Audio Technica U851R Cardioid condenser boundary microphone

277.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: U851R Category:
Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements – available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With […]

 

Read more

Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements – available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics eliminate need for external power module
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U851R) and white (U851RW)

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 108 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 4 mA typical
  • Switch: Flat, roll-off
  • Weight: 9.2 oz (262 g)
  • Dimensions: 4.25″ (108.0 mm) long, 3.31″ (84.0 mm) maximum width, 0.91″ (23.0 mm) height
  • Output Connector: TB3M-type
  • Cable: 25.0′ (7.6 m) long, 0.13″ (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors

 

Weight 0.12 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica U851R Cardioid condenser boundary microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica U851R Cardioid condenser boundary microphone removeAudio Technica U841A Omnidirectional condenser boundary microphone removeAUDIO TECHNICA PRO42 Boundary Microphone removeShure MX692/C Cardioid Boundary Microphone with UHF Wireless Transmitter (UA / 782 - 806MHz) removeAudio Technica U851A Cardioid condenser boundary microphone removeAudio Technica U891RCx Cardioid condenser boundary microphone with switch remove
NameAudio Technica U851R Cardioid condenser boundary microphone removeAudio Technica U841A Omnidirectional condenser boundary microphone removeAUDIO TECHNICA PRO42 Boundary Microphone removeShure MX692/C Cardioid Boundary Microphone with UHF Wireless Transmitter (UA / 782 - 806MHz) removeAudio Technica U851A Cardioid condenser boundary microphone removeAudio Technica U891RCx Cardioid condenser boundary microphone with switch remove
Image
SKUU851RU841APRO42MX692/CU851AU891RCx
Rating
Price 277.00 incl. GR VAT 325.00 incl. GR VAT 99.00 incl. GR VAT 525.02 incl. GR VAT 300.00 incl. GR VAT 352.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

In stock

In stock

In stock

AvailabilityIn stockIn stockAvailable on backorderIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics eliminate need for external power module
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U851R) and white (U851RW)

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 108 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 4 mA typical
  • Switch: Flat, roll-off
  • Weight: 9.2 oz (262 g)
  • Dimensions: 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
  • Output Connector: TB3M-type
  • Cable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors

 

The U841A delivers exceptionally intelligible audio reproduction in a super-compact, low-profile design. Equipped with UniGuard® RFI-shielding technology, this omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording, television and conferencing in surface-mount applications. The U841A has a 360° pickup angle and operates on battery or phantom power.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and silicon foam bottom pad minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance black finish for minimum visibility
  • Operates on battery or phantom power

 

  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Omnidirectional in hemisphere above mounting surface
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: Phantom: -39 dB (11.2 mV) re 1V at 1 Pa Battery: -40 dB (10.0 mV) re 1V at 1 Pa
  • Impedance: Phantom: 200 ohms Battery: 270 ohms
  • Maximum Input Sound Level: Phantom: 132 dB, 1 kHz at 1% T.H.D. Battery: 122 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 111 dB, 1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 73 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
  • Switch: Off, on-flat, on-roll-off
  • Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories: AT8531 power module; battery; soft protective pouch

 

The PRO42\'s low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules. Very low-profile design for minimum visibility Wide-range condenser element with low-mass diaphragm for superior performance Uniform polar pattern for maximum rejection of unwanted sounds Rugged design and construction 25\' (7.6 m) cable permanently attached between microphone and XLRM-type connector Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface) Frequency Response: 70-14,000 Hz Open Circuit Sensitivity: -38 dB (12.5 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 105 dB, 1 kHz at Max SPL Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa Phantom Power Requiremens: 9-52V DC, 2 mA typical Weight: 1.2 oz (35 g) Dimensions: 1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height Output Connector: 3-pin XLRM-type on cable Cable: 25\' (7.6 m) long, permanently attached

Type of Transmitter     UHF Frequency Agile
Input Connector     Internal fitting for interchangeable capsules
Type of Microphone     Electret Condenser Boundary Microphone
Polar Pattern     Cardioid (Supplied)
Interchangeable Mic Heads     Yes - R183B Omnidirectional, R184B Supercardioid and R185B Cardioid cartridges available
Frequency Response     50Hz to 17kHz
Battery Type/Approx. Life     9 Volt Alkaline - 7 hours based on alkaline battery
# Of Channels     Over 100 channels between 692-862MHz, depending on locale
Mute Switch     Programmable Touch-Sensitive Switch
Level Control     Gain Adjustment Range: -6 to 34dBs
Antenna Type     Internal
Display     Microphone Status & Battery Life LEDs
Dimensions     3.625 x 1.8 x 5.17 (92 x 46 x 131mm) (WxHxD)

Offering outstanding Audio-Technica sound for surface-mount applications, the U851A features a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. This battery- or phantom-powered condenser microphone accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. Its heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. With superior off-axis rejection and maximum gain-before-feedback, this professional microphone sets audio-quality standards in challenging acoustic environments.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance black finish for minimum visibility
  • Operates on battery or phantom power

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 Pa
  • Impedance: Phantom: 200 ohms Battery: 270 ohms
  • Maximum Input Sound Level: Phantom: 133 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 111 dB,1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
  • Switch: Off, on-flat, on-roll-off
  • Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
  • Accessories: AT8531 power module; battery; soft protective pouch

 

A wide range condenser microphone with a cardioid polar pattern, the ultra-smart U891RCx is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the unit's external contact closure ability allows a user to trigger an external device - a camera, for instance - from a switch on the microphone. Another ease-of-use feature: the microphone's electronic on-off switch can be set to three operating modes: touch-on/touch-off, press to talk, and press to mute. The mic is also equipped an 80 Hz low-cut UniSteep® filter to reduce pickup of low-frequency ambient noise. Its red LED status indicator can be controlled remotely. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; a unique rotating PivotPoint® connector changes the cable exit point - no tools required. It requires 11 to 52V DC phantom power, which operates the microphone and switch circuitry.

  • Designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup situations
  • Ultra-quiet electronic switch can be set to any of three operating modes: "touch-on/touch-off," "touch-to-talk" and "touch-to-mute“
  • External contact closure capability permits control of remote devices from microphone switch
  • External LED control allows for accurate depiction of the live status of the microphone
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance black finish for minimum visibility

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 104 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 4 mA typical
  • Weight: 266g
  • Dimensions: 108.0mm long, 84.0mm maximum width, 23.0mm height
  • Output Connector: TB5M-type
  • Cable: 7.6m long, 3.2mm diameter, 5-conductor shielded cable (2 conductors under shield; 3 control wires outside shield); TA5F-type connector at microphone end, output end stripped and tinned for connection to electronic device

 

Weight0.12 kg0.10 kg0.25 kg0.40 kg0.10 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.12 kg
Weight 0.10 kg
Weight 0.25 kg
Weight 0.40 kg
Weight 0.10 kg
Weight 0.10 kg