Audio Technica M3R Stereo receiver for M3 in-ear monitor system

543.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R […]

 

Read more

The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.

These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

 

  • Receiving System: Double conversion superheterodyne
  • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector: 3.5 mm TRS stereo phone jack
  • Headphones Output Power: 65 mW (at 32 ohms)
  • Antenna Input: SMA-type, 50 ohms
  • Aux. Input Connector: 3.5 mm TRS stereo phone jack
  • Batteries: 2 x 1.5V AA (not included)
  • Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
  • Net Weight: 133 g (4.7 oz), without batteries
  • Accessories Included: EP3 earphone; flexible antenna

 

Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica M3R Stereo receiver for M3 in-ear monitor system”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica M3R Stereo receiver for M3 in-ear monitor system removeTOA IR-500R Infrared Wireless Receiver removeTOA WT-5810 UHF Wireless Tuner removeAKG SR 40 DIV RECEIVER DIVERSITY 1 UHF removeAKG SR 400 RECEIVER removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system remove
NameAudio Technica M3R Stereo receiver for M3 in-ear monitor system removeTOA IR-500R Infrared Wireless Receiver removeTOA WT-5810 UHF Wireless Tuner removeAKG SR 40 DIV RECEIVER DIVERSITY 1 UHF removeAKG SR 400 RECEIVER removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system remove
Image
SKUM3RIR-500RWT-5810SR 40 DIVSR 400LDMEI1000G2BPR
Rating
Price 543.00 incl. GR VAT 223.00 incl. GR VAT 329.00 incl. GR VAT 154.00 incl. GR VAT 252.00 incl. GR VAT 227.65 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

Only 5 left in stock

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockOnly 5 left in stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.

These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

 

  • Receiving System: Double conversion superheterodyne
  • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector: 3.5 mm TRS stereo phone jack
  • Headphones Output Power: 65 mW (at 32 ohms)
  • Antenna Input: SMA-type, 50 ohms
  • Aux. Input Connector: 3.5 mm TRS stereo phone jack
  • Batteries: 2 x 1.5V AA (not included)
  • Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
  • Net Weight: 133 g (4.7 oz), without batteries
  • Accessories Included: EP3 earphone; flexible antenna

 

The IR-500R Infrared Wireless Receiver is designed for use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or an electrical box.

Specification
Power Source 24 V DC (supplied from the IR-702T)
Current Consumption Max. 40 mA
Infrared Detector
Wavelength 870 nm
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Reception Angle Vertical: 80゜ (up to 30゜ movable downward)
Horizontal: 80゜ (up to 30゜ movable left or right)
Reception Area Approx. 15 m (50 ft) in a space without any obstacles
Connection Terminal 75 Ω, BNC jack
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Filter section: Polycarbonate, optical cut filter
Base: ABS resin, off-white
Dimensions 70 (W) × 120 (H) × 72 (D) mm (2.76" × 4.72" × 2.83“)
Weight 220 g (0.49 lb) (unit only)

 

The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.

Specification
(*1) 0 dB = 1 V
Power Source AC mains (supplied AC adapter must be used)
Power Consumption 130 mA (12 V DC)
Receiving Frequency 636 - 865 MHz(*2), UHF
Channel Selectable 16 channels
Receiving System Double super-heterodyne
Diversity System Space diversity
Mixing Output MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack
Mixing Input -20 dB(*1), 10 kΩ, unbalanced, phone jack
Antenna Rod antenna
Receiving Sensitivity 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 18 - 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator ANT A/B, Audio (peak), Battery alarm, Channel number
Channel Check Usable frequencies scanning
S/N Ratio 104 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1% or less (typical)
Frequency Response 100 - 15,000 Hz, ±3 dB
Operating Temperature -10℃ to +50℃
Finish Resin, black
Dimensions 206 (W) × 40.6 (H) × 152.7 (D) mm (excluding antenna)
Weight 590 g
Accessory AC adapter(*3) …1

 

Δέκτης diversity 1 συχνότητας UHF (710-865mHz). Διαμόρφωση FM, εύρος 40-20kHz. Έξοδος MIC ή LINE level με XLR ή unbalanced jack 1/4. Κατάλληλος για όλους τους πομπούς της σειράς 40.

The SR 400 diversity receiver is your best choice for cost-efficient,
high-performance multichannel systems. Up to 12 channels* can be
used simultaneously within the same subband and even large systems
will work smoothly in environments hostile to RF transmission.

Being compatible with professional WMS 4000 antenna splitters,
power supplies, and high quality antennas, the WMS 400 enables
you to set up highly complex wireless systems. In Auto Setup mode,
the receiver will scan the available bands, find an interference-free channel,
and transmit the related frequency data to the assigned transmitter via infrared.
This technique significantly reduces the time it takes to set up a multichannel
system. A Rehearsal function identifying dead spots, a programmable display
clearly indicating all important system parameters, twocolor display backlighting
warning the user of critical conditions from a distance, and a transmitter battery
status display on the receiver enhance reliability and add to ease of use.

Features:

    * Integrated frequency scanner with frequency management database
    * Up to 12 channels can be used simultaneously in each subband
    * Infrared data transmission link
    * Rehearsal function for finding dead spots
    * Programmable warning functions using two-color display backlighting

Specifications:

    * Carrier frequency range: 650 to 680, 680 to 710, 720 to 750,
                                          760 to 790, 790 to 820, 835 to 862 MHz
    * Modulation: FM
    * Audio bandwidth: 35 to 20,000 Hz
    * THD:

Battery disposal information [77,1 KB] LD Systems MEI1000G2 The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands. Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously. * license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
  • Model name: LDMEI1000G2BPR
  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 60 Hz - 16 kHz
  • S/N ratio: 80 dB
  • THD:
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Escape, Set, Volume
  • Indicators: LC Display, Low Battery, Power
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 13 hrs., battery-dependent
  • Width: 65 mm
  • Height: 90 mm
  • Depth: 24 mm
Weight0.20 kg0.22 kg0.59 kg1.00 kg0.97 kg0.33 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.22 kg
Weight 0.59 kg
Weight 1.00 kg
Weight 0.97 kg
Weight 0.33 kg