Audio Technica U859QL Cardioid condenser quick-mount gooseneck microphone

198.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: U859QL Category:
Designed to plug directly into a panel- or desk-mounted XLRF-type connector, the U859QL features an ultra-flexible small-diameter gooseneck and a fixed cardioid element. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone is 480.0 mm long. Designed for high-quality sound […]

 

Read more

Designed to plug directly into a panel- or desk-mounted XLRF-type connector, the U859QL features an ultra-flexible small-diameter gooseneck and a fixed cardioid element. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone is 480.0 mm long.

  • Designed for high-quality sound reinforcement, professional recording and broadcasting
  • Superior off-axis rejection for maximum gain before feedback
  • Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no ‘memory’ permits quick positioning into desired shape
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Self-contained electronics eliminate need for external power module
  • Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 100-16,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 43 dB (7.0 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 140 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 111 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Weight: 5.4 oz (152 g)
  • Dimensions: 18.90″ (480.0 mm) long, 0.48″ (12.3 mm) head diameter, 0.74″ (18.9 mm) base diameter
  • Output Connector: Integral 3-pin XLRM-type
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica U859QL Cardioid condenser quick-mount gooseneck microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica U859QL Cardioid condenser quick-mount gooseneck microphone removeAKG DGN 99 dynamic cardioid Gooseneck Microphone removeAKG C 747 V11 Gooseneck Condenser Microphone removeAKG CGN 99 C/S 38cm Hypercardioid Gooseneck Microphone removeSHURE MX-412SE-C-12-inch -30 cm- Gooseneck Condenser Mic. removeAKG C 519 M Miniature Clip-on Condenser Microphone remove
NameAudio Technica U859QL Cardioid condenser quick-mount gooseneck microphone removeAKG DGN 99 dynamic cardioid Gooseneck Microphone removeAKG C 747 V11 Gooseneck Condenser Microphone removeAKG CGN 99 C/S 38cm Hypercardioid Gooseneck Microphone removeSHURE MX-412SE-C-12-inch -30 cm- Gooseneck Condenser Mic. removeAKG C 519 M Miniature Clip-on Condenser Microphone remove
Image
SKUU859QLDGN 99C 747 V11CGN 99C/SMX412SECC 519 M
Rating
Price 198.00 incl. GR VAT 178.99 incl. GR VAT 697.00 incl. GR VAT 128.00 incl. GR VAT 280.00 incl. GR VAT 205.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Designed to plug directly into a panel- or desk-mounted XLRF-type connector, the U859QL features an ultra-flexible small-diameter gooseneck and a fixed cardioid element. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone is 480.0 mm long.

  • Designed for high-quality sound reinforcement, professional recording and broadcasting
  • Superior off-axis rejection for maximum gain before feedback
  • Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no 'memory' permits quick positioning into desired shape
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Self-contained electronics eliminate need for external power module
  • Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
  • Element: Fixed-charge back plate permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 100-16,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 43 dB (7.0 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 140 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 111 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Weight: 5.4 oz (152 g)
  • Dimensions: 18.90" (480.0 mm) long, 0.48" (12.3 mm) head diameter, 0.74" (18.9 mm) base diameter
  • Output Connector: Integral 3-pin XLRM-type
  • PA microphone with rugged, all-metal body
  • Frequency response optimized for intelligibility
  • Long useful life even in tough day-to-day usage
  • Frequency response tailored to speech use
Rugged, affordable dynamic cardioid gooseneck microphone for general public address and communications use. The DGN 99 provides a frequency response tailored to speech use for optimum intelligibility as well as good offaxis rejection for high gain before feedback and suppression of unwanted ambient noise. The all-metal body ensures a long useful life for the microphone even in tough day-to-day use.

The DGN 99 E features a built-in XLR connector for quick connection, while the DGN 99 has been designed for permanent (single-hole or screw-on) installation and comes with a 6-ft. 4-in. (2-m) fixed, unterminated cable.

 

Ticket window, bank counter
Reception desk, restaurant
Houses of worship

  • Immune to RF interference
  • Speech optimized frequency range
  • Enhanced hypercardioid polar pattern
  • High SPL capability
  • Premium microphone for ubiquitous application

A History of Sound: The C 747, the so called „pencil microphone“, was first built in 1987. Due to its excellent technical specifications, especially the wide and flat frequency range, it was used for the recording of all kinds of musical instruments, even those with very low frequencies. Because of its brilliant sound reproduction and its inconspicuous optical appearance, it was quickly known as an ideal overhead microphone.
Thank to the narrow polar pattern it solved the crosstalk problem (when recording multiple instruments at once) and the problem of picking up sounds from distant spots in a room. But for all that, due to the help of the acoustically well balanced, short interference tube, it didnʼt face one of the biggest problems of most shotgun microphones – the change of the polar pattern over the frequency. This is one of many reasons why this microphone found its way into a great number of Broadcast Stations, Recording Studios, Theatres, Opera Houses, Churches, Conference Rooms and Lecture Halls.

Another big advantage of the C 747 is that the microphone will not change the sound or level too much even when the person speaking is moving a lot. So it came that the C 747 finally found its way into installed sound systems as a perfect speech and lectern microphone. The C 747 is now one of the most versatile microphones in the AKG product range and over the years it has been available in various versions and model types such as hanging module, capsule for modular gooseneck microphones and in a boundary layer microphone.

Whatʼs New in V11: As it is more and more used in conference applications, we carefully redesigned the C 747 to better cope with some specific installed sound issues.
The new C 747 V11 will have an integrated RFi shield to block out unwanted interference by mobile phones, wireless mics and the like. Also we have fine tuned the frequency response to give especially the spoken word an outstanding presence, without changing the flavour of the classic C 747 sound.

An enhanced polar pattern provides consistent off-axis rejection to control ambient noise and feedback in acoustically difficult environments. This makes the C 747 V11 an excellent choice for noisy discussion groups or reverberant pulpits while it is forgiving enough to clearly pick up talkers moving around in front of the microphone. A switchable LF roll-off filter suppresses mechanical noise. The low-impedance transformerless preamp operates on 9 to 52 V phantom power.
The C 747 V11 ships with an extensive accessory set including a shock mount/adapter, mini gooseneck, stand adapter, mounting clamp, thread link, and windscreen.

SPECIFICATIONS:

Polar patternhypercardioid
Frequency range30 to 18,000 Hz
Sensitivity8.5 mV/Pa (-42 dBV)
Max. SPL133 dB
Equivalent noise level (IEC 60268-4)32 dB
Equivalent noise level21 dB-A
Signal/noise ratio (A-weighted)73 dB
Bass filter12 dB/octave at 150 Hz
Impedance400 ohms
Recommended load impedance>1500 ohms
Supply voltage9 to 52 V phantom power to DIN 45596
Powering

Polar pattern    Cardioid
Frequency range    70 to 18,000 Hz
Max. SPL    125 dB (for 1% THD)
Equivalent noise level    73 dB
Impedance    =2,000 ohms
Supply voltage    9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
Powering   

 Shure MX412SE/C 12-inch (30 cm) Gooseneck Condenser Microphone, Shock Mount, Flange Mount, 10-foot (3 m) Side-Exit Cable (or Bottom-Exit), Snap-Fit Foam Windscreen, In-Line Preamp, Cardioid.

Shure Microflex MX412SE/C microphones are miniature gooseneck-mounted electret condenser microphones designed for speech and vocal pickup. Their high sensitivity and broad frequency range make them suitable for recording, as well as sound reinforcement applications.

The MX412SE/C microphone can be screwed onto a mic stand or the supplied 5/8 inch 27-threaded flange. They can be easily changed from side-exit to bottom-exit to conceal the cable. All models include an in-line preamplifier and a 3 m (10 ft) cable. Each microphone is available with interchangeable cardioid, supercardioid, or omnidirectional cartridges.

  • Mini condenser microphone with clip-on mount and flexible gooseneck
  • Polar pattern: cardioid
  • Frequency range: 60 Hz to 20 kHz
  • Sensitivity: 5 mV/Pa (-46 dBV)
  • Max. SPL: 130/132 dB SPL (for 1 %/3 % THD)
  • Equivalent noise level: 31 dB(A)
  • Power requirement: B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
  • Connector: 3-pin XLR
  • Cable: 1.5 m (5 ft.)
  • Finish: Matte black
  • Adapter plate included for easy attachment to PT 400 and PT 40.
Weight0.10 kg0.48 kg0.75 kg0.48 kg0.40 kg0.43 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.48 kg
Weight 0.75 kg
Weight 0.48 kg
Weight 0.40 kg
Weight 0.43 kg