Audio Technica U853RW Cardioid condenser hanging microphone

289.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: U853RW Category:
The white-finished version of U853R, the U853RW cardioid condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. The phantom-powered microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. The U853RW also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of […]

 

Read more

The white-finished version of U853R, the U853RW cardioid condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. The phantom-powered microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. The U853RW also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 115 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Cable: 25.0′ (7.6 m) long (permanently attached to microphone), 0.13″ (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector
  • Accessories: AT8153(WH) two-stage foam windscreen; AT8451(WH) steel hanger; AT8538 power module; AT8438 5/8“-27 stand adapter
  • Designed for suspension over choirs, instrumental groups and theater stages
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U853R) and white (U853RW)
Weight 0.02 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica U853RW Cardioid condenser hanging microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica U853RW Cardioid condenser hanging microphone removeAKG CGN 99H/S 38cm Hypercardioid Gooseneck Microphone removeSHURE MX-412D-C - Microflex Cardioid Desktop removeAKG DGN 99E dynamic cardioid Gooseneck Microphone WITH XLR removeAKG C 518 ML Miniature cardioid condenser clamp-on microphone removeAKG C 516 ML Cardioid instrument microphone with miniature mounting bracket remove
NameAudio Technica U853RW Cardioid condenser hanging microphone removeAKG CGN 99H/S 38cm Hypercardioid Gooseneck Microphone removeSHURE MX-412D-C - Microflex Cardioid Desktop removeAKG DGN 99E dynamic cardioid Gooseneck Microphone WITH XLR removeAKG C 518 ML Miniature cardioid condenser clamp-on microphone removeAKG C 516 ML Cardioid instrument microphone with miniature mounting bracket remove
ImageAKG CGN 99HS 38cm Hypercardioid Gooseneck Microphone-artsound
SKUU853RWCGN 99H/SMX412DCDGN 99EC 518 MLC 516 ML
Rating
Price 289.00 incl. GR VAT149.00 incl. GR VAT 340.00 incl. GR VAT 178.99 incl. GR VAT 253.00 incl. GR VAT 150.00 incl. GR VAT
Stock

In stock

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockOnly 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe white-finished version of U853R, the U853RW cardioid condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. The phantom-powered microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. The U853RW also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 115 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector
  • Accessories: AT8153(WH) two-stage foam windscreen; AT8451(WH) steel hanger; AT8538 power module; AT8438 5/8“-27 stand adapter
  • Designed for suspension over choirs, instrumental groups and theater stages
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in two colors: black (U853R) and white (U853RW)
  • Hypercardioid polar pattern
  • 38 cm  long
  • 95° pickup angle
  • For acoustically difficult environments
  • Connects easily via XLR connector
The hypercardioid polar pattern with its narrow 95° pickup angle is suited best for situations where noise typically occurs from all sides (particularly in worship centers), where people talk into the microphone from a greater distance, or where several talkers are grouped side by side. Two different lengths are available. The .exible joint ensures optimum alignment of the gooseneck to any talker position. Several options are available for installation, i.e., stand, tabletop installation, and lockable. Choosing polar patterns Selecting the correct polar pattern for installed sound is difficult since it depends on a variety of factors. Of course the acoustics of the room play a key role. For highly reverberant rooms such as worship centers, a hypercardioid polar pattern will be the best choice to avoid high levels of unwanted noise. Correct placement of the loudspeakers is also essential. If the speakers project right at the capsule, a hypercardioid will be your best bet. The most difficult task, however, is trying to judge how the talkers will behave. For talkers who are inexperienced or move around a lot, be sure to choose a cardioid polar pattern for reliable pickup; talkers at a greater distance from the mic will be served best by a hypercardioid. The microphone shall be a hypercardioid gooseneck microphone. Its pickup angle shall be 95 degrees; frequency range 50 Hz to 19 kHz; sensitivity 12 mV/Pa; max. SPL 125 dB; electrical impedance
Polar pattern Hypercardioid
Frequency range 50 to 19,000 Hz
Sensitivity 12 mV/PA = -38 dBV re 1 V/Pa
Max. SPL 125 dB (for 1% THD)
Equivalent noise level
Signal/noise ratio (A-weighted) >73 dB
Impedance =2,000 ohms
Supply voltage English: 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
Powering
Connector 3-pin male XLR
Finish matte black
Dimensions CGN 99 H/S: 13.5 x 380 mm (0.5 x 15 in.); CGN 99 H/L: 13.5 x 580 mm (0.5 x 23 in.)
Net weight CGN 99 H/S: 480 g (17 oz.); CGN 99 H/L: 500 g (17.7 oz.)

  Now More Flexible Than Ever. The Microflex Gooseneck Microphones. The Microflex Gooseneck microphones bring a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound.

 

Microflex Gooseneck microphones are available in four models with a variety of heights and mounting styles to choose from. One model includes a silent mute switch with LED indicator, a Shure Microflex exclusive. And every Microflex Gooseneck features high sensitivity and balanced, transformerless output for maximum immunity to electromagnetic hum and RF interference, even over long cable runs. Each Microflex Gooseneck microphone comes with a complete installation kit, including:

  • Shock Mount
  • Locking Flange Mount
  • This microphone requires phantom power.
  • PA microphone with rugged, all-metal body
  • Frequency response optimized for intelligibility
  • Long useful life even in tough day-to-day usage
  • Frequency response tailored to speech use
Rugged, affordable dynamic cardioid gooseneck microphone for general public address and communications use. The DGN 99 provides a frequency response tailored to speech use for optimum intelligibility as well as good offaxis rejection for high gain before feedback and suppression of unwanted ambient noise. The all-metal body ensures a long useful life for the microphone even in tough day-to-day use.

The DGN 99 E features a built-in XLR connector for quick connection, while the DGN 99 has been designed for permanent (single-hole or screw-on) installation and comes with a 6-ft. 4-in. (2-m) fixed, unterminated cable.

 

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

  • Miniature cardioid condenser clamp-on microphone with shock mounted capsule, ideal for miking drums and percussions plus brass
  • For use with the B 29 L battery power supply, MPA V L phantom power adapter, or PT 40 or PT 400 transmitters (AKG WMS bodypack transmitters)
  • Includes an AKG W 44 Windscreen, an AKG A 518 stabilizer knee, a 5-ft. (1.5-m) plug-in connecting cable with 3-pin mini XLR connector, an A 400 adapter for attaching a PT 40 or PT 400 bodypack transmitter and a protective case
  • Integrated gooseneck
  • Continuously adjustable vice type clamp
  • Type: pre-polarized condenser microphone
  • Polar pattern: Cardioid
  • Frequency range: 60 Hz to 20,000 Hz
  • Sensitivity at 1 kHz: 5 mV/Pa (-46 dBV re 1 V/Pa)
  • Impedance: = 200 ohms
  • Recommended load impedance: = 2000 ohms
  • Max. SPL for 1%/3% THD: 130/132 dB SPL
  • Equivalent noise level: 31 dB(A) to DIN 45412
  • Cable length / Connector: 1.5 m (5 ft.) / 3-pin mini XLR
  • Finish: Matte black
  • Size (microphone only): length: 200 mm (7.9 in.), max. width: 47 mm (1.9 in.)
  • Net weight (microphone and cable): C 518 M: 220 g (7.8 oz.), C 518 ML: 110 g (3.9 oz.)
  • Shipping weight: C 518 M: 450 g (15.9 oz.), C 518 ML: 330 g (11.7 oz.)
  • Cardioid instrument microphone with miniature mounting bracket
  • High mechanical-noise attenuation
  • Including wireless direct adapter for easy use with AKG pocket transmitters
  • Detachable microphone cable
  • Ideal for miking up accordions and guitar, piano, keyboard, or organ amplifiers
Polar patterncardiod
Frequency range60 Hz to 20 kHz
Sensitivity5 mV/Pa (-46 dBV)
Max. SPL130/132 dB SPL (bei k = 1 %/3 %)
Equivalent noise level31 dB(A)
Signal/noise ratio (A-weighted)63 dB
Impedance= 2000 ohms
Current consumption
Weight0.02 kg0.48 kg0.40 kg0.48 kg0.33 kg0.32 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.02 kg
Weight 0.48 kg
Weight 0.40 kg
Weight 0.48 kg
Weight 0.33 kg
Weight 0.32 kg