Content |
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT95E and AT95EX
- 20 to 22,000Hz frequency response
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT95E and AT95EX
- 20 to 22,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
Model |
AT-VM95E |
Type |
VM Stereo Dual Magnet |
Mounting |
1/2” centres |
Frequency Response |
20 - 22,000 Hz |
Channel Separation |
20 dB (1 kHz) |
Output Channel Balance |
2.0 dB (1 kHz) |
Output Voltage |
4.0 mV (@ 1 kHz, 5 cm/sec) |
Vertical Tracking Angle |
23° |
Vertical Tracking Force Range |
1.8 - 2.2g (standard 2.0 g) |
Stylus Shape |
Elliptical |
Stylus Size |
0.3 x 0.7 mil |
Stylus Construction |
Bonded Round Shank |
Cantilever |
Aluminium Pipe |
Coil Impedance |
3.3 kΩ (1 kHz) |
Coil Inductance |
550 mH (1 kHz) |
DC Resistance |
485 Ω |
Static Compliance |
17 x 10 – 6 cm / dyne |
Dynamic Compliance |
7 x 10 – 6 cm / dyne (100 Hz) |
Wire Used for Coil |
T.P. Copper |
Recommended Load Impedance |
47,000 Ω |
Recommended Load Capacitance |
100-200 pF |
Cartridge Weight |
6.1g |
Dimensions |
17.2 x 18.9 x 28.3 ( H x W x D mm) |
Replacement Stylus |
AT-VMN95E |
Accessories Included |
Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers |
|
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec.
|
11 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
| -
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz - 3 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0 g (30 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1.680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Q.Bert |
| EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT
* Adjustable cartridge which will fit in a traditional headshell mount
* Replaceable diamond tip |
Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.
ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI
Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.
With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.
Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.
TECHNICAL DATA CONCORDE DIGITRACK
Output voltage at 1000 Hz, 5cm/sec. 8 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 22 dB Channel separation at 15 kHz 15 dB Frequency range 20-20.000 Hz Frequency response 20-18.000 Hz -3 /- 2dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 m Compliance, dynamic, lateral 12 m/mN Stylus type Spherical Stylus tip radius R18 Equivalent stylus tip mass 0,6 mg Tracking force range 2-4 g (20-40 mN) Tracking force, recommended 3,0 g (30 mN) Tracking angle 20 Internal impedance, DC resistance 1325 Ohm Internal inductance 765 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/stylus Red/Red Cartridge weight 18,5 g Replacement stylus unit Digitrack | A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
Output voltage at 1000Hz, 5cm/sec. |
10 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
20 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at -3dB |
20-18.000 Hz |
Frequency response |
20-18.000 Hz +3/- 2dB |
FIM distortion at recomm. tracking force DIN 45.542 |
|
Tracking ability at 315 Hz at recomm. tracking force |
120 μm |
Compliance, dynamic lateral |
11 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
1,5-10,0 g (15-100 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Internal impedance, DC resistance |
1680 Ohm |
Internal inductance |
920 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge weight |
18,5 g |
Replacement stylus unit |
Ortofon-Serato S-120 |
| The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
Technical data |
|
Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
Channel balance at 1 kHz |
|
Channel separation at 1 kHz |
> 22 dB |
Channel separation at 15 kHz |
> 15 dB |
Frequency range at - 3dB |
20-25.000 Hz |
Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
> 65 µm |
Compliance, dynamic, lateral |
13 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Tracking force range |
1,8-2,2 g (18-22 mN) |
Tracking force, recommended |
2 g (20 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
100 Ohm |
Recommended load impedance |
47 kOhm / |
Cartridge body material |
Noryl |
Cartridge colour |
Black |
Cartridge weight |
4,1 g |
|
Reviews
There are no reviews yet.