906 SUPER-CARDIOID DYNAMIC MICROPHONE removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE remove
NameAUDIO TECHNICA ATM 650 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSENNHEISER E-602 II Dynamic Microphone for Strings, Kick Drum removeSENNHEISER E-906 SUPER-CARDIOID DYNAMIC MICROPHONE removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE remove
ImageSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz
SKUATM 650LDWS1000MWBETA57AH10SE00118H10SE00105H10SE00103
Rating
Price 114.00 incl. GR VAT 108.04 incl. GR VAT 175.00 incl. GR VAT 148.00 incl. GR VAT 189.00 incl. GR VAT 179.00 incl. GR VAT
Stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

AvailabilityIn stockAvailable on backorderOnly 1 left in stock (can be backordered)In stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

This versatile addition to the Artist Series features a new multi-stage flat grille design for precise positioning close to the sound source. Equipped with a neodymium magnet for high-output performance, the ATM650 has a frequency response tailored for clear sound reproduction of guitar cabinets, snare and percussion. Audio-Technica's innovative dual-wall floating construction banishes handling noise.

  • Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Durable performance for professional applications
  • Special dual-wall floating construction reduces handling noise and assures consistent performance from mic to mic
  • Hi-ENERGY® neodymium magnet for improved output and transient response
  • Multi-stage flat grille design is engineered to enable easy placement as close as possible to sound source
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal design and construction for years of trouble-free use
  • Element: Dynamic
  • Polar Pattern: Hypercardioid
  • Frequency Response: 80-17,000 Hz
  • Open Circuit Sensitivity: 56 dB (1.5 mV) re 1V at 1 Pa
  • Impedance: 300 ohms
  • Weight: 279 g (9.8 oz)
  • Dimensions: 164.2 mm (6.46“) long, 38.8 mm (1.53“) diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz
Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals

The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.


Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g

The supercardioid e 906 instrument microphone was especially designed for
guitar amplifiers, but it is also an excellent choice for percussion and brass
instruments.

Features
Lively, full sound
Very fast attack
Flat shape of microphone body perfect for guitar amps 
Three adjustable sound characteristics (bright, normal, smooth)
Hum compensating coil
Rugged metal body
Delivery Includes
e 906 microphone
MZQ 100 clamp
Pouch
User manual

Technical Data
Pick-up pattern  supercardioid 
Frequency response  40...18000 Hz 
Sensitivity in free field, no load (1kHz)  2,2 mV/Pa 
Nominal impedance  350 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  55 x 34 x 134 mm 
Weight  140 g 

  • Especially for tom and snare recording
  • Polar pattern: cardioid
  • Frequency range: 40 - 18,000 Hz
  • Impedance: 350 Ω
  • Robust metal chassis
  • Incl. special tom holder
  • Bag included
  • Dimensions: 63 x 41 mm
  • Weight: 125 g
Weight0.40 kg0.35 kg0.50 kg0.55 kg0.32 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.40 kg
Weight 0.35 kg
Weight 0.50 kg
Weight 0.55 kg
Weight 0.32 kg
Weight 0.30 kg