Audio Technica U855QL Cardioid dynamic gooseneck microphone

Designed for use as a high-quality talk-back, paging and dispatch microphone in entertainment, commercial and industrial applications, the U855QL features a versatile gooseneck design which allows for flexible positioning and dependable performance. Its tailored frequency response ensures excellent intelligibility in environments with excessive ambient noise. An XLRM-type connector insert at the base allows the microphone to be plugged directly into an XLRF-type panel jack or microphone cable.

• Designed for use as a high-quality talk-back, paging & dispatch microphone in entertainment, commercial and industrial applications
• Extremely rugged all-metal construction for long-lasting performance
• Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
• Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
• Easy-to-adjust, rugged gooseneck permits quick positioning
• Frequency response tailored for excellent intelligibility in environments with excessive ambient noise
• Polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Protective screen reduces wind noise and "popping” when used extremely close

• Element: Dynamic
  
• Polar Pattern: Cardioid
  
• Frequency Response: 150-16,000 Hz
  
• Open Circuit Sensitivity: –53 dB (2.2 mV) re 1V at 1 Pa
  
• Impedance: 600 ohms
  
• Weight: 278 g (9.8 oz)
  
• Dimensions: 448.0 mm (17.64“) long,
  30.0 mm (1.18“) head diameter,
  19.0 mm (0.75“) base diameter
  
• Output Connector: Integral 3-pin XLRM-type

• PA microphone with rugged, all-metal body
• Frequency response optimized for intelligibility
• Long useful life even in tough day-to-day usage
• Frequency response tailored to speech use

The DST 99 S is mounted on a table stand with an on/off switch and coiled cable with 3-pin XLR connector.

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

Polar pattern    cardioid
Frequency range    150-15,000 Hz
Sensitivity    2.2 mV/Pa (-54 dBV)
Max. SPL    133 dB (1% THD)
Equivalent noise level    21 dB-A
Signal/noise ratio (A-weighted)    73 dB
Impedance    530 ohms
Recommended load impedance    >2,000 ohms
Connector    3-pin male XLR
Finish    matte black
Net weight    805 g (1.8 lbs.)
Shipping weight    1,125 g (2.5 lbs.)

Recommended For:

• Brass
• Drums
• Percussions
• Woodwinds

Features:

• Miniature condenser clip-on microphone for wind instruments, drums, and percussions
• Miniature gooseneck for accurate microphone alignment
• Including wireless direct adapter for easy use with AKG pocket transmitters
• Detachable microphone cable
• Transducer shock mount for high mechanical-noise rejection

Standard Accessories:

• A400 adapter
• Microphone bag
• W44 Windscreen

Specs:

• Polar pattern cardioid
• Frequency range 60 Hz to 20 kHz
• Sensitivity 5 mV/Pa (-46 dBV)
• Max. SPL 130/132 dB SPL (for 1 %/3 % THD)
• Equivalent noise level 31 dB(A)
• Signal/noise ratio (A-weighted) 63 dB
• Impedance = 2000 ohms
• Current consumption

• PA microphone with rugged, all-metal body
• Frequency response optimized for intelligibility
• Long useful life even in tough day-to-day usage
• Frequency response tailored to speech use

The DGN 99 E features a built-in XLR connector for quick connection, while the DGN 99 has been designed for permanent (single-hole or screw-on) installation and comes with a 6-ft. 4-in. (2-m) fixed, unterminated cable.

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

Shure MX418D-C Gooseneck Cardioid Condenser Microphone

Microflex? Gooseneck microphones bring a whole new meaning to the word flexible
with their fully adjustable gooseneck. Designed for easy replacement and available in
cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges
offer wide frequency response and accurate sound reproduction for a wide variety of applications
such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges
fit every model in the Microflex product line for enhanced convenience and consistent sound.

Microflex Gooseneck microphones are available in four models with a variety of heights and mounting
styles to choose from. One model includes a silent mute switch with LED indicator, a Shure Microflex
exclusive. And every Microflex Gooseneck features high sensitivity and balanced, transformerless output
for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.

Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to noise over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (M412D/MX418D)
New brighter LED improves visibility under strong ambient lighting M412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers M412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SW/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SW/MX418SE)

Microphone Specifications:
 
Frequency Response
50 to 17,000 Hz
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%

The evolution e 908 instrument microphone is available in four variants:
as e 908 D for drums and percussion
as e 908 B for wind instruments, congas, and drums with free-floating suspension system
as e 908 B ew for the wireless miking of saxophones using an evolution wireless instrument transmitter
as e 908 T ew for the wireless miking of trumpets using an evolution wireless instrument transmitter

Pick-up pattern : cardioid
Frequency response : 40 ... 20 000 Hz
Sensitivity in free field, no load : (1kHz) 4 mV/Pa, 0,56mV/Pa (e 908T-ew)
Equivalent noise level : e908B-ew = 30 dB(A); e908B & e908D = 35 dB(A), e908T-ew = 39 dB (A)
Max. Sound pressure level (aktiv) : 147 dB
Nominal impedance : 100 Ohm (e908B & e908D)
Min. terminating impedance : 2000 Ohm (e908B & e908D)
Phantom powering : 12 - 48 V / 3 mA (e908B & e908D)
Weight : ca. 140 g
Dimensions : Ø 47 x 193 mm