AUDIO TECHNICA PRO45 Hanging Condenser Microphone

With robust construction and unobtrusive appearance, the PRO45 and PRO45W offer versatile sound-reinforcement solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphones high-SPL handling is perfect for suspension over choirs and orchestras. Available in two colors: Black (PRO45); white (PRO45W).

Hi-SPL handling is ideal for suspension over choirs and orchestras
Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
Also available in white as PRO45W

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 106 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V DC, 2 mA typical
Weight: 0.5 oz (15 g)
Dimensions: 2.24" (56.9 mm) long, 0.47" (12.0 mm) head diameter
Output Connector: 3-pin XLRM-type on cable
Cable: 25' (7.6 m) long, permanently attached
Accessories: AT8146(WH) windscreen; AT8451(WH) steel hanger

• Cardioid polar pattern
• 10 m (33 ft.) cable
• 125° pickup angle
• Especially suited for choir recordings
• Integrated spring steel clamp for optimum alignment

The new CHM 99 Condenser Hanging Microphone provides both ease of use and a high level of functionality. There is hardly any more affordable and simpler solution for recording choirs at worship centers. Suspended from the ceiling or a beam, the hanging microphone is aligned and then fixed in the correct position. Now use the spring steel clamp to adjust the correct angle, and off you go!
The CHM 99 is available in white or black.

XY stereo recording

Using two CHM 99 hanging microphones in an XY configuration (coincident pair) is a good way to make stereo recordings, particularly of choirs. However, sound source locations are defined only by intensity differences. Adjusting the angle between the microphones determines the width and depth of the stereo image.

ORTF stereo recording

Developed by the French Broadcasting Authority, this technique differs from the XY technique by recording not only intensity differences, but also delay differences. The capsules are aligned at an angle of precisely 110° and 170 mm / 6.7 in. apart.

AKG GN 30 OC., 12 inch gooseneck for D.A.M.-microphone capsules, 3/8“-connector, programmable indicator LED, incl. 10ft. cable to open-end, black, for installations

The CMX200 is a 360° revolving gooseneck microphone, designed to be used for conferences, sound reinforcements, translations and studio applications. It has a high sensitive condenser element with a unidirectional cardioid polar pattern which ensures an excellent sound quality and reduces the feedback to a strict minimum, even when exposed to vigorous, hard sound.

Thanks to its flat frequency characteristic, the CMX200 ensures a permanent high-fidelity sound, true to the userʼs voice and intonation. The dark grey color and slimline design permit a discreet blending with every possible interior or background.

• Model Name / Type: CMX20055 / Gooseneck Microphone
• Polar Pattern: Cardioid
• Impedance: 250 ohms
• Frequency Response: 50 Hz - 16 kHz
• Sensitivity: - 45 +/- 3 dB
• Dynamic Range: 113 dB
• Phantom Power 15 - 52 V DC
• Diameter: 19 mm
• Length: 600 mm

The 98H/C is wireless version of Shure\'s Beta 98 clip-on instrument mic, and is designed to work with the Shure beltpack transmitters. With the ability to handle high SPL, the Beta 98H/C is ready for the demands of brass, woodwind, and percussion, and features a flexible integrated gooseneck with clip-on clamp for secure fit and precise positioning. No external mounting hardware required.

    

• Compatibility: All Shure w/TA4F (Tiny QG)
• Microphone Type: Condenser
• Polar Pattern: Cardioid
• Frequency Response: 20Hz-20kHz
• Max SPL: 143.5dB SPL
• Signal to Noise Ratio: 63dB
• Self Noise: 31dB (A weighted)
• Connector: TA4F (For Shure)
• Color: Black
• Cable Length: 10 ft.
• Weight: .1 lb.
• Manufacturer Part Number: WB98H/C

• PA microphone with rugged, all-metal body
• Frequency response optimized for intelligibility
• Long useful life even in tough day-to-day usage
• Frequency response tailored to speech use

The DST 99 S is mounted on a table stand with an on/off switch and coiled cable with 3-pin XLR connector.

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

Polar pattern    cardioid
Frequency range    150-15,000 Hz
Sensitivity    2.2 mV/Pa (-54 dBV)
Max. SPL    133 dB (1% THD)
Equivalent noise level    21 dB-A
Signal/noise ratio (A-weighted)    73 dB
Impedance    530 ohms
Recommended load impedance    >2,000 ohms
Connector    3-pin male XLR
Finish    matte black
Net weight    805 g (1.8 lbs.)
Shipping weight    1,125 g (2.5 lbs.)