AUDIO TECHNICA ATM 450 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS

230.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
One of the new stars of the Artist Series remake, the ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The ATM450 also features […]

 

Read more

One of the new stars of the Artist Series remake, the ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The ATM450 also features a switchable 10 dB pad that lowers the microphone’s sensitivity, providing higher SPL capability for flexible use with a wide range of performers and system configurations. The microphone’s extended flat frequency response makes it ideal for high SPLs as well as for live and amplified acoustic instruments. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.

  • Unique side-address stick design maximizes placement options with minimal obstructions
  • Uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments
  • Integral 80 Hz HPF switch and 10 dB pad
  • Durable performance for professional applications
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Rugged, all-metal design and construction for years of trouble-free use
  • Includes isolation clamp for shock protection, secure mounting and easy positioning

 

 

 

  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 40-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 41 dB (8.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 152 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 127 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 69 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 3.5 mA typical
  • Weight: 98 g (3.5 oz)
  • Dimensions: 126.9 mm (5.00“) long, 21.0 mm (0.83“) diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8471 isolation clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; windscreen; soft protective pouch

 

Weight 0.40 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIO TECHNICA ATM 450 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIO TECHNICA ATM 450 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS removeAKG D 40 Dynamic Instrument Microphone removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeSHURE SM-57LCE - Dynamic Instrument Microphone removeELECTRO VOICE PL33 Kick-Drum Microphone, Dynamic, Supercardioid removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE remove
NameAUDIO TECHNICA ATM 450 CONDENSER HYPER-CARDIOID MICROPHONE FOR INSTRUMENTS removeAKG D 40 Dynamic Instrument Microphone removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeSHURE SM-57LCE - Dynamic Instrument Microphone removeELECTRO VOICE PL33 Kick-Drum Microphone, Dynamic, Supercardioid removeSENNHEISER E-604 CARDIOID DYNAMIC MICROPHONE remove
Image
SKUATM 450D 40PGA52-XLRSM-57LCE001808H10SE00051
Rating
Price 230.00 incl. GR VAT117.89 incl. GR VAT 165.12 incl. GR VAT 119.95 incl. GR VAT 110.00 incl. GR VAT 115.00 incl. GR VAT
Stock

In stock

Available on backorder

Only 5 left in stock

Only 5 left in stock

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderOnly 5 left in stockOnly 5 left in stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

One of the new stars of the Artist Series remake, the ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The ATM450 also features a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability for flexible use with a wide range of performers and system configurations. The microphone's extended flat frequency response makes it ideal for high SPLs as well as for live and amplified acoustic instruments. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.

  • Unique side-address stick design maximizes placement options with minimal obstructions
  • Uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments
  • Integral 80 Hz HPF switch and 10 dB pad
  • Durable performance for professional applications
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Rugged, all-metal design and construction for years of trouble-free use
  • Includes isolation clamp for shock protection, secure mounting and easy positioning

 

 

 

  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 40-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 41 dB (8.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 152 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 127 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 69 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 3.5 mA typical
  • Weight: 98 g (3.5 oz)
  • Dimensions: 126.9 mm (5.00“) long, 21.0 mm (0.83“) diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8471 isolation clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; windscreen; soft protective pouch

 

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

OVERVIEW

Cardioid dynamic kick drum mic with swivel mount and cable.

The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning.

FEATURES
  • Mountable microphone featuring swivel joint with quick-release latch for kick drum
  • Dynamic cartridge (does not require phantom power) with cardioid polar pattern
  • Tailored cartridge design for low-frequency clarity, including on bass amps
  • Includes PGA52, zipper pouch and user guide
  • XLR to XLR mic cable included
The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
  • Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
  • Professional-quality reproduction for drum, percussion, and instrument amplifier miking
  • Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
  • Pneumatic shock-mount system cuts down handling noise
  • Extremely durable under the heaviest use
  • Frequency response: 40 to 15,000 Hz
Frequency Range 40 Hz to 15 kHz
Impedance 150 Ohms
Load Impedance 310 Ohms
Sensitivity 56 dBV/Pa (Open Circuit Voltage, 1 kHz)
Color Gray
Mounting 5/8"-27 Female, Mic Clip (Included)
Construction Material Steel, Steel Wire Grille
Dimensions ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm
Weight 10.02 oz / 284 g
 

Audio Frequency Response    20 Hz - 10,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Dynamic
Finish    Textured Satin Black
Impedance, Low-Z balanced    150 Ω
Mic Type    Instrumental
Open Circuit Voltage    0.63 mV/Pascal
Polar Pattern    Supercardioid
Power Requirement    Passive
Shipping Weight    23.7 oz (672 g)
Wired/Wireless    Wired
Weight Net    12.84 oz (364 g)

The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments. Features Rugged reinforced glass-fibre body Low sensitivity to impact and handling noise Very high sound pressure handling capability Low distortion microphone Hum compensating coil Easy to position due to compact design Integral stand mount Delivery Includes 1 e 604 1 drum clip 1 pouch Technical Data Frequency Response  40.....18000 Hz Sensitivity in free field, no load (1kHz)  1,8 mV/Pa Min. terminating impedance  1000 Ohm Dimensions  d 33 x 59 mm Weight w/o cable  60 g
Weight0.40 kg0.24 kg0.80 kg1.00 kg0.35 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.40 kg
Weight 0.24 kg
Weight 0.80 kg
Weight 1.00 kg
Weight 0.35 kg
Weight 0.10 kg