| Content |
Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO8HEx is ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance. Its low-visibility headband and cushioned support pads provide a stable, comfortable fit. Designed for professional quality vocal pickup with hands-free operation, the PRO8HEx features a pivot-mounted flexible mic boom that descends from either the left or right side.
- Ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance
- Low-visibility headband and cushioned support pads provide a stable, comfortable fit
- Pivot-mounted flexible mic boom descends from left or right side
- Hypercardioid polar pattern improves isolation of desired sound source
- Hi-ENERGY® neodymium element for articulate vocal reproduction
- 7.2\' (2.2 m) cable permanently attached between microphone and XLRM-type connector
- Also available as: PRO8HEcW - 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
- ement: Dynamic
- Polar Pattern: Hypercardioid
- Frequency Response: 200-18,000 Hz
- Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
- Impedance: 600 ohms
- Weight: 2.1 oz (60 g)
- Output Connector: 3-pin XLR on cable
- Cable: 7.2\' (2.2 m) long, 0.11" (2.8 mm) diameter miniature audio cable permanently attached between microphone and XLRM-type connector
- Accessories: AT8139L large windscreen; AT8139S small windscreen; AT8439 clothing clip
|
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g)
|
High-quality permanently polarized condenser headmic with omni-directional pick-up pattern
| Τype: | Headset | | Series Compatibility: | 3000/5000 Series |
|
ansducer Type
Electret condenser
Polar Pattern
Omnidirectional
Frequency Response
20 to 20,000 Hz
Output Impedance
N / A
Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)
Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
Signal-To-Noise Ratio
60 dB
Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB
Self-Noise (equivalent SPL, A-weighted, typical)
34 dB
Operating Temperature Range
-18°C (0°F) to 57°C (135°F)
Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
Power Requirements
+5 V DC (130 μA minimum)
Weight
19.76 g
| Features
- Excellent feedback rejection
- Microphone includes a detachable cap as integral wind/popshield
- Individually adjustable to all head sizes
- Neckband design keeps the microphone clear from shirt-collar or clothing
- Twist-proof microphone boom (Ø 2.0 mm), can be attached to the left or right side
- Microphone boom is adjustable in length and angle
- Flexible gooseneck section
- Connection cable can easily be interchanged
- All metal parts coated in a physical vapour deposition process
- Can also be used with the omni-directional HSP 2 boom microphone
Delivery Includes
- Boom microphone
- Neckband
- Connection cable
- Plastic transport case, foam-lined with cut-outs
- Operating instructions
Technical Data
- Pick-up pattern cardioid
- Frequency response 40...20 000 Hz
- Nominal impedance (@ 1 kHz) 1000 Ohm
- Min. terminating impedance 4700 Ohm
- Sensitivity in free field, no load (1kHz) 4 mV/Pa
- Maximum sound pressure level (passiv) 150 dB
- Equivalent noise level 37 dB(A)
- Current consumption ca. 250 µA
- Operating voltage (stand alone) 4,5-15 V
- Cable length 1,6 m
- Diameter microphone head 8,4 mm
- Diameter boomarm 2,4 mm
- Weight 9,2 g (without cable)
| Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth).
The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise.
A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
| Type |
Pre-polarized condenser microphone |
| Polar pattern |
cardioid |
| Frequency range |
20 Hz to 20,000 Hz |
| Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
| Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
| Equivalent noise level (IEC 60268-4) |
22 dB-A |
| Impedance |
200 ohms, electronically balanced |
| Recommended load impedance |
>2000 ohms |
| Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
| Powering |
approx. 2 mA |
| Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
| Cable |
1.5 m (5 ft.) |
| Finish |
matte black |
| Dimensions |
130 mm (5.2 in.) in dia. |
| Net weight |
30 g (1.1 oz.) exc. of connector |
| Shipping weight |
200 g / 7.1 oz. |
|
Reviews
There are no reviews yet.