Audio Technica U891RCx Cardioid condenser boundary microphone with switch

352.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: U891RCx Category:
A wide range condenser microphone with a cardioid polar pattern, the ultra-smart U891RCx is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the unit’s external contact closure ability allows a user to trigger an external device – a camera, for instance – from a switch on the microphone. […]

 

Read more

A wide range condenser microphone with a cardioid polar pattern, the ultra-smart U891RCx is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the unit’s external contact closure ability allows a user to trigger an external device – a camera, for instance – from a switch on the microphone. Another ease-of-use feature: the microphone’s electronic on-off switch can be set to three operating modes: touch-on/touch-off, press to talk, and press to mute. The mic is also equipped an 80 Hz low-cut UniSteep® filter to reduce pickup of low-frequency ambient noise. Its red LED status indicator can be controlled remotely. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; a unique rotating PivotPoint® connector changes the cable exit point – no tools required. It requires 11 to 52V DC phantom power, which operates the microphone and switch circuitry.

  • Designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup situations
  • Ultra-quiet electronic switch can be set to any of three operating modes: “touch-on/touch-off,” “touch-to-talk” and “touch-to-mute“
  • External contact closure capability permits control of remote devices from microphone switch
  • External LED control allows for accurate depiction of the live status of the microphone
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance black finish for minimum visibility

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 104 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 4 mA typical
  • Weight: 266g
  • Dimensions: 108.0mm long, 84.0mm maximum width, 23.0mm height
  • Output Connector: TB5M-type
  • Cable: 7.6m long, 3.2mm diameter, 5-conductor shielded cable (2 conductors under shield; 3 control wires outside shield); TA5F-type connector at microphone end, output end stripped and tinned for connection to electronic device

 

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Audio Technica U891RCx Cardioid condenser boundary microphone with switch”

Your email address will not be published. Required fields are marked *

Quick Comparison

Audio Technica U891RCx Cardioid condenser boundary microphone with switch removeAudio Technica ES945 Omnidirectional fixed charge condenser boundary microphone removeSENNHEISER E-901 Condenser Microphone removeElectro voice PolarChoice Boyndary Microphone (cardioid, hyper-cardioid, figure-8, omni) removeShure MX396/C Dual Elements Microflex Boundary Microphone removeLD SYSTEMS LDBM1 CONDENSER BOUNDARY ELECTRET MICROPHONE remove
NameAudio Technica U891RCx Cardioid condenser boundary microphone with switch removeAudio Technica ES945 Omnidirectional fixed charge condenser boundary microphone removeSENNHEISER E-901 Condenser Microphone removeElectro voice PolarChoice Boyndary Microphone (cardioid, hyper-cardioid, figure-8, omni) removeShure MX396/C Dual Elements Microflex Boundary Microphone removeLD SYSTEMS LDBM1 CONDENSER BOUNDARY ELECTRET MICROPHONE remove
Image
SKUU891RCxES945H10SE00101001816MX396/C Dual ElementsLDBM1
Rating
Price 352.00 incl. GR VAT 179.50 incl. GR VAT 239.00 incl. GR VAT410.00 incl. GR VAT 525.00 incl. GR VAT 79.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

A wide range condenser microphone with a cardioid polar pattern, the ultra-smart U891RCx is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the unit's external contact closure ability allows a user to trigger an external device - a camera, for instance - from a switch on the microphone. Another ease-of-use feature: the microphone's electronic on-off switch can be set to three operating modes: touch-on/touch-off, press to talk, and press to mute. The mic is also equipped an 80 Hz low-cut UniSteep® filter to reduce pickup of low-frequency ambient noise. Its red LED status indicator can be controlled remotely. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; a unique rotating PivotPoint® connector changes the cable exit point - no tools required. It requires 11 to 52V DC phantom power, which operates the microphone and switch circuitry.

  • Designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup situations
  • Ultra-quiet electronic switch can be set to any of three operating modes: "touch-on/touch-off," "touch-to-talk" and "touch-to-mute“
  • External contact closure capability permits control of remote devices from microphone switch
  • External LED control allows for accurate depiction of the live status of the microphone
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance black finish for minimum visibility

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 104 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 4 mA typical
  • Weight: 266g
  • Dimensions: 108.0mm long, 84.0mm maximum width, 23.0mm height
  • Output Connector: TB5M-type
  • Cable: 7.6m long, 3.2mm diameter, 5-conductor shielded cable (2 conductors under shield; 3 control wires outside shield); TA5F-type connector at microphone end, output end stripped and tinned for connection to electronic device

 

The new Engineered Sound.

This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360º pickup angle, and is available in two colors: black (ES945) and white (ES945W).

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
  • Low-profile element provides uniform omnidirectional polar pattern with 360º acceptance angle
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Self-contained power module with XLRM-type output connector
  • Rugged all-metal case with a two-layer steel mesh grille
  • Isolators provide mechanical dampening of mounting-surface vibration
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Available in two colors: black (ES945) and white (ES945W)
  • RoHS compliant-free from all substances specified in the EU directive on hazardous substances

 

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 40-18,000 Hz
  • Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 112 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Weight: 63 g (2.2 oz)
  • Dimensions: 69.0 mm (2.72“) long, 28.0 mm (1.10“) diameter
  • Output Connector: Integral 3-pin XLRM-type

 

The half-cardioid e 901 is the perfect condenser microphone for kick drum. It is highly robust and step-resistant. It benefits from an integrated preamp.

Pick-up pattern : half-cardioid
Frequency response : 20...20 000 Hz
Sensitivity in free field, no load : (1kHz) 0,5 mV/Pa
Max. Sound pressure level (aktiv) : 154 dB / SPL
Phantom powering : 48 V / 1,1 mA
Nominal impedance : Min. terminating impedance : 1000 Ohm
Dimensions : 126,5 x 105 x 26,5 mm
Weight : ca. 550 g

Electro-Voice PolarChoice Boundary Satellite Microphone Specifications: Generation Element: Dual condenser,back electret Frequency Response: 50 Hz to 20,000 Hz Polar Patterns: Omnidirectional,Cardioid,Supercardioid,Hypercardioid Sensitivity: Open Circuit Voltage,1 kHz:5.6mV/Pascal Clipping Level (1% THD): >135 dB SPL Equivalent Noise:     Dynamic Range: >109 dB Output Impedance,1 kHz: 200 ohms Power Requirements: Phantom,12 - 52 VDC Current Consumption: < 8 mA with P12 supp Polarity: Pin 2 positive,referenced to pin 3,with positive pressure on the diaphragm Accessories Furnished: All versions of PolarChoice ship with the Shock Mount Kits and EV\'s Multiport™ windscreen.
Condenser
    Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Recommended Uses
    Conference/Installed

Available Options
    MX396C/DUAL     Dual-Element 0-180 Degrees, Cardioid, back or bottom exit cable, mute output, LED input
    MX396/TRI     Dual-Element 90-0-90 mic, adjustable to 120-120-120 degrees, Cardioid, back or bottom exit cable, mute output, LED input

The Microflex® Multi-Element Boundary microphone delivers a unique and versatile tool for conference room installations.

Clean and simple in appearance, Multi-Element Boundary mics come in two or three element configurations, combining the coverage of multiple microphones into one small, compact package.

Boundary-layer Microphone The LD Systems BM1 is an electret condenser microphone with a hemispherical directional characteristic.

For micing upright and grand pianos on stage or in the studio. Additional applications in the area of conference technology, transmission of roundtable discussions and theatrical performances.

Product type Microphones
Type Installations
Frequency response 50 - 20000 Hz
Directivity half ball
Nominal impedance 250 Ohm(s)
Max. SPL (1% THD @ 1kHz) 135 dB
Phantom power requierements 48 V
Microphone input XLR (3-pin)
Width 27 mm
Height 74.5 mm
Diameter 93.5 mm
Accessories (included) cables (Mini-XLR / XLR, 6 m)
Weight 0,345 kg
Weight0.10 kg0.10 kg1.00 kg0.30 kg0.40 kg0.35 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.10 kg
Weight 1.00 kg
Weight 0.30 kg
Weight 0.40 kg
Weight 0.35 kg