| Content |
The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.
The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Input Connection: Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +5V - Batteries: Two 1.5V AA, not included
- Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
Depending on battery type and use pattern. - Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
- Net Weight: 81 g without batteries
|
- Three selectable UHF frequencies for interference-free reception.
- Diversity: maximum transmission reliability even in difficult environments. The system automatically selects the antenna providing the best signal.
- Adjustable squelch
- Multichannel capability for simultaneous use of up to nine channels (maximum number of channel depends on local frequency plans).
- All-metal case
- High Definition Audio Performance technology ensures the legendary, realistic AKG sound and perfect audio transmission.
|
The IR-500R Infrared Wireless Receiver is designed for use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or an electrical box.
| Power Source | 24 V DC (supplied from the IR-702T) | | Current Consumption | Max. 40 mA |
Infrared Detector
| Wavelength | 870 nm | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Reception Angle | Vertical: 80゜ (up to 30゜ movable downward)
Horizontal: 80゜ (up to 30゜ movable left or right) | | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Filter section: Polycarbonate, optical cut filter
Base: ABS resin, off-white | | Dimensions | 70 (W) × 120 (H) × 72 (D) mm (2.76" × 4.72" × 2.83“) | | Weight | 220 g (0.49 lb) (unit only) |
|
Wireless receiver module 6 frequencies for WA-1812, 1812C. Combined with WM-3210, 3220 hand, WM-3310 lapel, WM-3310H head |
The wireless tuner WT-5805 is a PLL-synthesizer controlled double superheterodyne diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 200 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 64 selectable frequencies | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | | Channel Check | Usable frequencies scanning | | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1 % or less (typical) | | Frequency Response | 100 Hz - 15 kHz, ±3 dB | | Operating Temperature | -10 ℃ to +50 ℃ | | Finish | Resin, black | | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | | Weight | 700 g | | Accessory | AC adapter(*3) …1, Wireless antenna …2 | | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5805 unit)
MB-WT4 (for rack mounting two WT-5805 units) |
|
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.
| Power Source | 24 V DC (supplied from the IR-702T) | | Current Consumption | Max. 30 mA |
Infrared Detector
| Wavelength | 870 nm | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Filter section: Polycarbonate, optical cut filter | | Dimensions | 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“) | | Weight | 100 g (0.22 lb) (unit only) | | Accessory | Stand mounting bracket …1, Bracket mounting screw …2 |
|
Reviews
There are no reviews yet.