| Content |
The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.
The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Input Connection: Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +5V - Batteries: Two 1.5V AA, not included
- Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
Depending on battery type and use pattern. - Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
- Net Weight: 81 g without batteries
|
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.
| Power Source | 24 V DC (supplied from the IR-702T) | | Current Consumption | Max. 30 mA |
Infrared Detector
| Wavelength | 870 nm | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Filter section: Polycarbonate, optical cut filter | | Dimensions | 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“) | | Weight | 100 g (0.22 lb) (unit only) | | Accessory | Stand mounting bracket …1, Bracket mounting screw …2 |
|
The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 250 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 64 selectable frequencies | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity (true diversity) | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | | Antenna Output | 75 Ω, BNC (Gain 0 dB) | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | | Channel Check | Usable frequencies scanning | | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1 % or less (typical) | | Frequency Response | 100 Hz - 15 kHz, ±3 dB | | Operating Temperature | -10 ℃ to +50 ℃ | | Finish | Resin, black | | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | | Weight | 700 g | | Accessory | AC adapter(*3) …1, Wireless antenna …2 | | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units) |
|
The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.
These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.
- Receiving System: Double conversion superheterodyne
- RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
- Headphone Output Connector: 3.5 mm TRS stereo phone jack
- Headphones Output Power: 65 mW (at 32 ohms)
- Antenna Input: SMA-type, 50 ohms
- Aux. Input Connector: 3.5 mm TRS stereo phone jack
- Batteries: 2 x 1.5V AA (not included)
- Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
- Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
- Net Weight: 133 g (4.7 oz), without batteries
- Accessories Included: EP3 earphone; flexible antenna
|
General Description
The most-trusted wireless monitoring system gets even better. With upgraded features, this bodypack receiver sets the standard by which all other monitoring systems will be judged. For example, the compact receiver features adaptive diversity for super-reliable reception. The headphone cable is utilized as a second antenna to banish audio dropouts. Operating the EK 300 IEM G3 is also easy due to its intuitive menu navigation and highly-visible backlit graphic display. A switchable Hi Boost and a multi-level limiter complete the package. After the performance, the entire bodypack receiver can simply be placed in an optional charging station to charge the optional rechargeable battery.
Features- Sturdy metal housing
- 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
- Enhanced frequency bank system with up to 16 compatible frequencies
- Adaptive diversity for high reception quality
- Pilot tone squelch for eliminating RF interference when transmitter is turned off
- Automatic frequency scan feature searches for available frequencies
- Enhanced AF frequency range
- Wireless synchronization of receiver parameter from transmitter
- User-friendly menu operation with more control options
- Illuminated graphic display
- Auto-Lock function avoids accidental changing of settings
- HDX compander for crystal-clear sound
- Receiver features battery indicatation in 4 steps
- HiBoost, adjustable limiter, stereo/focus mode, balance
- Contacts for recharging BA 2015 accupack directly in the receiver
- Wide range of accessories adapts the system to any requirement
Delivery Includes- 1 EK 300 IEM G3 diversity receiver
- 1 IE 4 earphones
- 2 AA-size batteries
- 1 user manual
|
The P9R is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. It offers premium features like RF Scan and Automatic Gain Control for unparalleled RF stability and channel availability, all packed in the thinnest form factor available. Patent-pending CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels from one bodypack for quick and easy reference.
Features:
Ultra-thin, low profile bodypack allows discreet placement on the performer
Enhanced digital stereo encoder provides an expansive soundstage for excellent audio clarity and detail
RF Scan: stand where the artist will be on stage and instantly check RF level
Automatic Gain Control greatly prevents signal dropout due to RF overload and allows more channels to be used simultaneously
Syncs to a P9T transmitter quickly and easily over IR link using Scan and Sync
Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
Separate, easily visible audio and RF status indicator LED's
Audio level and battery life metering
Selectable high-frequency EQ boost (+3/+6 dB @ 10 kHz)
Volume and balance controls
Extruded aluminum construction for rugged dependability
Specifications:
Front-End RF Filtering: –3 dB point 30.5 MHz from center frequency
Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
RF Sensitivity (20 dB SINAD): 2.2 µV
Squelch Threshold (±3 dB SINAD): 22 dB SINAD
Adjacent Channel Rejection: >70 dB
Intermodulation Attenuation: >70 dB
Blocking: >80 dB
Image Rejection: >100 dB
Audio Output Power (1kHz @ |
Reviews
There are no reviews yet.