M-AUDIO M-Track 2X2 Audio interface

FEATURES 24-bit/192kHz Resolution for Professional Recording and Monitoring

Professional studio-quality recording in a portable desktop form factor

Capture every nuance and subtlety of your performance

Large central control for easy volume adjustment

Includes standard USB and USB-C connection cables

+48V phantom power switch to accommodate all microphone types

Tailor-made gain and impedance stage for a pristine, accurate DI signal

With independent level controls

• Power: USB-bus-power
• Dimensions 6.0” x 2.8” x 7.8
• 15.2 cm x 7.1 cm x 19.8 cm
• Weight 2.0 lbs.

• Minimum System Requirements:
• Standard USB 2.0 or USB-C Port
• Windows: 7 (32 or 64 bit) OSX: 10.8

The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

Yamaha AUDIOGRAM3 Computer Recording System Specifications:

• Mic/Hi-Z input: 1
• Audio Format: USB AUDIO 1.1, 16bit/44.1kHz
• Combo Connectors: 1
• Stereo In connectors: Phone connector x 2 (L/MONO x 2, R x 2)
• USB Connector: To Host x 1
• Headphone connector: Stereo Phone connector x 1
• Stereo Out connector: Phone connector x 2 (L, R)
• Power Supply: USB powered
• Dimensions (W x H x D): 180 mm x 61 mm x 112 mm (7-1/8" x 2-3/8" x 4-3/8“)
• Accessories: CUBASE AI DVD, Owner's Manual, USB Cable
  
  System Requirements
• Windows Vista
• Windows-based computer with built-in USB interface
• OS: Windows Vista
• CPU: 1GHz or better Intel Core / Pentium / Celeron processor
• Memory: More than 1GB
  
  Windows XP
• Windows-based computer with built-in USB interface
• OS: Windows XP Professional / XP Home Edition
• CPU: 750MHz or better Intel Core / Pentium / Celeron processor
• Memory: More than 128MB
  
  Macintosh
• Macintosh computer with built-in USB interface
• OS: Mac OS X 10.3.3 or higher
• CPU: Intel CPU / Macintosh G3 processor 300 MHz or better
• Memory: More than 128MB
  
  Cubase AI4 System Requirements:
• 
  
• Windows
• OS: Windows XP Professional SP1 / XP Home Edition SP1 / Windows Vista (32-bit)
• CPU: Intel Pentium 1.4GHz or better
• Available Memory: More than 512MB
• Hard Disk: Free disk space of 1GB or more
• Audio Interface: Windows DirectX / ASIO compatible
  
  Macintosh
• OS: Mac OS X 10.4 or higher
• CPU: Power Mac G4 1GHz or Core Solo 1.5GHz or better
• Available Memory: More than 512MB
• Hard Disk: Free disk space of 1GB or more

nio 2 | 4 is a 2 In / 4 Out mobile USB interface for the modern music maker. Nio 2 | 4 features Novationʼs unique ʽDirect FXʼ technology, placing a powerful multi-effects engine within nio 2 | 4ʼs custom drivers. These effects rest close to the core of your computer, working independently of other software and providing powerful ultra-low latency effects for hassle-free, real time jamming and recording. This same unique environment ensures rock-solid, lightning-fast performance, making it the ideal interface solution for home recording, live performing and DJʼing alike; one size fits all. With two headphones outputs, itʼs also an ideal solution for the classroom environment.

• 1 XLR (with phantom power)
• 1 TS Jack
• 2 RCA Phono
• Two inputs simultaneously only - either stereo RCA phono or the XLR and Jack

• 4 RCA Phono
• 2 stereo 1/4" Headphones Jacks

• 44.1/48kHz sample rate
• 24-bit resolution

• Data ports: 1 x USB 1.1

• MIDI i/o

• Operating system: Mac OSX 10.3.9 or greater (Leopard also supported) or Windows XP with Service Pack 2 or greater (Vista 32/64 also supported)
• Minimum Computer spec: Mac - G3/600MHz or G4/667MHz, both with 256MB RAM or PC - Pentium 3/500MHz/256MB RAM (machines running Vista will require a higher spec)
  
  Interfacing: USB 1.1 compatible USB connector (also compatible with USB 2.0), 28/24 awg USB cable recommended

• 633g
• 45.4mm (H) x 144mm (W) x 149mm (D)

MINIMUM SYSTEM REQUIREMENTS - Mac

    * OS X Leopard 10.5.8 or Snow Leopard 10.6.3
    * 1 GB RAM (2 GB recommended)
    * 6 GB free disk space
    * Intel® processor (no PowerPC® support)
    * One native USB port

MINIMUM SYSTEM REQUIREMENTS - PC

    * Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit Native, or Windows 7 64-bit Native
    * 1 GB RAM (2 GB recommended)
    * 5 GB free disk space
    * One native USB port

What's in the Box?

    * Mbox Mini interface
    * Pro Tools LE 8 software DVD-ROM installer (includes electronic versions of user guides, plus software plug-in bundle)
    * Mbox user guide
    * Registration information card
    * USB cable