Audio Technica U853AW Cardioid condenser hanging microphone

The white-finished version of U853A, the U853AW cardioid condenser hanging microphone is ideal for speech, theater, orchestra and choir sound reinforcement and recording. The microphone's fast transient response and low distortion characteristics allow every complex detail to be heard with all its impact-rich, vibrant qualities faithfully reproduced. Equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference, the U853AW accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. The battery- or phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.

• Designed for suspension over choirs, instrumental groups and theater stages
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Low-profile design with low-reflectance finish for minimum visibility
• Available in two colors: black (U853A) and white (U853AW)
• Operates on battery or phantom power

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 30-20,000 Hz
• Low Frequency Roll Off: 80 Hz, 18 dB/octave
• Open Circuit Sensitivity: Phantom: 42 dB (7.9 mV) re 1V at 1 Pa Battery: -43 dB (7.0 mV) re 1V at 1 Pa
• Impedance: Phantom: 200 ohms Battery: 270 ohms
• Maximum Input Sound Level: Phantom: 133 dB, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: Phantom: 109 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPL
• Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
• Phantom Power Requiremens: 11-52V DC, 2 mA typical
• Battery Type: 1.5V AA/UM3
• Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
• Switch: Off, on-flat, on-roll-off
• Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
• Accessories: AT8153(WH) two-stage foam windscreen; AT8451(WH) steel hanger; AT8531 power module; AT8438 5/8“-27 stand adapter; battery

The 98H/C is wireless version of Shure\'s Beta 98 clip-on instrument mic, and is designed to work with the Shure beltpack transmitters. With the ability to handle high SPL, the Beta 98H/C is ready for the demands of brass, woodwind, and percussion, and features a flexible integrated gooseneck with clip-on clamp for secure fit and precise positioning. No external mounting hardware required.

    

• Compatibility: All Shure w/TA4F (Tiny QG)
• Microphone Type: Condenser
• Polar Pattern: Cardioid
• Frequency Response: 20Hz-20kHz
• Max SPL: 143.5dB SPL
• Signal to Noise Ratio: 63dB
• Self Noise: 31dB (A weighted)
• Connector: TA4F (For Shure)
• Color: Black
• Cable Length: 10 ft.
• Weight: .1 lb.
• Manufacturer Part Number: WB98H/C

The evolution e 908 instrument microphone is available in four variants:
as e 908 D for drums and percussion
as e 908 B for wind instruments, congas, and drums with free-floating suspension system
as e 908 B ew for the wireless miking of saxophones using an evolution wireless instrument transmitter
as e 908 T ew for the wireless miking of trumpets using an evolution wireless instrument transmitter

• Pick-up pattern : cardioid
• Frequency response : 40 ... 20 000 Hz
• Sensitivity in free field, no load : (1kHz) 4 mV/Pa, 0,56mV/Pa (e 908T-ew)
• Equivalent noise level : e908B-ew = 30 dB(A); e908B & e908D = 35 dB(A), e908T-ew = 39 dB (A)
• Max. Sound pressure level (aktiv) : 147 dB
• Nominal impedance : 100 Ohm (e908B & e908D)
• Min. terminating impedance : 2000 Ohm (e908B & e908D)
• Phantom powering : 12 - 48 V / 3 mA (e908B & e908D)
• Weight : ca. 140 g
• Dimensions : Ø 47 x 193 mm

Features:

• Miniature cardioid condenser clamp-on microphone with shock mounted capsule
• Ideal for miking drums and percussions
• Including wireless direct adapter for easy use with AKG pocket transmitters
• Detachable microphone cable
• Integrated gooseneck
• Continuously adjustable vise type clamp

Recommended For:

• Drums
• Brass
• Recording
• Percussions

Standard Accessories:

• A400 adapter
• H518 Drum bracket
• Microphone bag
• W44 Windscreen

Specs:

• Polar pattern cardioid
• Frequency range 60 Hz to 20 kHz
• Sensitivity 5 mV/Pa (-46 dBV)
• Max. SPL 130/132 dB SPL (for 1%/3% THD)
• Equivalent noise level 31 dB(A)
• Signal/noise ratio (A-weighted) 63 dB
• Impedance = 2000 ohms
• Current consumption

• Miniature cardioid condenser clamp-on microphone with shock mounted capsule, ideal for miking drums and percussions plus brass
• For use with the B 29 L battery power supply, MPA V L phantom power adapter, or PT 40 or PT 400 transmitters (AKG WMS bodypack transmitters)
• Includes an AKG W 44 Windscreen, an AKG A 518 stabilizer knee, a 5-ft. (1.5-m) plug-in connecting cable with 3-pin mini XLR connector, an A 400 adapter for attaching a PT 40 or PT 400 bodypack transmitter and a protective case
• Integrated gooseneck
• Continuously adjustable vice type clamp
• Type: pre-polarized condenser microphone
• Polar pattern: Cardioid
• Frequency range: 60 Hz to 20,000 Hz
• Sensitivity at 1 kHz: 5 mV/Pa (-46 dBV re 1 V/Pa)
• Impedance: = 200 ohms
• Recommended load impedance: = 2000 ohms
• Max. SPL for 1%/3% THD: 130/132 dB SPL
• Equivalent noise level: 31 dB(A) to DIN 45412
• Cable length / Connector: 1.5 m (5 ft.) / 3-pin mini XLR
• Finish: Matte black
• Size (microphone only): length: 200 mm (7.9 in.), max. width: 47 mm (1.9 in.)
• Net weight (microphone and cable): C 518 M: 220 g (7.8 oz.), C 518 ML: 110 g (3.9 oz.)
• Shipping weight: C 518 M: 450 g (15.9 oz.), C 518 ML: 330 g (11.7 oz.)

• Mini condenser microphone with clip-on mount and flexible gooseneck
  
• Polar pattern: cardioid
  
• Frequency range: 60 Hz to 20 kHz
  
• Sensitivity: 5 mV/Pa (-46 dBV)
  
• Max. SPL: 130/132 dB SPL (for 1 %/3 % THD)
  
• Equivalent noise level: 31 dB(A)
  
• Power requirement: B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
  
• Connector: 3-pin XLR
  
• Cable: 1.5 m (5 ft.)
  
• Finish: Matte black
  
• Adapter plate included for easy attachment to PT 400 and PT 40.