Audio Technica U851RW Cardioid condenser boundary microphone

277.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: U851RW Category:
The white-finished version of the U851R, the phantom-powered U851RW features a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. Offering outstanding speech intelligibility and transparent sound quality for surface-mount applications, the U851RW accepts interchangeable condenser elements – available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case […]

 

Read more

The white-finished version of the U851R, the phantom-powered U851RW features a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. Offering outstanding speech intelligibility and transparent sound quality for surface-mount applications, the U851RW accepts interchangeable condenser elements – available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851RW is equipped with self-contained electronics, eliminating the need for an external power module.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics eliminate need for external power module
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U851R) and white (U851RW)

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 108 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 4 mA typical
  • Switch: Flat, roll-off
  • Weight: 9.2 oz (262 g)
  • Dimensions: 4.25″ (108.0 mm) long, 3.31″ (84.0 mm) maximum width, 0.91″ (23.0 mm) height
  • Output Connector: TB3M-type
  • Cable: 25.0′ (7.6 m) long, 0.13″ (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors

 

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica U851RW Cardioid condenser boundary microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica U851RW Cardioid condenser boundary microphone removeAKG CBL 410 PCC BLACK Condenser microphone boundary for use with any PC or laptop removeElectro voice PolarChoice Boyndary Microphone (cardioid, hyper-cardioid, figure-8, omni) removeAudio Technica ES945 Omnidirectional fixed charge condenser boundary microphone removeAudio Technica U843R Three channel boundary cardioid condenser microphone removeShure MX396/C Dual Elements Microflex Boundary Microphone remove
NameAudio Technica U851RW Cardioid condenser boundary microphone removeAKG CBL 410 PCC BLACK Condenser microphone boundary for use with any PC or laptop removeElectro voice PolarChoice Boyndary Microphone (cardioid, hyper-cardioid, figure-8, omni) removeAudio Technica ES945 Omnidirectional fixed charge condenser boundary microphone removeAudio Technica U843R Three channel boundary cardioid condenser microphone removeShure MX396/C Dual Elements Microflex Boundary Microphone remove
Image
SKUU851RWCBL 410 PCC BLACK001816ES945U843RMX396/C Dual Elements
Rating
Price 277.00 incl. GR VAT 110.00 incl. GR VAT410.00 incl. GR VAT 179.50 incl. GR VAT 452.00 incl. GR VAT 525.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The white-finished version of the U851R, the phantom-powered U851RW features a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. Offering outstanding speech intelligibility and transparent sound quality for surface-mount applications, the U851RW accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851RW is equipped with self-contained electronics, eliminating the need for an external power module.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics eliminate need for external power module
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U851R) and white (U851RW)

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 108 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 4 mA typical
  • Switch: Flat, roll-off
  • Weight: 9.2 oz (262 g)
  • Dimensions: 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
  • Output Connector: TB3M-type
  • Cable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors

 

About the AKG Acoustics CBL 410 PCC The AKG CBL 410 PCC Conference Microphone Set (Black) is a simple to use, plug and play desktop microphone for use with any PC or laptop. It improves audio quality incredibly when making a conference via VOIP. The microphone reproduces the voice with a clear and natural sound. With its 3.5 mm stereo jack, it is a 100% plug and play device. No drivers are needed. Its ability to be cascaded makes the CBL 410 PCC the perfect tool for modern communication for both single person use in the office and/or multi-person use in a modern meeting room. This microphone provides optimum intelligibility and audio quality for your meetings. The CBL 410 PCC is also an excellent choice for recording applications. AKG Acoustics CBL 410 PCC Includes
  • AKG 3x CBL 410 PCC PC Boundary Layer Microphones
  • GHAP1 USB Adapter
  • AKG Warranty
AKG Acoustics CBL 410 PCC Features
  • Small and inconspicuous
  • Exceptionally rugged
  • Excellent sound quality
  • High sensitivity
  • Low self-noise
AKG Acoustics CBL 410 PCC Specifications
Polar pattern Omnidirectional
Microphone Type Back electret condenser microphone
Frequency response 50 Hz to 20 kHz
Impedance 2000 ohms ±30% at 1000 Hz
Sensitivity -42 dB ±3 dB (7.9 mV/Pa)Sensitivity:
Maximum current consumption 0.5 mA
Supply voltage 1.5 to 5 V DC
Cable length 100cm (40“)
Connector TRS mini jack
Electro-Voice PolarChoice Boundary Satellite Microphone Specifications: Generation Element: Dual condenser,back electret Frequency Response: 50 Hz to 20,000 Hz Polar Patterns: Omnidirectional,Cardioid,Supercardioid,Hypercardioid Sensitivity: Open Circuit Voltage,1 kHz:5.6mV/Pascal Clipping Level (1% THD): >135 dB SPL Equivalent Noise:     Dynamic Range: >109 dB Output Impedance,1 kHz: 200 ohms Power Requirements: Phantom,12 - 52 VDC Current Consumption: < 8 mA with P12 supp Polarity: Pin 2 positive,referenced to pin 3,with positive pressure on the diaphragm Accessories Furnished: All versions of PolarChoice ship with the Shock Mount Kits and EV\'s Multiport™ windscreen.

The new Engineered Sound.

This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360º pickup angle, and is available in two colors: black (ES945) and white (ES945W).

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
  • Low-profile element provides uniform omnidirectional polar pattern with 360º acceptance angle
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Self-contained power module with XLRM-type output connector
  • Rugged all-metal case with a two-layer steel mesh grille
  • Isolators provide mechanical dampening of mounting-surface vibration
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Available in two colors: black (ES945) and white (ES945W)
  • RoHS compliant-free from all substances specified in the EU directive on hazardous substances

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 40-18,000 Hz
  • Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 112 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Weight: 63 g (2.2 oz)
  • Dimensions: 69.0 mm (2.72“) long, 28.0 mm (1.10“) diameter
  • Output Connector: Integral 3-pin XLRM-type

 

With three cardioid condenser elements in a single housing, the phantom-powered U843R offers a remarkably versatile tool for surface-mount installations. Levers on the microphone base allow easy reorientation of two elements to offer 360° or 300° coverage. Since elements can be powered and used individually or in any combination, further flexibility is easily achieved. For example, with two elements powered, the microphone can provide a figure-of-eight polar pattern; with a single element powered, the microphone functions as a standard cardioid boundary microphone. Installation and repositioning are extremely quick, thanks to four recessed pathways on the base of the microphone that enable the user to route the cable as required to accommodate any installation requirements; no tools or disassembly are needed. The microphone also offers Audio-Technicaʼs innovative UniGuard® RFI-shielding technology.

  • Three cardioid condenser elements mounted in a single housing
  • Easily reposition two elements (via levers on the microphone base) to offer 360° or 300° coverage; each element can be powered and used individually or in any combination
  • Also functions as a stereo boundary microphone
  • Provides full, efficient and flexible coverage—fewer microphones required
  • Small-diameter capsules near boundary eliminate phase distortion and deliver clear, high-output performance
  • Low-frequency attenuation improves sound pickup without affecting voice quality
  • Cable routes through any of four recessed pathways on the microphone base (or down for direct feed through a table surface); no tools or disassembly required
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Heavy die-cast case and non-slip silicone foam bottom pad minimizes coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Hemispherical Cardioid x3 (combine to omni-directional or bidirectional)
  • Frequency Response: 70-16,000 Hz
  • Open Circuit Sensitivity: –37 dB (14.1 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (Typical): 105 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical
  • Switch: The lever of elements can adjust the proper position
  • Weight (Less Cable): 160 g
  • Dimensions: 20.0 mm - height
    85.0 mm – maximum body diameter
  • Cable: 7.6 m long (permanently attached to microphone), 4 mm diameter, 6 conductor, shielded cable; output end stripped and tinned for connection to electronic device
  • Accessories Furnished: Soft protective pouch

 


Condenser
    Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Recommended Uses
    Conference/Installed

Available Options
    MX396C/DUAL     Dual-Element 0-180 Degrees, Cardioid, back or bottom exit cable, mute output, LED input
    MX396/TRI     Dual-Element 90-0-90 mic, adjustable to 120-120-120 degrees, Cardioid, back or bottom exit cable, mute output, LED input

The Microflex® Multi-Element Boundary microphone delivers a unique and versatile tool for conference room installations.

Clean and simple in appearance, Multi-Element Boundary mics come in two or three element configurations, combining the coverage of multiple microphones into one small, compact package.

Weight0.10 kg1.00 kg0.30 kg0.10 kg0.10 kg0.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 1.00 kg
Weight 0.30 kg
Weight 0.10 kg
Weight 0.10 kg
Weight 0.40 kg